Recent publications
- Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Hybrid Monte Carlo – Finite element simulation of microstructural evolution during annealing of severely deformed Sn-5Sb alloy", Computational Materials Science, 163, pp. 196-208, 2019
- Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., Nikan, O., "Creep life prediction for Sn-5Sb lead-free solder alloy: Model and experiment", Microelectronic Engineering, 207, pp. 55-65, 2019
- Vahdat Vasei, H., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Photocatalytic properties of solution combustion synthesized ZnO powders using mixture of CTAB and glycine and citric acid fuels", Advanced Powder Technology30(2), pp. 284-291 , 2019
- Taherkhani, K., Soltanieh, M., "Investigation of nanomechanical and adhesion behavior for AlN coating and AlN/Fe2-3 N composite coatings created by Active Screen Plasma Nitriding on Al 1050", Journal of Alloys and Compoundspp. 113-127, 2019
- Mehdizade, M., Soltanieh, M., Eivani, A.R., "Investigation of anodizing time and pulse voltage modes on the corrosion behavior of nanostructured anodic layer in commercial pure aluminum", Surface and Coatings Technology358, pp. 741-752, 2019
- Nikbakht, R., Seyedein, S.H., Kheirandish, S., Assadi, H., Jodoin, B., "The role of deposition sequence in cold spraying of dissimilar materials", Surface and Coatings Technology, 367, pp. 75-85, 2019
- Tork, N.B., Saghafian, H., Razavi, S.H., Ebrahimi, R., Mahmudi, R., "Microstructure and texture characterization of Mg-Al and Mg-Gd binary alloys processed by simple shear extrusion", Journal of Materials Research and Technology, 2019
- Vasei, H.V., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Facile synthesis of ZnO nanosheets as ultraviolet photocatalyst", Journal of Sol-Gel Science and Technology, 89(2), pp. 594-601, 2019
- Vasei, H.V., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Solution combustion synthesis of ZnO powders using various surfactants as fuel", Journal of Sol-Gel Science and Technology, 89(2), pp. 586-593, 2019
- Salt-Assisted Solution Combustion Synthesis of Ni and Ni/NiO Powders, Biglari, Z., Alamolhoda, S., Masoudpanah, S.M., Journal of Superconductivity and Novel Magnetism , 2019
- Solution Combustion Synthesis of Fe 3 O 4 Powders Using Mixture of CTAB and Citric Acid Fuels, Hadadian, S., Masoudpanah, S.M., Alamolhoda, S. Journal of Superconductivity and Novel Magnetism, 32(2), pp. 353-360, 2019
- N. Asefi, S.M. Masoudpanah, M. Hasheminiasari, "Photocatalytic performances of BiFeO3 powders synthesized by solution combustion method: The role of mixed fuels", Materials Chemistry and Physics 228 (2019) 168–174
- S. Golchinvafa, S.M. Masoudpanah, "Magnetic and microwave absorption properties of FeNi3/NiFe2O4 composites synthesized by solution combustion method", Journal of Alloys and Compounds 787 (2019) 390e396
- Z. Kalantari Bolaghi, S.M. Masoudpanah, M. Hasheminiasari, "Photocatalytic activity of ZnO/RGO composite synthesized by one-pot solution combustion method", Materials Research Bulletin 115 (2019) 191–195
- N. Asefi, M. Hasheminiasari, S.M. Masoudpanah, "Solution Combustion Synthesis of BiFeO3 Powders Using CTAB as Fuel", J. Electron. Mater., 48 (2019) 409-415.
- Dadoo, A., Boutorabi, S.M.A., Kheirandish, S., "Effect of Titanium Carbide concentration on the morphology of MC carbides in pulsed laser surface alloyed AISI H13 tool steel", Optics and Laser Technology, 112, pp. 236-244, 2019
- M. Abdi, S.G. Shabestari, “Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy”, Solid State Phenomena, 2019, Vol. 285, PP. 253-258
- S. Aliakbari Sani, H. Arabi, Sh. Kheirandish, G. R. Ebrahimi, "Flow stress modeling in a ϒ-ϒʹCobalt base superalloy by using the hyperbolic sine equation and ANN method", Iranian Journal of Materials Forming, 6, 1, 2019, pp. 44-55
- Ghaderi Hamidi, A., Arabi, H., Vahdati Khaki, J., "Sintering of a nano-crystalline tungsten heavy alloy powder", International Journal of Refractory Metals and Hard Materials, 80, pp. 204-209, 2019
- Sani, S.A., Arabi, H., Kheirandish, S., Ebrahimi, G., "Investigation on the homogenization treatment and element segregation on the microstructure of a γ/γ′-cobalt-based superalloy", International Journal of Minerals, Metallurgy and Materials, 26(2), pp. 222-233, 2019
- Amini, M., Khavandi, A., "Synergistic effects of mechanical and environmental loading in stress corrosion cracking of glass/polymer composites", Journal of Composite Materials, Article in Press, 2019
- Amini, M., Khavandi, A., "Degradation of polymer-based composites in corrosive media: experimental attempts towards underlying mechanisms", Mechanics of Time-Dependent Materials, Article in Press, 2019
- Isfahani, T., Javadpour, J., Khavandi, A., "Formation mechanism and phase transformations in mechanochemically prepared Al2 O3 -40wt% ZrO2 nanocomposite powder", Composite Interfaces, Article in Press, 2019
- Pourgharibshahi, M., Saghafian, H., Divandari, M., Timelli, G., "Controlled Diffusion Solidification Pathway of an AA 7xxx Series Aluminum Alloy", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(1), pp. 326-335, 2019
- Khorashadizade, F., Saghafian, H., Rastegari, S., "Effect of electrodeposition parameters on the microstructure and properties of Cu-TiO2 nanocomposite coating", Journal of Alloys and Compounds, 770, pp. 98-107, 2019
- Rastegari, S., Salahinejad, E., "Surface modification of Ti-6Al-4V alloy for osseointegration by alkaline treatment and chitosan-matrix glass-reinforced nanocomposite coating", Carbohydrate Polymers, 205, pp. 302-311, 2019
- Baghbani Barenji, A., Eivani, A.R., Hasheminiasari, M., Park, N., Jafarian, H.R., "Application of hot forming cold die quenching for facilitating equal channel angular pressing of AA2024 aluminum alloy", Journal of Alloys and Compounds, 791, pp. 265-277, 2019
- Ondicho, I., Choi, M., Choi, W.-M., (...), Hong, S.I., Park, N., "Experimental investigation and phase diagram of CoCrMnNi–Fe system bridging high-entropy alloys and high-alloyed steels", Journal of Alloys and Compounds, pp. 320-327, 2019
- Javadzadeh Kalahroudi, F., Koohdar, H., Jafarian, H.R., (...), Langdon, T.G., Nili-Ahmadabadi, M., "On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion", Materials Science and Engineering A, 749, pp. 27-34, 2019
- Derakhshan, J.F., Parsa, M.H., Jafarian, H.R., "Microstructure and mechanical properties variations of pure aluminum subjected to one pass of ECAP-Conform process", Materials Science and Engineering A, 747, pp. 120-129, 2019
- Mousavi Anijdan, S.H., Sabzi, M., Asadian, M., Jafarian, H.R., "Effect of sub-layer temperature during HFCVD process on morphology and corrosion behavior of tungsten carbide coating, International Journal of Applied Ceramic Technology16(1), pp. 243-253, 2019
- Oskouyi, O.E., Shahmiri, M., Maghsoudipour, A., Hasheminiasari, M., "Pulsed constant voltage electrophoretic deposition of YSZ electrolyte coating on conducting porous Ni–YSZ cermet for SOFCs applications", Journal of Alloys and Compounds, pp. 220-227, 2019
- Asefi, N., Masoudpanah, S.M., Hasheminiasari, M., "Photocatalytic performances of BiFeO 3 powders synthesized by solution combustion method: The role of mixed fuels", Materials Chemistry and Physics, 228, pp. 168-174, 2019
- Heidari Bagherabadi, M., Naghizadeh, R., Rezaie, H.R., Fallah Vostakola, M., "The effects of aluminum and aluminum borate addition on the properties of MgO-C refractories", Journal of the Australian Ceramic Society, 55(1), pp. 281-288, 2019
- Mohammadzadeh, H., Rezaie, H., Barati, M., Yu, D., Samim, H.R., "Kinetics of nonisothermal reduction and carburization of WO 3 ─NiO nano-composite powders by CO─CO", International Journal of Chemical Kinetics, 2019
- Torab Ahmadi, P., Eftekhari Yekta, B., Mohammadi, H., Golestani-Fard, F., "Thermal and crystallization behavior of SiO 2 -PbF 2 glass system in the presence of ErF 3 and Al 2 O 3", Journal of the American Ceramic Society, 102(6), pp. 3411-3425, 2019
- Fallah Vostakola, M., Mirkazemi, S.M., Eftekhari Yekta, B., "Structural, morphological, and optical properties of W-doped VO 2 thin films prepared by sol-gel spin coating method", International Journal of Applied Ceramic Technology,16(3), pp. 943-950, 2019
- Hosseinzadeh, F., Sarpoolaky, H., "Sol–Gel Synthesis of Mesoporous Alumina Considering the Simultaneous Effects of Preparation Parameters by Response Surface Methodology", Journal of Inorganic and Organometallic Polymers and Materials , 2019
- Hosseinzadeh, F., Sarpoolaky, H., "Optimization of mesoporous alumina sol-gel synthesis by Taguchi and response surface methodology", International Journal of Applied Ceramic Technology, 2019
- Parsi, A., Golestani-Fard, F., Mirkazemi, S.M., "The effect of gelcasting parameters on microstructural optimization of porous Si 3 N 4 ceramics", Ceramics International, 45(8), pp. 9719-9725, 2019
- H. Ghanbari, M.A. Shafikhani., M. Daryalaal,"Graphene nanosheets production using liquid-phase exfoliation of premilled graphite in dimethylformamide and structural defects evaluation", Ceramics International, 2019.
- M. Jalili, H.Ghanbari, S. Moemen Bellah, R. Malekfar,"High-quality liquid phase-pulsed laser ablation graphene synthesis by flexible graphite exfoliation", Journal of Materials Science & Technology, 2019. 35(3): p. 292-299.
- H. B. M. Emrooz, M. Maleki, M. Shokouhimehr, Excellent adsorption of orange acid II on a water fern– derived micro- and mesoporous carbon , Journal of the Taiwan Institute of Chemical Engineers 109 (2019) 99–109.
- M. Maleki, P. T. Ahmadi, H. Mohammadi, H. Karimian, R. Ahmadi, H. B. M. Emrooz, Photo-thermal conversion structure by infiltration of paraffin in three dimensionally interconnected porous polystyrene-carbon nanotubes (PS-CNT) polyHIPE foam, Solar Energy Materials and Solar Cells 191, (2019), 266-274.
- Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Quantitative Assessment of Dynamic Recovery Kinetics in Sn-5Sb Lead-Free Solder Alloy During Hot Working", Journal of Electronic Materials47(11), pp. 6868-6877, 2018
- Pourgolmohammad, B., Masoudpanah, S.M., Aboutalebi, M.R., "Cation distribution tuning of solution combusted CoFe2O4powders", Iranian Journal of Materials Science and Engineering, Volume 15, Issue 2, June 2018, Pages 67-75
- Vasei, H.V., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Solution combustion synthesis of ZnO powders using CTAB as fuel", Ceramics International, Volume 44, Issue 7, May 2018, Pages 7741-7745
- Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "An investigation of workability and flow instability of Sn-5Sb lead free solder alloy during hot deformation", Materials Science and Engineering A, Volume 718, 7 March 2018, Pages 87-95
- Aboutalebi, M., Bijarchi, M.A., Shafii, M.B., Kazemzadeh Hannani, S., "Numerical investigation on splitting of ferrofluid microdroplets in T-junctions using an asymmetric magnetic field with proposed correlation", Journal of Magnetism and Magnetic Materials, Volume 447, 1 February 2018, Pages 139-149
- S. Famenin Nezhad Hamedani, S. M. Masoudpanah, M. Sh. Bafghi, N. Asgharinezhad Baloochi, "Solution combustion synthesis of CoFe2O4 powders using mixture of CTAB and glycine fuels", Jorunal of Sol-Gel Science and Technology, 2018, 86, 743-750
- Ardebilchi Marand, N., Masoudpanah, S.M., Bafghi, M.S, "Solution combustion synthesis of nickel sulfide composite powders", Ceramics International, 44(14), pp. 17277-17282.
- Jajarmi, E., Soltanieh, M., Nasiri, H. , "Using aluminothermic reduction of nickel oxide in formation of AlNi intermetallic compound", Mineral Processing and Extractive Metallurgy: Transactions of the Institute of Mining and Metallurgy127(4), pp. 236-241 , 2018
- Taherkhani, K., Soltanieh, M., "Composite coatings created by new method of active screen plasma nitriding on aluminium alloy 6061", Journal of Alloys and Compounds, Volume 741, 15 April 2018, Pages 1247-1257
- Ranjbar-Nouri, Z., Soltanieh, M., Rastegari, S., "Applying the protective CuMn2O4 spinel coating on AISI-430 ferritic stainless steel used as solid oxide fuel cell interconnects", Surface and Coatings Technology, Volume 334, 25 January 2018, Pages 365-372
- Mirghasemi, S.M., Eivani, A.R., Seyedein, S.H., Jafarian, H.R., "A comparison between routine vs. normalized Cockroft-Latham fracture criteria for prediction of fracture during equal channel angular pressing", Engineering Fracture Mechanics199, pp. 721-729 , 2018
- Nikbakht, R., Seyedein, S.H., Kheirandish, S., Assadi, H., Jodoin, B., "Asymmetrical bonding in cold spraying of dissimilar materials", Applied Surface Science, Volume 444, 30 June 2018, Pages 621-632
- Rezaei, M.R., Shabestari, S.G., Razavi, S.H. , "Effect of ECAP consolidation process on the interfacial characteristics of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Composite Interfaces, 25(8), pp. 669-679 , 2018
- Khodabakhshi, A., Mashreghi, A., Shajari, Y., Razavi, S.H., "Investigation of Microstructure Properties and Quantitative Metallography by Different Etchants in the Service-Exposed Nickel-Based Superalloy Turbine Blade", Transactions of the Indian Institute of Metals, 71(4), pp. 849-859, 2018
- Seifollahi, M., Sahrapour, P., Abbasi, S.M., Kheirandish, S., Razavi, S.H., "Mathematical-Thermodynamic Prediction and Kinetics of Eta Phase Formation in Fe–Ni-Based Superalloys", Transactions of the Indian Institute of Metals, 71(1), pp. 147-152, 2018
- Ataie, S.A., Zakeri, A., RSM optimization of pulse electrodeposition of Zn-Ni-Al2O3 nanocomposites under ultrasound irradiation, Surface & Coating Technology, 359, 206-215. doi:10.1016/j.surfcoat.2018.12.063
- Asadrokht, M., Zakeri, A. Effect of concurrent ball milling on cementation reactions: The case of Cu-Al system, Minerals Engineering, 125, 15-25. doi: 10.1016/j.mineng.2018.05.024
- Rahimi-Vahedi, A., Adeli, M., Saghafian, H., "Formation of Fe-TiC composite clad layers on steel using the combustion synthesis process", Surface and Coatings Technology, 347, pp. 217-224 , 2018
- Structural and magnetic properties of Mn0.8Zn0.2Fe2O4/PVA composites, Naserifar, M., Masoudpanah, S.M., Alamolhoda, S., Journal of Magnetism and Magnetic Materials, Volume 458, 15 July 2018, Pages 80-84
- Magnetic and microwave absorption properties of SrZnCoFe16O27 powders synthesized by solution combustion method, Azizi, P., Masoudpanah, S.M., Alamolhoda, S., Journal of Alloys and Compounds, Volume 739, 30 March 2018, Pages 211-217
- Solution Combustion Synthesis of Ni/NiO/ZnO Nanocomposites for Photodegradation of Methylene Blue Under Ultraviolet Irradiation, Biglari, Z., Masoudpanah, S.M., Alamolhoda, S, Journal of Electronic Materials13 February 2018, Pages 1-7
- Cetyltrimethylammonium Bromide (CTAB) Surfactant-Assisted Synthesis of BiFeO3 Nanoparticles by Sol-Gel Auto-Combustion Method, Ahmadi, P., Alamolhoda, S., Mirkazemi, S.M., Journal of Superconductivity and Novel Magnetism, 15 February 2018, Pages 1-8
- S.A. Seyyed Ebrahimi, A. Pirouzfar, S.M. Masoudpanah, "Effect of Zn substitution on the structural and magnetic properties of densely packed Co1−xZnxFe2O4 Nanowires", Iranian Journal of Science Technology, Transactions A: Science, 42 (2018) 1247-1251.
- Z. Kalantari Bolaghi, S. M. Masoudpanah, M. Hasheminiasari, "Photocatalytic properties of ZnO powders synthesized by conventional and microwave-assisted solution combustion method", Journal of Sol-Gel Science and Technology 86 (2018):711–718
- Ghasemi, A., Hasheminiasari, Masoudpanah, S.M., Safizade, B., "Enhanced Photocatalytic Activity of Two-Pot-Synthesized BiFeO3–ZnFe2O4 Heterojunction Nanocomposite", Journal of Electronic Materials, Volume 47, Issue 4, 1 April 2018, Pages 2225-2229
- Kheradmand, A., Vahidi, O., Masoudpanah, S.M., "Magnetic, hyperthermic and structural properties of zn substituted CaFe2O4 powders", Applied Physics A: Materials Science and Processing, Volume 124, Issue 3, 1 March 2018, Article number 255
- Hemmati, A.R., Soltanieh, S.M., Masoudpanah, S.M., "On the Interaction Between Erosion and Corrosion in Chromium Carbide Coating", Journal of Bio- and Tribo-CorrosionVolume 4, Issue 1, 1 March 2018, Article number 10
- Safizade, B., Masoudpanah, S.M., Hasheminiasari, M., Ghasemi, A., "Photocatalytic activity of BiFeO3/ZnFe2O4 nanocomposites under visible light irradiation", RSC Advances, Volume 8,Issue 13, 2018, Pages 6988-6995
- S.R. Saeedi Afshar, M. Hasheminiasari, S.M. Masoudpanah, "Structural, magnetic and microwave absorption properties of SrFe12O19/Ni0.6Zn0.4Fe2O4 composites prepared by one-pot solution combustion method", Journal of Magnetism and Magnetic Materials 466 (2018) 1–6
- Z. Kalantari Bolaghi, M. Hasheminiasari, S.M. Masoudpanah, "Solution combustion synthesis of ZnO powders using mixture of fuels in closed system", Ceramics International 44 (2018) 12684–12690
- MOHAMMADI RAHVARD, M., TAMIZIFAR, M., Ali BOUTORABI, S.M., "Zr-Co(Cu)-Al bulk metallic glasses with optimal glass-forming ability and their compressive properties", Transactions of Nonferrous Metals Society of China (English Edition), 28(8), pp. 1543-1552, 2018
- Jafari, A., Khorram, A., Boutorabi, S.M.A., "Microstructure Evolution of MAR-M302 Superalloy During Heat Treatment at High Temperatures", Transactions of the Indian Institute of Metals, Volume 71, Issue 3, 1 March 2018, Pages 685-695
- Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "Non-isothermal crystallization kinetics and fragility of Zr56 Co28 Al16 and Zr56 Co22 Cu6 Al16 bulk metallic glasses", Journal of Thermal Analysis and Calorimetrypp. 1-12, 2018
- Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "Enhanced plasticity of Zr56Co24Ag4Al16 and Zr56Co22Cu6Al16 bulk metallic glasses by controlling the casting temperature", Journal of Non-Crystalline Solids, Volume 491, 1 July 2018, Pages 114-123
- Mohammadi Rahvard, M., Tamizifar, M., Boutorabi, S.M.A., "The effect of Ag addition on the non-isothermal crystallization kinetics and fragility of Zr56Co28Al16 bulk metallic glass", Journal of Non-Crystalline Solids, Volume 481, 1 February 2018, Pages 74-84
- Yousefieh, M., Tamizifar, M., Boutorabi, S.M.A., Borhani, E., "An investigation on the microstructure, texture and mechanical properties of an optimized friction stir-welded ultrafine-grained Al–0.2 wt% Sc alloy deformed by accumulative roll bonding", Journal of Materials Science, Volume 53, Issue 6, 1 March 2018, Pages 4623-4634
- Yousefi, A., Eivani, A.R., Boutorabi, S.M.A., Jafarian, H.R., "Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063", Materials Science and Engineering A, Volume 713, 24 January 2018, Pages 180-189
- Sedighi, O., Shabestari, S.G., Yavari, F., "Investigation on the effect of Sn on solidification and microstructure of AZ91 magnesium alloy using cooling curve thermal analysis", Thermochimica Acta, 667, pp. 165-172, 2018
- F. Yavari, S.G. Shabestari, “Assessment of the Effect of Cooling Rate on Dendrite Coherency Point and Hot Tearing Susceptibility of AZ Magnesium Alloys Using Thermal Analysis”, International Journal of Cast Metals Research, 2018, PP. 1-10
- GHONCHEH, M.H., SHABESTARI, S.G., ASGARI, A., KARIMZADEH, M., "Nonmechanical criteria proposed for prediction of hot tearing sensitivity in 2024 aluminum alloy", Transactions of Nonferrous Metals Society of China (English Edition), 28(5), pp. 848-857, 2018
- Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation process on the interfacial characteristics of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Composite Interfaces, Volume 25, Issue 8, 3 August 2018, Pages 669-679
- M. Shakouri, M. Esmailian, S.G. Shabestari, “Effect of Silver Addition on Mechanical Properties and Stress Corrosion Cracking in a Pre-deformed and Overaged 7055 Aluminum Alloy”, Journal of Testing and Evaluation, ASTM, Sept. 2018, Vol. 46, No. 5, PP. 1891-1900
- Esmaeilzadeh, M., Arabi, H., Qods, F., Sadeghi, B.M., "Prediction of texture evolution and crack growth rate of nickel based superalloys in thermo-mechanical fatigue by ultrasonic technique", Theoretical and Applied Fracture Mechanics, 97, pp. 15-29, 2018
- Howeyze, M., Eivani, A.R., Arabi, H., Jafarian, H.R., "Effects of deformation routes on the evolution of microstructure, texture and tensile properties of AA5052 aluminum alloy", Materials Science and Engineering A, 732, pp. 120-128, 2018
- M. Howeyze, H. Arabi, A.R. Eivani , H.R. Jafarian, "Strengthening of AA5052 aluminum alloy by equal channel angular pressing followed by softening at room temperature", Materials Science and Engineering, Volume 720, 21 March 2018, Pages 160-168
- N. Abbasnezhada,b, A. Khavandi, J. Fitoussia, H. Arabi, M. Shirinbayana, A. Tcharkhtchiaو "Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK)", International Journal of Fatigue 109 (2018) 83–92
- Niloofar Navaei Lavasania, Hamid Reza Jafariana,⁎, Hossein Arabia, N. Parkb, "Texture analysis and development of ultrafine grained structure during thermo-mechanical treatment in a gamma-TiAl intermetallic", materials Science & Engineering A 711 (2018) 259–267
- Tehrani-Moghadam, H.G., Jafarian, H.R., Salehi, M.T., Eivani, A.R., "Evolution of microstructure and mechanical properties of Fe-24Ni-0.3C TRIP steel during friction stir processing", Materials Science and Engineering A, Volume 718, 7 March 2018, Pages 335-344
- Kamali, S., Shemshad, S., Khavandi, A., Azari, S., "Construction novel hydroxyapatite-nitinol nanocomposite for hard tissue applications", Materials Chemistry and Physics, 220, pp. 331-341, 2018
- Amini, M., Khavandi, A., "Evaluation of the electrical properties and mechanical behavior of insulator's composite core in harsh environments", Materials Research Express, 5(11),115306, 2018
- Daryan, S.H., Javadpour, J., Khavandi, A., Erfan, M., "Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP", Ceramics International, 44(16), pp. 19743-19750, 2018
- Kazemi Darabadi, B., Khavandi, A., Ouria, A., Rasouli, R., "Evaluation of the compactness of subbase and base geomaterials by using stiffness, Sadhana - Academy Proceedings in Engineering Sciences43(12),195, 2018
- Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Evaluation of setting time and compressive strength of a new bone cement precursor powder containing Mg–Na–Ca", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(10), pp. 1017-1024, 2018
- Shemshad, S., Kamali, S., Khavandi, A., Azari, S., "Synthesis, characterization and in-vitro behavior of natural chitosan-hydroxyapatite-diopside nanocomposite scaffold for bone tissue engineering", International Journal of Polymeric Materials and Polymeric Biomaterials, pp. 1-10, 2018
- M. H. Zamani, M. Divandari *, M. Tamizifar "On the Characteristics of Friction Stir Welding lap Joint of Magnesium and Aluminum" Iranian Journal of Materials Science and Engineering, Vol. 15, Number 1, 2018, DOI: 10.22068/ijmse.15.1.8
- Mohammadi, M., Javid, A.A.S., Divandari, M., "Introducing a method to determine nonautoclaved aerated concrete air content based on packing theory", Journal of Materials in Civil Engineering, 30(3),04017312, 2018
- Morteza Gholami, Mehdi Divandari, "Interfacial Phases and Defects Characteristics of Al/Cu-Zn Bimetal Produced via Centrifugal Casting Process " Iranian Journal of Materials Science and Engineering" Volume 15, 2018
- Mohammadi, Mohsen; Shirzadi Javid, Ali Akbar and Divandari Mehdi, “Packing theory application to determine non-autoclaved aerated concrete (NAAC) air pores content”, Journal of Materials in Civil Engineering Volume 30 Issue 3 - March 2018
- Sharif, B., Saghafian, H., Razavi, S.H., "Modification of primary si crystals and fe-rich intermetallics in LM28 al alloy fabricated through thixoforming", Iranian Journal of Materials Science and Engineering, 15(2), pp. 32-47, 2018
- Abbaszadeh, P., Kheirandish, S., Saghafian, H., Goodarzy, M.H., "Effect of austenitizing temperature on mechanical properties of the mixed bainite - Martensite microstructure in CrMoV steel", Materials Research, 21(1),e20170469, 2018
- Nouri, A., Kheirandish, S., Saghafian, H., "A Study of Redistribution of Silicon in Dual-Phase Silicon Steels", Metal Science and Heat Treatment, 2018
- S Najafi, AR Eivani, M Samaee, HR Jafarian, J Zhou, A comprehensive investigation of the strengthening effects of dislocations, texture and low and high angle grain boundaries in ultrafine grained AA6063 aluminum alloy, Materials Characterization (2018) 136, 60-68.
- Farhad Rahimi, Bagher Mohammad Sadeghi, Masoud Ahmadi, "Finite element analysis of the deformation behaviour of pure aluminium in repetitive corrugation-straightening and constrained groove pressing", International Journal of Manufacturing Technology and Management, Volume 32, Issue 6, 2018
- Hashemipour, S., Eivani, A.R., Jafarian, H.R., Naseri, M., Park, N., "Microstructure and mechanical properties development of nano/ultrafine grained AISI 316L austenitic stainless steel prepared by repetitive corrugation and straightening by rolling (RCSR)", Materials Research Express5(12),126519, 2018
- Mousavi Anijdan, S.H., Jafarian, H.R., Park, N., "The effect of severe plastic deformation and annealing conditions on mechanical properties and restoration phenomena in an ultrafine-grains Fe-28.5%Ni steel", Philosophical Magazine, 98(27), pp. 2457-2480, 2018
- Zangeneh Najafi, S., Momeni, A., Jafarian, H.R., "Flow curves and microstructure of K107 tool steel subjected to compression tests at elevated temperatures", Materials Science and Engineering A, 732, pp. 78-90, 2018
- Anijdan, S.H.M., Aghaie-Khafri, M., Jafarian, H.R., Khoshakhlagh, A.R., "Role of cube texture on toughness variation of electric resistance welded steel", Science and Technology of Welding and Joining, 23(5), pp. 387-393, 2018
- Najafi, S., Eivani, A.R., Samaee, M., Jafarian, H.R., Zhou, J., "A comprehensive investigation of the strengthening effects of dislocations, texture and low and high angle grain boundaries in ultrafine grained AA6063 aluminum alloy", Materials Characterization, 2018
- Derakhshan, J.F., Parsa, M.H., Ayati, V., Jafarian, H., "Estimation of dislocations density and distribution of dislocations during ECAP-Conform process", AIP Conference Proceedings, 2018
- Kalahroudi, F.J., Koohdar, H., Jafarian, H., (...), Huang, Y., Langdon, T.G., "Effect of high-pressure torsion on the microstructural evolution and mechanical properties of an Fe-10Ni-7Mn (wt. %) lath martensitic steel", AIP Conference Proceedings, 2018
- Saeedi Afshar, S.R., Hasheminiasari, M., Masoudpanah, S.M., "Structural, magnetic and microwave absorption properties of SrFe12 O19 /Ni0.6 Zn0.4 Fe2 O4 composites prepared by one-pot solution combustion method", Journal of Magnetism and Magnetic Materials, 466, pp. 1-6, 2018
- Salavat, M.K., Soltanieh, M., Hasheminiasari, M., "On the Erosion–Corrosion Behavior of Active Screen Plasma Nitrided St52 Steel", Surface Engineering and Applied Electrochemistry, 54(4), pp. 427-433, 2018
- Tavassoli, H., Javadpour, J., Taheri, M., (...), Ebrahimi Warkiani, M., Bonakdar, S., "Incorporation of Nanoalumina Improves Mechanical Properties and Osteogenesis of Hydroxyapatite Bioceramics", ACS Biomaterials Science and Engineering, 4(4), pp. 1324-1336, 2018
- Najafi, A., Golestani-Fard, F., Rezaie, H.R., "Sol-gel synthesis and characterization of B4 C nanopowder", Ceramics International, 44(17), pp. 21386-21394, 2018
- Dabiri, S.M.H., Rezaie, A.A., Moghimi, M., Rezaie, H., "Extraction of Hydroxyapatite from Fish Bones and Its Application in Nickel Adsorption", BioNanoScience, 8(3), pp. 823-834, 2018
- Baseri, J., Naghizadeh, R., Rezaie, H.R., Golestanifard, F., "Spark plasma effect on microstructure and mechanical properties of alumina-nickel-cobalt composite", Ceramica, 64(371), pp. 431-435, 2018
- Zabihi, M., Ayatollahi, M.R., Rezaie, H.R, "Mixed-mode fracture of synthesized nanocrystalline forsterite for biomedical applications", Theoretical and Applied Fracture Mechanics, 2018
- Bagherabadi, M.H., Naghizadeh, R., Rezaie, H.R., Vostakola, M.F., "Synthesis of dehydrated magnesium borate powders and the effect on the properties of MgO-C refractories", Journal of Ceramic Processing Research, 19(3), pp. 218-223, 2018
- Heidari, S., Hooshmand, T., Yekta, B.E., (...), Noshiri, N., Tahriri, M., "Effect of addition of titanium on structural, mechanical and biological properties of 45S5 glass-ceramic", Ceramics International, 44(10), pp. 11682-11692, 2018
- Maghouli, G., Eftekhari Yekta, B., "Effect of P2 O5 on crystallization behavior and chemical resistance of dental glasses in the Li2 O-SiO2 -ZrO2 system", Iranian Journal of Materials Science and Engineering, 15(1), pp. 17-23, 2018
- Marefati, M.T., Hadian, A.M., Hooshmand, T., Yekta, B.E., Koohkan, R., "Wettability of zirconia by feldspathic veneer in dental restorations: Effect of firing atmosphere and surface roughness", Ceramics International,44(4), pp. 4307-4312, 2018
- Nabbouh, M., Naghizadeh, R., Golestani-Fard, F., Sahili, J., "Effect of sintering profile on densification, microstructure and mechanical properties of Al2 O3 -3YSZ-Ni composite", Ceramics International, 44(14), pp. 17434-17439, 2018
- Shahjuee, T., Masoudpanah, S.M., Mirkazemi, S.M., "Thermal Decomposition Synthesis of MgFe2 O4 Nanoparticles for Magnetic Hyperthermia", Journal of Superconductivity and Novel Magnetism, 2018
- Khosravifar, M., Mirkazemi, S.M., Taheri, M., Golestanifard, F., "Effect of TiN Addition on 3Y-TZP Ceramics with Emphasis on Making EDM-Able Bodies", Journal of Materials Engineering and Performance, 2018
- Ahmadi, P., Alamolhoda, S., Mirkazemi, S.M., "Cetyltrimethylammonium Bromide (CTAB) Surfactant-Assisted Synthesis of BiFeO3Nanoparticles by Sol-Gel Auto-Combustion Method", Journal of Superconductivity and Novel Magnetism, 2018
- S. Angizi, A. Hatamie, H. Ghanbari,A. Simchi,"Mechanochemical Green Synthesis of Exfoliated Edge-Functionalized Boron Nitride Quantum Dots: Application to Vitamin C Sensing through Hybridization with Gold Electrodes", ACS Applied Materials & Interfaces, 2018. 10(34): p. 28819-28827
- M.R. Rahmani Taji Boyuk, S. Sovizi, H. Ghanbari, A. Simchi, N. Aboudzadeh,"Developing seedless growth of atomically thin semiconductor layers: Application to transition metal dichalcogenides", Ceramics International, 2018. 44(13): p. 15795-15803.
- H. B. M. Emrooz, M. Maleki, A. Rahmani, Azolla-derived Hierarchical Nanoporous Carbons: From Environmental Concerns to Industrial Opportunities, Journal of the Taiwan Institute of Chemical Engineers 91 (2018) 281–29.
- Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R., "Effects of the fuel type and fuel content on the specific surface area and magnetic properties of solution combusted CoFe2O4 nanoparticles", Ceramics International, February 06, 2017
- Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R. , Eivani, A.R., "Application of constitutive description and integrated ANFIS – ICA analysis to predict hot deformation behavior of Sn-5Sb lead-free solder alloy", Journal of Alloys and Compounds, Volume 697, 15 March 2017, Pages 287-299
- Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R., "Synthesis of CoFe2O4 powders with high surface area by solution combustion method: Effect of fuel content and cobalt precursor", Ceramics International, Volume 43, Issue 4, 1 March 2017, Pages 3797-3803
- Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R, "Effect of starting solution acidity on the characteristics of CoFe2O4 powders prepared by solution combustion synthesis", Journal of Magnetism and Magnetic Materials, Volume 424, 15 February 2017, Pages 352-358
- Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Incorporating the Johnson–Cook Constitutive Model and a Soft Computational Approach for Predicting the High-Temperature Flow Behavior of Sn-5Sb Solder Alloy: A Comparative Study for Processing Map Development", Journal of Electronic Materials, Volume 46, Issue 1, 1 January 2017, Pages 467-477
- Adeli, M., Seyedein, S.H., Aboutalebi, M.R., Kobashi, M., Kanetake, N., "Implementation of DSC analysis in reaction kinetics during heating of Ti–50 at.%Al powder mixture", Journal of Thermal Analysis and Calorimetry, Volume 128, Issue 2, 1 May 2017, Pages 867-874
- Behnami, A.K., Hoseinpur, A., Sakaki, M., Bafghi, M.S., Yanagisawa, K., "Synthesis of WC powder through microwave heating of WO3–C mixture", International Journal of Minerals, Metallurgy and Materials, Volume 24, Issue 2, 1 February 2017, Pages 202-20
- BEHNAMI, A.K., SAKAKI, M., BAFGHI, M.S., YANAGISAWA, K, "Facile microwave-assisted fabrication of WC-Al2O3composite powder from WO3-Al-C mixture", Transactions of Nonferrous Metals Society of China (English Edition), 2017
- Ghadi, A., Saghafian, H., Soltanieh, M., Yang, Z.-G., "Diffusion mechanism in molten salt baths during the production of carbide coatings via thermal reactive diffusion", International Journal of Minerals, Metallurgy and Materials, Volume 24, Issue 12, 1 December 2017, Pages 1448-1458
- Ghadi, A. ,Soltanieh, M. ,Saghafian, H. ,Yang, Z.G., , "Growth kinetics and microstructure of composite coatings on H13 by thermal reactive diffusion", Surface and Coatings Technology, Volume 325, 25 September 2017, Pages 318-326
- Jajarmi, E., Soltanieh, M., Nasiri, H., "Using aluminothermic reduction of nickel oxide in formation of AlNi intermetallic compound", Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 21 September 2017, Pages 1-6
- Hemmati, A.R., Soltanieh, M., Masoudpanah, S.M, "Effect of flow velocity and impact angle on erosion-corrosion behavior of chromium carbide coating", Journal of Tribology, Volume 139, Issue 3, May 2017, Article number 031303
- Salavat, M.K.,Soltanieh, M., Hasheminiasari, M., "Diffusion layer growth mechanism in ASPN method using an iron cage for St52 steel", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 2, 2017, Pages 24-31
- Aghajani, H., Torshizi, M., Soltanieh, M., "A new model for growth mechanism of nitride layers in plasma nitriding of AISI H11 hot work tool steel", VacuumVolume 141, 1 July 2017, Pages 97-102
- Abarghooei, H., Arabi, H., Seyedein, S.H., Mirzakhani, B., "Modeling of steady state hot flow behavior of API-X70 microalloyed steel using genetic algorithm and design of experiments", Applied Soft Computing Journal, Volume 52, 1 March 2017, Pages 471-477
- Faraji, A.H., Moradi, M., Goodarzi, M., Colucci, P., Maletta, C., "An investigation on capability of hybrid Nd:YAG laser-TIG welding technology for AA2198 Al-Li alloy", Optics and Lasers in Engineering, 2017
- Bayat Tork, N., Razavi, S.H., Saghafian, H., Mahmudi, R., "Strain-rate sensitivity of Mg–Gd alloys after extrusion and simple shear extrusion", Materials Science and Technology (United Kingdom)12 September 2017, Pages 1-9
- Nikoogoftar, N., Razavi, S.H., Ghanbari, M., "Effect of short heat treatment routes on the tribological properties of Ii-6a1-4v alloy", Iranian Journal of Materials Science and EngineeringVolume 14, Issue 3, September 2017, Pages 21-33
- Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation temperature on the microstructure and mechanical properties of Al-Cu-Ti metallic glass reinforced aluminum matrix composite",Journal of Materials Science and Technology, Volume 33, Issue 9, September 2017, Pages 1031-1038
- Seifollahi, M., Sahrapour, P., Abbasi, S.M., Kheirandish, S., Razavi, S.H., "Mathematical-Thermodynamic Prediction and Kinetics of Eta Phase Formation in Fe–Ni-Based Superalloys", Transactions of the Indian Institute of Metals19 May 2017, Pages 1-6
- Microwave-assisted solution combustion synthesis of Fe3O4 powders, M. Radpour, S.M. Masoudpanah⁎, S. Alamolhoda, Ceramics International, July, 2017.
- Effects of pH value on the microstructure and magnetic properties of solution combusted Fe3O4 powders, M. Radpour, S. Alamolhoda, S.M. Masoudpanah, Ceramics International, July, 2017.
- Phase Formation, Microstructure and Magnetic Properties of BiFeO3 Synthesized by Sol-Gel Auto Combustion Method Using Different Solvents, P. Ahmadi, S. Alamolhoda* and S. M. Mirkazemi, Int. J. Nanosci. Nanotechnol., Vol. 13, No. 3, Sept. 2017, pp. 195-201.
- Effect of fuel type on the microstructure and magnetic properties of solution combusted Fe3O4 powder, Fathi, H., Masoudpanah, S.M., Alamolhoda, S., Parnianfar, H., Ceramics International, 43 (2017) 7448-7453.
- Mixture of fuels for solution combustion synthesis of porous Fe3O4 powders,H. Parnianfar, S.M. Masoudpanah, S. Alamolhoda, H. Fathi, Journal of Magnetism and Magnetic Materials 432 (2017) 24–29.
- Hasheminiasari, M., Masoudpanah, S.M., Mirkazemi, S.M., Bayat, F., "Structural and magnetic properties of ZnFe2-xInxO4 nanoparticles synthesized by solution combustion method", Journal of Magnetism and Magnetic Materials, Volume 442, 15 November 2017, Pages 468-473
- Akbari, S., Masoudpanah, S.M. , Mirkazemi, S.M., Aliyan, N., "PVA assisted coprecipitation synthesis and characterization of MgFe2O4 nanoparticles", Ceramics International, Volume 43, Issue 8, 1 June 2017, Pages 6263-6267
- Masoudpanah, S.M. , Mirkazemi, S.M., Bagheriyeh, R., Jabbari, F., Bayat, F., "Structural, magnetic and photocatalytic characterization of Bi1-xLaxFeO3 nanoparticles synthesized by thermal decomposition method", Bulletin of Materials Science, Volume 40, Issue 1, February 2017, Pages 93-100
- Aliyan, N., Mirkazemi, S.M., Masoudpanah, S.M., Akbari, S., "The effect of post-calcination on cation distributions and magnetic properties of the coprecipitated MgFe2O4 nanoparticles", Applied Physics A: Materials Science and Processing, Volume 123, Issue 6, 1 June 2017, Article number 446
- Seyyed Ebrahim, S.A., Ebrahimi, M., Masoudpanah, S.M., "Comparative magnetic and photocatalytic properties of coprecipitated zinc ferrite nanoparticles before and after calcination", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 24-30
- Naeimi, M., Eivani, A.R. , Jafarian, H.R., Boutorabi, S.M.A., Shams, H, "Correlation between microstructure, tensile properties and fatigue life of AA1050 aluminum alloy processed by pure shear extrusion", Materials Science and Engineering A, Volume 679, 2 January 2017, Pages 292-298
- Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods", Journal of Alloys and Compounds, Volume 723, 5 November 2017, Pages 633-641
- Ghoncheh, M.H. ,Shabestari, S.G., "Erratum to: Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy", Metallurgical and Materials Transactions A, (2015), 46, 3, (1287-1299), 10.1007/s11661-014-2697-z), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 48, Issue 10, 1 October 2017, Page 5165
- Shabestari, S.G., Divandari, M., Ghoncheh, M.H. ,Jamali, V., "Interplay among Coating Thickness, Strip Size, and Thermal and Solidification Characteristics in A356 Lost Foam Casting Alloy", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Volume 48, Issue 5, 1 October 2017, Pages 2304-2315
- Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, Volume 60, Issue 5, 3 September 2017, Pages 888-901
- Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation temperature on the microstructure and mechanical properties of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Journal of Materials Science and Technology, Volume 33, Issue 9, September 2017, Pages 1031-1038
- Momeni, H.Shabestari, S.G., Razavi, H., "Rheology of Al-Cu-Mg pre-alloyed powder in supersolidus liquid phase sintering process", Canadian Metallurgical Quarterly, 10 August 2017, Pages 1-8
- Yavari, F., Shabestari, S.G, "Effect of cooling rate and Al content on solidification characteristics of AZ magnesium alloys using cooling curve thermal analysis", Journal of Thermal Analysis and CalorimetryVolume 129, Issue 2, 1 August 2017, Pages 655-662
- Esmaeilzadeh, M., Qods, F., Arabi, H., Sadeghi, B.M., "Evolution of the texture and microstructure in a nickel based superalloy during thermo-mechanical fatigue (TMF), using a modified integrated model and experimental results", International Journal of Fatigue, Volume 105, December 2017, Pages 191-207
- M. Esmaeilzadeh, F. Qods, H. Arabi, B.M. Sadeghi, "An investigation on crack growth rate of fatigue and induction heating thermo-mechanical fatigue (TMF) in Hastelloy X superalloy via LEFM, EPFM and integration models", International Journal of Fatigue 97 (2017) 135–149
- Ahmadi, M., Mohammad Sadeghi, B., Arabi, H., "Experimental and numerical investigation of V-bent anisotropic 304L SS sheet with spring-forward considering deformation-induced martensitic transformation", Materials and Design, Volume 123, 5 June 2017, Pages 211-222
- Abarghooei, H., Arabi, H., Seyedein, S.H., Mirzakhani, B., "Modeling of steady state hot flow behavior of API-X70 microalloyed steel using genetic algorithm and design of experiments", Applied Soft Computing Journal, Volume 52, 1 March 2017, Pages 471-477
- Alihemmati, Z., Vahidi, B., Haghighipour, N., Salehi, M., "Computational simulation of static/cyclic cell stimulations to investigate mechanical modulation of an individual mesenchymal stem cell using confocal microscopy", Materials Science and Engineering C, Volume 70, 1 January 2017, Pages 494-504
- Bazli, L., Eftekhari Yekta, B., Khavandi, A., "Preparation and Characterization of Sn-Containing Glasses for Brachytherapy Applications", Transactions of the Indian Ceramic Society, Volume 76, Issue 4, 2 October 2017, Pages 242-246
- Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Solubility controlling of the precursor powders of magnesium phosphate cement by changing the powder composition", Advances in Applied Ceramics, Volume 116, Issue 5, 4 July 2017, Pages 286-292
- Bayat, O., Khavandi, A.R., Ghasemzadeh, R., "Synthesis of TiCr2 intermetallic compound from mechanically activated starting powders via calcio-thermic co-reduction", Physics of Metals and Metallography, Volume 118, Issue 5, 1 May 2017, Pages 444-451
- Bazli, L., Khavandi, A., Boutorabi, M.A., Karrabi, M., "Correlation between viscoelastic behavior and morphology of nanocomposites based on SR/EPDM blends compatibilized by maleic anhydride", Polymer (United Kingdom), Volume 113, 24 March 2017, Pages 156-166
- M. Divandari, M. Mehrabin "A Comparative Study on Characteristics of Dynamic Oxide Film of Molten Zn-Al Alloys" Iranian Journal of Materials Science and Engineering, Vol. 14, Number 3, 2017, pp 34-47. DOI: 10.22068/ijmse.14.3.34
- Momeni, M., Saghafian, H., Golestani-Fard, F., Barati, N., Khanahmadi, A., "Effect of SiO2 addition on photocatalytic activity, water contact angle and mechanical stability of visible light activated TiO2 thin films applied on stainless steel by a sol gel method", Applied Surface ScienceVolume 392, 15 January 2017, Pages 80-87
- Kebriyaei, A., Mirdamadi, S.S., Saghafian, H., "Effect of heat treatment on the mechanical and tribological properties of AA8090/6% SiCp composite", Science and Engineering of Composite Materials, Volume 24, Issue 1, 1 January 2017, Pages 129-138
- Abazari, S., Rastegari, S., Kheirandish, S., "Influence of Pulse Electrodeposition and Heat Treatment on Microstructure, Tribological, and Corrosion Behavior of Nano-Grain Size Co-W Coatings", Journal of Materials Engineering and Performance, Volume 26, Issue 7, 1 July 2017, Pages 3133-3143
- Nikzad, S., Abdi, M., Rastegari, S., "Mechanism of Al-Si codeposition on In738LC through single-step diffusion process", International Journal of Surface Science and Engineering, Volume 11, Issue 1, 2017, Pages 1-11
- M Torabi, AR Eivani, H Jafarian, MT Salehi, Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing, Journal of Ultrafine Grained and Nanostructured Materials (2017) 50 (2), 90-97.
- H Mirzakouchakshirazi, AR Eivani, S Kheirandish, Effect of Post-Deformation Annealing Treatment on Interface Properties and Shear Bond Strength of Al-Cu Bimetallic Rods Produced by Equal Channel Angular Pressing, Iranian Journal of Materials Science & Engineering (2017) 14 (4).
- Eivani, A.R., Zhou, J., "Application of physical and numerical simulations for interpretation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy", Journal of Alloys and Compounds, Volume 725, 25 November 2017, Pages 41-53.
- Jafarian, H.R., Anijdan, S.H.M., Eivani, A.R., Park, N., "A comprehensive study of microstructure development and its corresponding tensile properties in nano/ultrafine-grained metastable austenitic steel during accumulative roll bonding (ARB)", Materials Science and Engineering A, Volume 703, 4 August 2017, Pages 196-204
- Eivani, A.R., Hosseini, M., Jafarian, H.R., Mousavi Anijdan, S.H., Park, N., "Microstructural evolution and fatigue properties of severely deformed AA1050 aluminum alloy", Materials Characterization, Volume 130, August 2017, Pages 204-210
- Dehnavi, M., Vafaeenezhad, H., Khakzadi, M., Nayebpashaee, N., Eivani, A.R., "Modelling and prediction impression creep behaviour of Al–Cu cast alloy", International Journal of Cast Metals Research, Volume 30, Issue 2, 4 March 2017, Pages 70-80
- Ashrafizadeh, S.M., Eivani, A.R., Jafarian, H.R., Zhou, J., Improvement of mechanical properties of AA6063 aluminum alloy after equal channel angular pressing by applying a two-stage solution treatment", Materials Science and Engineering A, Volume 687, 27 February 2017, Pages 54-62
- Tirekar, S., Jafarian, H.R. , Eivani, A.R., "Towards engineering of mechanical properties through stabilization of austenite in ultrafine grained martensite–austenite dual phase steel processed by accumulative roll bonding", Materials Science and Engineering A, Volume 684, 27 January 2017, Pages 120-126
- Rahimi, F., Eivani, A.R., Jafarian, H.R., Bhattacharjee, T., "Effect of pure shear strain on mechanical properties and microstructural evolution", Materials Science and Engineering A, Volume 679, 2 January 2017, Pages 133-142
- Fathi, H., Mohammadian Semnani, H.R., Emadoddin, E., Mohammad Sadeghi, B., "Effect of martensitic transformation on springback behavior of 304L austenitic stainless steel", Materials Research ExpressVolume 4, Issue 9, September 2017, Article number 096510
- Anijdan, S.H.M., Aghaie-Khafri, M., Jafarian, H.R., Khoshakhlagh, A.R., "Role of cube texture on toughness variation of electric resistance welded steel ", Science and Technology of Welding and Joining, 2017
- Koohdar, H., Nili-Ahmadabadi, M., Habibi-Parsa, M., Jafarian, H.R., Bhattacharjee, T., Tsuji, N., "On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 48, Issue 11, 1 November 2017, Pages 5244-5257
- Zangeneh Najafi, S., Momeni, A., Jafarian, H.R., Ghadar, S., "Recrystallization, precipitation and flow behavior of D3 tool steel under hot working condition", Materials Characterization, Volume 132, October 2017, Pages 437-447
- Parnian, P., Parsa, M.H., Mirzadeh, H., Jafarian, H.R., "Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire", Steel Research International, Volume 88, Issue 8, August 2017, Article number 1600423
- Mirab, S., Nili-Ahmadabadi, M., Khajezade, A., Jafarian, H.R., "Correlation between poly-modal grain size and peculiar mechanical properties of pure aluminum deformed by RCSR process", Materials Science and Engineering A, Volume 700, 17 July 2017, Pages 416-424
- Jafarian, H.R., Habibi-Livar, J., "Dependency of annealing behaviour on grain size in Al-TiC composite produced by accumulative roll bonding", Bulletin of Materials Science, Volume 40, Issue 3, June 2017, Pages 583-590
- Ashrafizadeh, S.M., Eivani, A.R., Jafarian, H.R., Zhou, J., "Improvement of mechanical properties of AA6063 aluminum alloy after equal channel angular pressing by applying a two-stage solution treatment", Materials Science and Engineering A, Volume 687, 27 February 2017, Pages 54-62
- Mousavi Anijdan, S.H., Jafarian, H.R., Bahrami, A., "Microstructural characteristics of nano-structured Fe-28.5Ni steel by means of severe plastic deformation", IOP Conference Series: Materials Science and Engineering, Volume 194, Issue 1, 8 May 2017, Article number 012051
- Zoeram, A.S., Anijdan, S.H.M., Jafarian, H.R., Bhattacharjee, T., "Welding parameters analysis and microstructural evolution of dissimilar joints in Al/Bronze processed by friction stir welding and their effect on engineering tensile behavior", Materials Science and Engineering A, Volume 687, 27 February 2017, Pages 288-297
- Jafarian, H.R., Tarazkouhi, M.F., "Significant enhancement of tensile properties through combination of severe plastic deformation and reverse transformation in an ultrafine/nano grain lath martensitic steel", Materials Science and Engineering A, Volume 686, 16 February 2017, Pages 113-120
- Moghimian, P., Khosravi, M.H., Najafi, A., Afshar, S., Javadpour, J., Samadani, M., "Erratum to “Effect of low temperature on formation mechanism of calcium phosphate nano powder via precipitation method”, Advanced Powder Technology, Volume 28, Issue 2, 1 February 2017, Page 686
- Baseri, J., Naghizadeh, Rezaie, H.R, "Preparation and mechanical properties of alumina/spinel/metal composite with three different sintering methods", Journal of Ceramic Processing Research, Volume 18, Issue 1, 2017, Pages 21-26
- Maskani, N., Naghizadeh, R., Mirhabibi, A., Rezaie, H., "Synthesis of Al2O3-ni composite powders by co-precipitation method", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 31-37
- Mohammadzadeh Valendar, H., Yu, D., Barati, M., Rezaie, H.R., "Isothermal kinetics of reduction and carburization of WO3–NiO nanocomposite powder by CO/CO2", Journal of Thermal Analysis and Calorimetry, Volume 128, Issue 1, 1 April 2017, Pages 553-566
- Mohaghegh, Eftekhari Yekta, B., Marghusian, V.K., Khosraviani, A., "Effect of solarization on mechanical properties of lithium silicate glass-ceramics", Journal of the Australian Ceramic Society, Volume 53, Issue 2, 1 October 2017, Pages 385-390
- Mohaghegh, E., Nemati, A., Eftekhari Yekta, B., Banijamali, S., "Effects of Fe2O3 content on ionic conductivity of Li2O-TiO2-P2O5 glasses and glass-ceramics", Materials Chemistry and Physics, Volume 190, 1 April 2017, Pages 8-16
- Vostakola, M.F., Yekta, B.E., Mirkazemi, S.M., "The Effects of Vanadium Pentoxide to Oxalic Acid Ratio and Different Atmospheres on the Formation of VO2 Nanopowders Synthesized via Sol–Gel Method", Journal of Electronic Materials,46(11), pp. 6689-6697, 2017
- Nabbouh, M.H., Naghizadeh, R., Golestani-Fard, F., Rezaie, H., "Processing and properties of Ni dispersed zirconia toughened alumina", Journal of Ceramic Processing Research, 2017
- Arani, H.F., Mirhabibi, A.R., Collins, S., Daroughegi, R., Khalife Soltani, A., Naghizadeh, R., Riahi-Noori, N., Aghababazadeh, R., Westwood, A., "Enhancement in graphitization of coal tar pitch by functionalized carbon nanotubes", RSC AdvancesVolume 7, Issue 9, 2017, Pages 5533-5540
- Behzad Abasht, Seyyed Mohammad Mirkazemi, Ali Beitollahi, "Solution combustion synthesis of Ca hexaferrite using glycine fuel", Volume 708, 25 June 2017, Pages 337–343
- Javadi, A.H., Mirdamadi, S., Shakhesi, S., "Process optimization and microstructural analysis of aluminum based composite reinforced by multi-walled carbon nanotubes with various aspect ratios", Materialwissenschaft und Werkstofftechnik, Volume 48, Issue 7, July 2017, Pages 719-725
- Kiani, F., Razzaghi, Z., Ghadiani, B., Tamizifar, M., Mohmmadi, M.H., Simchi, A., "Self-limited growth of large-area monolayer graphene films by low pressure chemical vapor deposition for graphene-based field effect transistors", Ceramics International, Volume 43, Issue 17, 1 December 2017, Pages 15010-15017
- Ataei, A., Jalaly, M., Tamizifar, M., "Surface hardening of tungsten-based heavy alloy via pack boronizing", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 58-68
- Barati, N., Yerokhin, A., Golestanifard, F., Rastegari, S., Meletis, E.I., "Alumina- zirconia coatings produced by Plasma Electrolytic Oxidation on Al alloy for corrosion resistance improvement", Journal of Alloys and Compounds, Volume 724, 2017, Pages 435-442
- Mahmoudiniya, M., Kheirandish, S., Asadiasadabad, M., "The Effect of Cold Rolling on Microstructure and Mechanical Properties of a New Cr–Mn Austenitic Stainless Steel in Comparison with AISI 316 Stainless Steel", Transactions of the Indian Institute of Metals, Volume 70, Issue 5, 1 July 2017, Pages 1251-1259
- Mirzakouchakshirazi, H., Eivani, A.R.,Kheirandish, S., "Effect of post-deformation annealing treatment on interface properties and shear bond strength of Al-Cu bimetallic rods produced by equal channel angular pressing", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 4, December 2017, Pages 25-34
- Seifollahi, M., Razavi, S.H., Kheirandish, S., Abbasi, S.M., "Effect of minor Zr addition on γ′ and η phase precipitation and tensile properties of A286 superalloy", Indian Journal of Engineering and Materials Sciences, Open Access Volume 24, Issue 2, April 2017, Pages 147-152
- Mahmoudiniya. M., Kheirandish, S., Asadi Asadabad, M., "High temperature tensile properties of new Fe-Cr-Mn developed steel", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 47-57
- Karimi, A., Kheirandish, S., Mahmoudiniya, M., "Effect of bainite volume fraction on mechanical properties of a ferrite-bainite-martensite steel", Kovove Materialy, Volume 55, Issue 3, 2017, Pages 175-182
- Mazinani, B., Beitollahi, A., Masrom, A.K., Samiee, L., Ahmadi, Z., "Synthesis and photocatalytic performance of hollow sphere particles of SiO2-TiO2 composite of mesocellular foam walls", Ceramics International, Volume 43, Issue 15, 15 October 2017, Pages 11786-11791
- Ghasemi, S., Farsangi, Z.J., Beitollahi, A., Mirkazemi, M., Rezayat, S.M., Sarkar, S., "Synthesis of hollow mesoporous silica (HMS) nanoparticles as a candidate for sulfasalazine drug loading", Ceramics International, Volume 43, Issue 14, 1 October 2017, Pages 11225-11232
- Mirtaheri, B., Shokouhimehr, M., Beitollahi, A., "Synthesis of mesoporous tungsten oxide by template-assisted sol–gel method and its photocatalytic degradation activity", Journal of Sol-Gel Science and Technology, Volume 82, Issue 1, 1 April 2017, Pages 148-156
|