|
|
دکتر حمیدرضا رضایی
رتبه علمی: استاد
سال تولد: 1336 هجری شمسی
محل تحصیل: انگلستان، دانشگاه شفیلد
آخرین مدرک تحصیلی: دکترا - مهندسی مواد و متالورژی
سال اخذ مدرک تحصیلی: 1377 هجری شمسی
تلفن تماس: 73228856
دورنگار: 77240480
پست الکترونیکی: hrezaieiust.ac.ir
google scholar: hamid reza Rezaie
|
- کارشناسی ارشد: مواد، دانشگاه علم و صنعت ایران، 1369
- کارشناسی: مواد و متالورژی، دانشگاه علم و صنعت ایران، 1364
زمینه‌های تدریس:
آزمایشگاه سراموگرافی، آزمایشگاه فرایند ساخت سرامیکها، کامپوزیت ها، روشهای پیشرفته شناخت و آنالیز مواد، روشهای پیشرفته مطالعه مواد، روشهای نوین شناسائی و آنالیز مواد، خواص فیزیکی سرامیکها، روشهای پیشرفته سنتز
زمینه تحقیقاتی مورد علاقه:
دیرگدازها-سرامیکهای سنتی (چینی و کاشی)-کامپوزیتهای سرامیکی
سوابق تدریس دانشگاهی:
|
نام درس تدریس شده
|
محل تدریس
|
سال شروع
|
سال پایان
|
| خواص فیزیکی سرامیکها |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1378 |
تاکنون
|
| روشهای شناخت و آنالیز مواد |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1378
|
تاکنون
|
| کامپوزیت |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1380
|
تاکنون
|
| روشهای پیشرفته سنتز |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1388
|
تاکنون
|
| آز سراموگرافی |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1378
|
تاکنون
|
| آز فرایند ساخت 2 |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1378
|
تاکنون
|
| آز روش شناخت و آنالیز مواد |
دانشکده مواد و متالورژی، دانشگاه علم و صنعت ایران
|
1387
|
تاکنون
|
|
مقالات چاپ شده در مجلات علمی – لاتین
|
| Shabani, S., Mirkazemi, S.M., Rezaie, H., Vahidshad, Y., Trasatti, S., "A comparative study on the thermal stability, textural, and structural properties of mesostructured γ-Al2O3 granules in the presence of La, Sn, and B additives", Ceramics Internationalthis link is disabled, 2022, 48(5), pp. 6638–6648 |
| Zakeri, N., Rezaie, H.R., Javadpour, J., Kharaziha, M., "Cisplatin loaded polycaprolactone – Zeolite nanocomposite scaffolds for bone cancer treatment", Journal of Science: Advanced Materials and Devicesthis link is disabled, 2022, 7(1), 100377 |
| KashaniNia, F., Rezaie, H.R., Sarpoolaky, H., "Increasing the clay membranes’ Cr3+ Ions removal ability by coating a bentonite-CMC composite", Membrane and Water Treatmentthis link is disabled, 2022, 13(3), pp. 111–119 |
| Sohrabi-Kashani, L., Yekta, B.E., Rezaie, H.R., Zolriasatein, A., "Synergistic effect of micro- and nano-TiO2 on hydrophobic, mechanical, and electrical properties of hybrid polyurethane composites", Journal of Materials Science: Materials in Electronicsthis link is disabled, 2022 |
| Dini, F., Ghaffari, S.A., Javadpour, J., Rezaie, H.R., "Binder Jetting of Hydroxyapatite/Carboxymethyl Chitosan/Polyvinylpyrrolidone/Dextrin Composite: The Role of Polymeric Adhesive and Particle Size Distribution on Printability of Powders", Journal of Materials Engineering and Performancethis link is disabled, 2022 |
| Azari, R., Rezaie, H.R., Khavandi, A., "Effect of titanium dioxide intermediate layer on scratch and corrosion resistance of sol–gel-derived HA coating applied on Ti-6Al-4V substrate", Progress in Biomaterials, 2021, 10(4), pp. 259–269 |
| Zakeri, N., Rezaie, H.R., Javadpour, J., Kharaziha, M., "Effect of pH on cisplatin encapsulated zeolite nanoparticles: Release mechanism and cytotoxicity", Materials Chemistry and Physics, 2021, 273, 124964 |
| Sohrabi, M., Yekta, B.E., Rezaie, H.R., Naimi-Jamal, M.R., "The influence of 3-glycidyloxypropyl trimethoxysilane on the rheological and in-vitro behavior of injectable composites containing 64S bioactive glass, chitosan, and gelatin", Journal of Applied Polymer Science, 2021, 138(38), 50963 |
| Rashidi, E., Rezaie, H., Ghassai, H., "The effect of carbon nanotube addition on the mechanical properties and biological functionality of poly-ether-ether-ketone–hydroxyapatite composites", Polymer Composites, 2021, 42(7), pp. 3253–3261 |
| Karami, M., Masoudpanah, S.M., Rezaie, H.R., "Solution combustion synthesis of hierarchical porous LiFePO4 powders as cathode materials for lithium-ion batteries", Advanced Powder Technology, 2021, 32(6), pp. 1935–1942 |
| Esnaashary, M.H., Karfarma, M., Rezaie, H.R., Khavandi, A., Javadpour, J., "The Comparative Study of Gelatin/CNT-contained Mg-Ca-P Bone Cement with the Plain and CNT-reinforced Ones", Journal of Bionic Engineering, 2021, 18(3), pp. 623–636 |
| Sohrabi, M., Yekta, B.E., Rezaie, H., ...Miola, M., Rimondini, L., "The effect of magnesium on bioactivity, rheology and biology behaviors of injectable bioactive glass-gelatin-3-glycidyloxypropyl trimethoxysilane nanocomposite-paste for small bone defects repair", Ceramics International, 2021, 47(9), pp. 12526–12536 |
| Karami, M., Masoudpanah, S.M., Rezaie, H.R., "Structural, microstructural, and electrochemical properties of LiFePO4 powders synthesized by mixture of fuels", Journal of Sol-Gel Science and Technology, 2021, 98(1), pp. 193–201 |
| Najafi, A., Golestani-Fard, F., Rezaie, H.R., Saeb, S.P., "Sol-Gel synthesis and characterization of SiC–B4C nano powder", Ceramics International, 2021, 47(5), pp. 6376–6387 |
| Mehrabi, R., Rezaie, H.R., Eftekhari Yekta, B., "The effect of mineralizer addition and temperature on synthesis of malayaitepink pigment", Pigment and Resin Technology, 2021 |
| Nejatbakhsh, S., Anagri, A., Valinataj Omran, A., ...Javadpour, J., Arefi-Khonsari, F., "Improvement of the Bioactivity of UHMWPE by Two Different Atmospheric Plasma Treatments", Plasma Chemistry and Plasma Processing, 2021, 41(1), pp. 245–264 |
| Sohrabi, M., Eftekhari Yekta, B., Rezaie, H.R., Naimi-Jamal, M.R., "Rheology, injectability, and bioactivity of bioactive glass containing chitosan/gelatin, nano pastes", Journal of Applied Polymer Science, 2020, 137(41), 49240 |
| Baseri, J., Naghizadeh, R., Rezaie, H.R., Golestanifard, F., Golmohammad, M., "A comparative study on citrate sol-gel and combustion synthesis methods of CoAl2O4 spinel", International Journal of Applied Ceramic Technology, 2020, 17(6), pp. 2709–2715 |
| Saeb, S.P., Najafi, A., Golestanifard, F., Rezaie, H.R., "Improvement of alumina-based porous body fabricated by freeze casting route via alpha alumina/colloidal silica sol precursors", Materials Research Express, 2020, 7(10), 105005 |
| Karfarma, M., Esnaashary, M.H., Rezaie, H.R., Javadpour, J., Naimi-Jamal, M.R., "Enhancing degradability, bioactivity, and osteocompatibility of poly (propylene fumarate) bone filler by incorporation of Mg-Ca-P nanoparticles", Materials Science and Engineering C, 2020, 114, 111038 |
| Arianpour, F., Kazemi, F., Rezaie, H.R., "Thermodynamic study of zirconium carbide synthesis via a low-temperature pyrovacuum method", Journal of the Australian Ceramic Society, 2020, 56(3), pp. 969–977 |
| Irani, N., Rezaie, H.R., Naghizadeh, R., "Investigation on the effect of BaCO3 on the physical and mechanical properties of 5Ni/10N iO.NiFe2O4 cermet", Functional Composites and Structures, 2020, 2(2), 025005 |
| Kazemi, F., Arianpour, F., Taheri, M., Saberi, A., Rezaie, H.R., "Effects of chelating agents on the sol-gel synthesis of nano-zirconia: Comparison of the Pechini and sugar-based methods", International Journal of Minerals, Metallurgy and Materials, 2020, 27(5), pp. 693–702 |
| Ashjari, A., Eftekhari Yekta, B., Rezaie, H.R., "Crystallization and optical properties of alumino-silicate and alumino-borosilicate glasses containing indium tin oxide", Journal of the European Ceramic Society, 2020, 40(4), pp. 1368–1375 |
| Mahmoudi, Z., Tabaian, S.H., Rezaie, H.R., Mahboubi, F., Ghazali, M.J., "Synthesis of Ti2AlC & Ti3AlC2 MAX phases by Arc-PVD using Ti–Al target in C2H2/Ar gas mixture and subsequent annealing", Ceramics International, 2020, 46(4), pp. 4968–4975 |
| M Sohrabi, B Eftekhari Yekta, H Rezaie, MR Naimi-Jamal, A Kumar, ..., "Enhancing mechanical properties and biological performances of injectable bioactive glass by gelatin and chitosan for bone small defect repair", Biomedicines 8 (12), 616, 2020 |
| S Nejatbakhsh, A Anagri, AV Omran, J Pulpytel, C Bazin, M Ullah, ..., "Improvement of the Bioactivity of UHMWPE by Two Different Atmospheric Plasma Treatments", Plasma Chemistry and Plasma Processing, 1-20, 2020 |
| M Sohrabi, B Eftekhari Yekta, HR Rezaie, MR Naimi‐Jamal, "Rheology, injectability, and bioactivity of bioactive glass containing chitosan/gelatin, nano pastes", Journal of Applied Polymer Science 137 (41), 49240, 2020 |
| A Najafi, F Golestani-Fard, HR Rezaie, SP Saeb, "Sol-Gel synthesis and characterization of SiC–B4C nano powder", Ceramics International, 2020 |
| J Baseri, R Naghizadeh, HR Rezaie, F Golestanifard, M Golmohammad, "A comparative study on citrate sol‐gel and combustion synthesis methods of CoAl2O4 spinel", International Journal of Applied Ceramic Technology 17 (6), 2709-2715, 2020 |
| SP Saeb, A Najafi, F Golestanifard, HR Rezaie, "Improvement of alumina-based porous body fabricated by freeze casting route via alpha alumina/colloidal silica sol precursors", Materials Research Express 7 (10), 105005, 2020 |
| F Dini, SA Ghaffari, J Javadpour, HR Rezaie, "Preparation of 3D Printable HAp-based Composite Powder for Binder Jetting Process", 2020 |
| F Arianpour, F Kazemi, HR Rezaie, "Thermodynamic study of zirconium carbide synthesis via a low-temperature pyrovacuum method", Journal of the Australian Ceramic Society 56 (3), 969-977, 2020 |
| A Rezaie, M Godio, K Beyer, "Experimental investigation of strength, stiffness and drift capacity of rubble stone masonry walls", Construction and Building Materials 251, 118972, 2020 |
| N Irani, HR Rezaie, R Naghizadeh, "Functional Composites and Structures", 2020 |
| HR Rezaie, HB Rizi, MMR Khamseh, A Öchsner, "A Review on Dental Materials", Springer Nature, 2020 |
| PM Shad, SZ Karizi, RS Javan, A Mirzaie, H Noorbazargan, I Akbarzadeh, ..., "Folate conjugated hyaluronic acid coated alginate nanogels encapsulated oxaliplatin enhance antitumor and apoptosis efficacy on colorectal cancer cells (HT29 cell line)",Toxicology in Vitro 65, 104756, 2020 |
| N Irani, H Rezaie, R Naghizadeh, "Investigation on the effect of BaCO3 on the physical and mechanical properties of 5Ni/10NiO. NiFe2O4 cermet", Functional Composites and Structures, 2020 |
| M Karfarma, MH Esnaashary, HR Rezaie, J Javadpour, MR Naimi-Jamal, "Enhancing degradability, bioactivity, and osteocompatibility of poly (propylene fumarate) bone filler by incorporation of Mg-Ca-P nanoparticles", Materials Science and Engineering: C, 111038, 2020 |
| F Kazemi, F Arianpour, M Taheri, A Saberi, HR Rezaie, "Effects of chelating agents on the sol-gel synthesis of nano-zirconia: Comparison of the Pechini and sugar-based methods", International Journal of Minerals, Metallurgy and Materials 27, 693-702, 2020 |
| A Ashjari, BE Yekta, HR Rezaie, "Crystallization and optical properties of alumino-silicate and alumino-borosilicate glasses containing indium tin oxide", Journal of the European Ceramic Society 40 (4), 1368-1375, 2020 |
| F Foroohimanjili, A Mirzaie, SMM Hamdi, H Noorbazargan, ..., "Antibacterial, antibiofilm, and antiquorum sensing activities of phytosynthesized silver nanoparticles fabricated from Mespilus germanica extract against multidrug resistance …, ", Journal of Basic Microbiology 60 (3), 216-230, 2020 |
| Z Mahmoudi, SH Tabaian, HR Rezaie, F Mahboubi, MJ Ghazali, "Synthesis of Ti2AlC & Ti3AlC2 MAX phases by Arc-PVD using Ti–Al target in C2H2/Ar gas mixture and subsequent annealing", Ceramics International 46 (4), 4968-4975, 2020 |
| HR Rezaie, HB Rizi, MMR Khamseh, A Öchsner, "Dental Restorative Materials", A Review on Dental Materials, 47-171, 2020 |
| HR Rezaie, HB Rizi, MMR Khamseh, A Öchsner, "Application of the Finite Element Method in Dentistry", A Review on Dental Materials, 211-224, 2020 |
| Karfarma, M., Esnaashary, M.H., Rezaie, H.R., Javadpour, J., Naimi-Jamal, M.R., "Poly(propylene fumarate)/magnesium calcium phosphate injectable bone composite: Effect of filler size and its weight fraction on mechanical properties", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,233(11), pp. 1165-1174, 2019 |
| Azari, R., Rezaie, H.R., Khavandi, A., "Investigation of functionally graded HA-TiO2 coating on Ti–6Al–4V substrate fabricated by sol-gel method", Ceramics International, 45(14), pp. 17545-17555, 2019 |
| Heidari Bagherabadi, M., Naghizadeh, R., Rezaie, H.R., Fallah Vostakola, M., "The effects of aluminum and aluminum borate addition on the properties of MgO-C refractories", Journal of the Australian Ceramic Society, 55(1), pp. 281-288, 2019 |
| Mohammadzadeh, H., Rezaie, H., Barati, M., Yu, D., Samim, H.R., "Kinetics of nonisothermal reduction and carburization of WO 3 ─NiO nano-composite powders by CO─CO", International Journal of Chemical Kinetics, 2019 |
| Najafi, A., Golestani-Fard, F., Rezaie, H.R., "Sol-gel synthesis and characterization of B4 C nanopowder", Ceramics International, 44(17), pp. 21386-21394, 2018 |
| Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Evaluation of setting time and compressive strength of a new bone cement precursor powder containing Mg–Na–Ca", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(10), pp. 1017-1024, 2018 |
| Dabiri, S.M.H., Rezaie, A.A., Moghimi, M., Rezaie, H., "Extraction of Hydroxyapatite from Fish Bones and Its Application in Nickel Adsorption", BioNanoScience, 8(3), pp. 823-834, 2018 |
| Baseri, J., Naghizadeh, R., Rezaie, H.R., Golestanifard, F., "Spark plasma effect on microstructure and mechanical properties of alumina-nickel-cobalt composite", Ceramica, 64(371), pp. 431-435, 2018 |
| Zabihi, M., Ayatollahi, M.R., Rezaie, H.R, "Mixed-mode fracture of synthesized nanocrystalline forsterite for biomedical applications", Theoretical and Applied Fracture Mechanics, 2018 |
| Bagherabadi, M.H., Naghizadeh, R., Rezaie, H.R., Vostakola, M.F., "Synthesis of dehydrated magnesium borate powders and the effect on the properties of MgO-C refractories", Journal of Ceramic Processing Research, 19(3), pp. 218-223, 2018 |
| Esnaashary, M.H., Rezaie, H.R.Email Author, Khavandi, A., Javadpour, J., "Solubility controlling of the precursor powders of magnesium phosphate cement by changing the powder composition", Advances in Applied Ceramics, Volume 116, Issue 5, 4 July 2017, Pages 286-292 |
| Baseri, J., Naghizadeh, Rezaie, H.R, "Preparation and mechanical properties of alumina/spinel/metal composite with three different sintering methods", Journal of Ceramic Processing Research, Volume 18, Issue 1, 2017, Pages 21-26 |
Maskani, N., Naghizadeh, R., Mirhabibi, A., Rezaie, H., "Synthesis of Al 2O 3-ni composite powders by co-precipitation method", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 31-37
|
| Mohammadzadeh Valendar, H., Yu, D., Barati, M., Rezaie, H.R., "Isothermal kinetics of reduction and carburization of WO3–NiO nanocomposite powder by CO/CO2", Journal of Thermal Analysis and Calorimetry, Volume 128, Issue 1, 1 April 2017, Pages 553-566 |
| Bakhtiari, L., Javadpour, J., Rezaie, H.R., Erfan, M., Mazinani, B., Aminian, A., "Pore size control in the synthesis of hydroxyapatite nanoparticles: The effect of pore expander content and the synthesis temperature", Ceramics International, Volume 42, Issue 9, 1 July 2016, Pages 11259-11264 |
| Arianpour, F., Golestanifard, F., Rezaie, H., Mazaheri, M., Celik, A., Kara, F., Fantozzi, G., "Processing, phase evaluation and mechanical properties of MoSi2 doped 4TaC-HfC based UHTCs consolidated by spark plasma sintering", International Journal of Refractory Metals and Hard Materials, Volume 56, April 2016, Pages 1-7 |
| Zahedi, A.M., Javadpour, J., Rezaie, H.R., Mazaheri, M., "Analytical study on the incorporation of zirconia-based ceramics with carbon nanotubes: Dispersion methods and mechanical properties", Ceramics International, Volume 42, Issue 1, January 2016, Pages 1653-1659 |
| Zahedi, A.M.,Rezaie, H.R. , Javadpour, J., "The effect of carbon nanotubes on the sintering behavior of zirconia based materials",Iranian Journal of Materials Science and Engineering, Volume 12, Issue 4, December 2015, Pages 1-8 |
| Dehkordi, E.N., Samim Banihashemi, H.R. , Naghizadeh, R., Rezaie, H.R., Goodarzi, M., "Synthesis of aluminum nitride in a coke–calcium reduction bed using nitrogen in air", International Journal of Minerals, Metallurgy and Materials, Volume 22, Issue 9, 14 September 2015, Pages 972-976 |
| Bakhtiari, L., Rezaie, H.R., Javadpour, J., Erfan, M., Shokrgozar, M.A., "The effect of synthesis parameters on the geometry and dimensions of mesoporous hydroxyapatite nanoparticles in the presence of 1-dodecanethiol as a pore expander", Materials Science and Engineering C, Volume 53, 1 August 2015, Pages 1-6 |
| Najafi, A., Golestani-Fard, F., Rezaie, H.R., "Improvement of SiC nanopowder synthesis by sol–gel method via TEOS/resin phenolic precursors",Journal of Sol-Gel Science and Technology, Volume 75, Issue 2, 21 April 2015, Pages 255-263 |
| Nouri-Khezrabad, M., Salvini, V.R., Luz, A.P., Golestani-Fard, F., Rezaie, H.R., Pandolfelli, V.C., "Rheological performance of high alumina nano-bonded refractory castables containing carboxylic acids as additives", Ceramics International, April 12, 2015 |
| Amouzegar, Z., Naghizadeh, R., Rezaie, H.R., Ghahari, M., "An investigation on ZnWO 4 nano-powder synthesis using LiNO 3 -KNO 3 medium at low temperature", Materials Research Innovations, Volume 19, Issue 5, 1 August 2015, Pages 332-337 |
| Khoshomid Aghdam, E., Naghizadeh, R., Rezaie, H.R., "Synthesis of MgAl 2 O 4 -Ti(C,N) nanocomposite by aluminothermic reduction",Iranian Journal of Materials Science and Engineering, Volume 12, Issue 3, 1 September 2015, Pages 75-82 |
| Amouzegar, Z., Naghizadeh, R., Rezaie, H.R., Ghahari, M., Aminzare, M., "Cubic ZnWO4 nano-photocatalysts synthesized by the microwave-assisted precipitation technique", Ceramics International, Volume 41, Issue 1, 2015, Pages 1743-1747 |
| Amouzegar, Z., Naghizadeh, R., Rezaie, H.R., Ghahari, M., Aminzare, M., "Microwave engineering of ZnWO 4 nanostructures: Towards morphologically favorable structures for photocatalytic activity", Ceramics International, Volume 41, Issue 7, 1 August 2015, Pages 8352-8359 |
| Mohammadzadeh, H., Rezaie, H., Samim, H., Barati, M., Razavizadeh, H., "Synthesis of WC-Ni composite powders by thermochemical processing method based on co-precipitation", Materials Chemistry and PhysicsVolume 149, 15 January 2015, Pages 145-155 |
| Bakhtiari, L., Rezaie, H.R., Javadpour, J., Erfan, M., Shokrgozar, M.A., "The effect of micellization pH on properties of sphere-like mesoporous hydroxyappatite", International Journal of Engineering, Transactions A: Basics, Volume 28, Issue 7, 1 July 2015, Pages 1088-1095 |
| Bakhtiari, L., Javadpour, J., Rezaie, H.R., Erfan, M., Shokrgozar, M.A., "The effect of swelling agent on the pore characteristics of mesoporous hydroxyapatite nanoparticles", Progress in Natural Science: Materials International, Volume 25, Issue 3, 1 June 2015, Pages 185-190 |
| Nouri-Khezrabad, M., Luz, A.P., Salvini, V.R., Golestani-Fard, F., Rezaie, H.R., Pandolfelli, V.C., "Developing nano-bonded refractory castables with enhanced green mechanical properties", Ceramics InternationalVolume 41, Issue 2, 1 March 2015, Pages 3051-3057 |
| Zahedi, A.M., Gonzalez-Julian, J., Mazaheri, M., Javadpour, J., Rezaie, H.R., Guillon, O., "Field-assisted/spark plasma sintering behavior of CNT-reinforced zirconia composites: A comparative study between model and experiments", Journal of the European Ceramic Society, Volume 35, Issue 15, 1 December 2015, Pages 4241-4249 |
| Naghizadeh, R., Kazemi, F., Arianpour, F., Ghaderi, R., Haj Fathalian, M., Taheri, M., Rezaie, H.R., "A novel method for quantitative phase determination of cristobalite in ceramic cores using differential scanning calorimeter", Journal of Thermal Analysis and Calorimetry, Volume 119, Issue 1, January 2015, Pages 191-195 |
| Najmoddin, N., Rezaie, H.R., Beitollahi, A., Toprak, M.S., "Influence of the preparation method on the structure, phase formation and magnetic properties of templated CUFE2O4 spinel", Iranian Journal of Materials Science and Engineering, Volume 11, Issue 3, September 2014, Pages 1-10 |
| Taheri, M., Mazaheri, M., Golestani-Fard, F., Rezaie, H., Schaller, R., "High/room temperature mechanical properties of 3Y-TZP/CNTs composites", Ceramics International, Volume 40, Issue 2, March 2014, Pages 3347-3352 |
| Najmoddin, N., Beitollahi, A., Kavas, H., Majid Mohseni, S., Rezaie, H., Åkerman, J., Toprak, M.S., "XRD cation distribution and magnetic properties of mesoporous Zn-substituted CuFe2O4", Ceramics International,Volume 40, Issue 2, March 2014, Pages 3619-3625 |
| Dallali Isfahani, T., Javadpour, J., Khavandi, A., Goodarzi, M., Rezaie, H.R., "Nanocrystalline growth activation energy of zirconia polymorphs synthesized by mechanochemical technique",Journal of Materials Science and Technology, Volume 30, Issue 4, April 2014, Pages 387-393 |
| Nouri-Khezrabad, M., Luz, A.P., Golestani-Fard, F., Rezaie, H.R., Pandolfelli, V.C., "Citric acid role and its migration effects in nano-bonded refractory castables", Ceramics International, Volume 40, Issue 9 PART A, 2014, Pages 14523-14527 |
| Hashemi, M., Mirdamadi, S., Rezaie, H.R., "Effect of SiC nanoparticles on microstructure and wear behavior of Cu-Ni-W nanocrystalline coating", Electrochimica Acta, Volume 138, 20 August 2014, Pages 224-231 |
| Mohammadzadeh Valendar, H., Rezaie, H., Samim, H., Barati, M., Razavizadeh, H., "Reduction and carburization behavior of NiO-WO3 mixtures by carbon monoxide",Thermochimica Acta,Volume 590, 20 August 2014, Pages 210-218 |
| Najmoddin, N., Beitollahi, A., Muhammed, M., Ansari, N., Devlin, E., Mohseni, S.M., Rezaie, H., Niarchos, D., Åkerman, J., Toprak, M.S., "Effect of nanoconfinement on the formation, structural transition and magnetic behavior of mesoporous copper ferrite", Journal of Alloys and Compounds, Volume 598, 15 June 2014, Pages 191-197 |
| Najmoddin, N., Beitollahi, A., Devlin, E., Kavas, H., Mohseni, S.M., Åkerman, J., Niarchos, D., Rezaie, H., Muhammed, M., Toprak, M.S., "Magnetic properties of crystalline mesoporous Zn-substituted copper ferrite synthesized under nanoconfinement in silica matrix", Microporous and Mesoporous Materials, Volume 190, 15 May 2014, Pages 346-355 |
| Najafi, A., Golestani-Fard, F., Rezaie, H.R., "The effect of processing parameters on sol gel synthesis of β-SiC nano powder", Iranian Journal of Materials Science and Engineering, Volume 11, Issue 1, 2014, Pages 53-61 |
| Omid, E.K., Naghizadeh, R., Rezaie, H.R., "Synthesis and comparison of MgAl2O4-Ti (C, N) composites using aluminother-mic-carbothermal reduction and molten salts routes", Journal of Ceramic Processing ResearchVolume 14, Issue 4, 2013, Pages 445-447 |
| Mahmoodi, M., Hossainalipour, S.M., Naimi-Jamal, M.R., Samani, S., Samadikuchaksaraei, A., Rezaie, .R., "Influence of RGD grafting on biocompatibility of oxidized cellulose scaffold", Artificial Cells, Nanomedicine and Biotechnology, Volume 41, Issue 6, December 2013, Pages 421-427 |
| Yazdani, A., Rezaie, H.R., Ghassai, H., Mahmoudian, M. , "The effect of processing parameters on the hydrothermal synthesis of wollastonite at low pressure", Journal of Ceramic Processing Research, Volume 14, Issue 1, 2013, Pages 12-16 |
| Isfahani, T.D., Javadpour, J., Khavandi, A., Rezaie, H.R., Goodarzi, M., "Nanocrystalline growth activation energy of alumina polymorphs synthesised by mechanochemical technique", Advances in Applied CeramicsVolume 112, Issue 6, August 2013, Pages 316-321 |
| Taghavi Pourian Azar, G., Rezaie, H.R. , Gohari, B., Razavizadeh, H., "Synthesis and densification of W-Cu, W-Cu-Ag and W-Ag composite powders via a chemical precipitation method", Journal of Alloys and CompoundsVolume 574, 2013, Pages 432-436 |
| Nouri-Khezrabad, M., Braulio, M.A.L., Pandolfelli, V.C., Golestani-Fard, F., Rezaie, H.R., "Nano-bonded refractory castables",Ceramics International, Volume 39, Issue 4, May 2013, Pages 3479-3497 |
| Abbasi, S., Rezaie, H.R., Golestani-Fard, F., "Microstructure and properties of nanostructured calcium phosphate/ titania porous coatings via micro arc oxidation", Advanced Structured Materials, Volume 29, 2013, Pages 227-234 |
| Mostaed, A., Saghafian, H., Mostaed, E., Shokuhfar, A., Rezaie, H.R., "Effect of reinforcing particle type on morphology and age-hardening behavior of Al-4.5 wt.% Cu based nanocomposites synthesized through mechanical milling", Materials Characterization, Volume 76, 2013, Pages 76-82 |
| Arianpour, F., Rezaie, H.R., Golestani Fard, F., Fantozzi, G., Mazaheri, M., "Processing and consolidation of TaC/HfC based composites using MoSi 2 and carbon nanotubes",Journal of Nano Research, Volume 21, 16 January 2013, Pages 144-150 |
| Samani, S. , Hossainalipour, S.M., Tamizifar, M., Rezaie, H.R, "In vitro antibacterial evaluation of sol-gel-derived Zn-, Ag-, and (Zn + Ag)-doped hydroxyapatite coatings against methicillin-resistant Staphylococcus aureus", Journal of Biomedical Materials Research - Part A, Volume 101 A, Issue 1, January 2013, Pages 222-230 |
| Hajiali, H., Karbasi, S., Hosseinalipour, M., Rezaie, H.R., "Effects of bioglass nanoparticles on bioactivity and mechanical property of poly(3-hydroxybutirate) scaffolds", Scientia Iranica, Volume 20, Issue 6, 2013, Pages 2306-2313 |
| Arianpour, F., Kazemi, F., Rezaie, H.R., Asjodi, A., Liu, J., "Nano zirconium carbide powder synthesis via carbothermal route",Defect and Diffusion Forum, Volume 334-335, 2013, Pages 381-386 |
| Nouri, E., Shahmiri, M., Rezaie, H.R., Talayian, F., "The effect of alumina content on the structural properties of ZrO2-Al2O3 unstabilized composite nanopowders", Volume 3, Issue 1, 1 December 2012, Article number 17, Pages 1-8 |
| Abbasi, S., Golestani-Fard, F., Rezaie, H.R., Mirhosseini, S.M.M., "MAO-derived hydroxyapatite/TiO 2 nanostructured multi-layer coatings on titanium substrate", Applied Surface ScienceVolume 261, 15 November 2012, Pages 37-42 |
| Abbasi, S., Golestani-Fard, F., Rezaie, H.R., Mirhosseini, S.M.M., Ziaee, A., "MAO-derived hydroxyapatite-TiO 2 nanostructured bio-ceramic films on titanium", Materials Research Bulletin, Volume 47, Issue 11, November 2012, Pages 3407-3412 |
| Isfahani, T.D., Javadpour, J., Khavandi, A., Dinnebier, R., Goodarzi, M., Rezaie, H.R., "Mechanochemical synthesis of alumina nanoparticles: Formation mechanism and phase transformation", Powder TechnologyVolume 229, October 2012, Pages 17-23 |
| Najafi, A., Golestani-Fard, F., Rezaie, H.R., Ehsani, N., "A novel route to obtain B 4C nano powder via sol-gel method", Ceramics International, Volume 38, Issue 5, July 2012, Pages 3583-3589 |
| Nouri, E., Shahmiri, M., Rezaie, H.R., Talayian, F., "A comparative study of heat treatment temperature influence on the thickness of zirconia sol-gel thin films by three different techniques: SWE, SEM and AFM", Surface and Coatings Technology, Volume 206, Issue 19-20, 25 May 2012, Pages 3809-3815 |
| Mostaed, E., Saghafian, H., Mostaed, A., Shokuhfar, A., Rezaie, H.R., "Investigation on preparation of Al-4.5%Cu/SiC p nanocomposite powder via mechanical milling", Powder Technology, Volume 221, May 2012, Pages 278-283 |
| Khodamorad, S.H., Haghshenas Fatmehsari, D., Rezaie, H., Sadeghipour, A., "Analysis of ethylene cracking furnace tubes", Engineering Failure Analysis, Volume 21, April 2012, Pages 1-8 |
| Hayati, A.N., Hosseinalipour, S.M., Rezaie, H.R., Shokrgozar, M.A., "Characterization of poly(3-hydroxybutyrate)/nano-hydroxyapatite composite scaffolds fabricated without the use of organic solvents for bone tissue engineering applications", Materials Science and Engineering C, Volume 32, Issue 3, 1 April 2012, Pages 416-422 |
| Najafi, A., Fard, F.G., Rezaie, H.R., Ehsani, N., "Synthesis and characterization of SiC nano powder with low residual carbon processed by sol-gel method", Powder Technology, Volume 219, March 2012, Pages 202-210 |
| Azar, G.T.P., Rezaie, H.R. , Razavizadeh, H., "Synthesis and consolidation of W-Cu composite powders with silver addition", International Journal of Refractory Metals and Hard Materials, Volume 31, March 2012, Pages 157-163 |
| Dallali Isfahani, T., Javadpour, J., Khavandi, A., Dinnebier, R., Rezaie, H.R., Goodarzi, M., "Mechanochemical synthesis of zirconia nanoparticles: Formation mechanism and phase transformation", International Journal of Refractory Metals and Hard Materials, Volume 31, March 2012, Pages 21-27 |
| Jahangiri, M., Hashempour, M., Razavizadeh, H., Rezaie, H.R., "Application and conceptual explanation of an energy-based approach for the modelling and prediction of sliding wear", Wear, Volume 274-275, 27 January 2012, Pages 168-174 |
| Jahangiri, M., Hashempour, M., Razavizadeh, H., Rezaie, H.R., "A new method to investigate the sliding wear behaviour of materials based on energy dissipation: W-25wt%Cu composite",Wear, Volume 274-275, 27 January 2012, Pages 175-182 |
| Roohibakhsh, R., Rezaie, H.R., Razavizadeh, H., "Synthesis and characterization of Cu-10-20wt%Ni nanopowders by a chemical precipitation route", Journal of Nano Research, Volume 16, 11 January 2012, Pages 141-151 |
|
N. Keivani, V. Marghussian, H. R. rezaie, M. Kord, "Effect of Al2O3 content on crystallization behavior, microstructure , and mechanical properties of SiO2-Al2O3-CaO-MgO glass-ceramics", Applied Ceramic Technology, 8, 203-213, (2011).
|
|
A. Nemati, H. R. Rezaie, S. M. Hoseinalipour, "Prepration of poly (3-hydroxybutyrate)/nano-hydroxyapatite composite scaffolds for bone tissue engineering", Materials Letter, 65, 736-739, (2011).
|
|
S. Mahdavi, V. Mahdavi, M. Samedani, H. R. Rezaie, "Investigation of the percentage crystallization in glass ceramics using an image analyzer method", Ceramic Processing Research, 12, 34-37, (2011).
|
|
R. Naghizadeh, H. R. Rezaie, F. Golestani Fard, "Effect of TiO2 on phase evolution and micrstructure of MgAl2O4 spinel in different atmospheres", Ceramic International, 37, 349-354, (2011).
|
|
M. Aminzare, M. Mazaheri, F. Golestani Fard, H. R. Rezaie, R. Ajeian, "Sintering behavior of nano alumina powder shaped by pressure filtration", Ceramics International, 37, 9–14, 2011.
|
|
H. R. Rezaie, R. Mohammad Rahimi, A. Nemati, M. Samadani, "Synthesis and characterization of Al2O3-SiC nano composite by sol-gel method and the effect of TiO2 on sintering", Journal of Nano Research, 13, 7-19, (2011).
|
|
Z. Zadegan, M. Hossainalipour, H. Ghassai, H.R. Rezaie, M.R. Naimi-Jamal "Synthesis of cellulose - nanohydroxyapatite composite in 1-n-butyl-3-methylimidazolium chloride", Ceramic International, 36,2010,pp.2375-2381.
|
|
M. Ardestnai, H. Aarbi, H. Razavizadeh, H. R. Rezaie, B. Jankovic, S. Mentus. "An investigation about the activation energies of the reduction transitions of fine dispersed CuWO4−x/WO3−x oxide powders", International Journal of Refractory Metals and Hard Materials, 28, 383-387, (2010).
|
|
H. Ghayour, A. Nourbakhsh, Sh. Mirdamadi, H. R. Rezaie, "Illustration of effective parameters on growth of ZnO Micro/Nano rods, on the borosilicate glass via hydrothermal process", Journal of Nanoscience and Nanothecnology, 10, 7455-7458, (2010).
|
| A. Yazdani, H.R. Rezaie, H. Ghassai, "Investigation of hydrothermal synthesis of Wollastonite using Silica and Nano Silica at different pressures", Journal of Ceramic Processing Research, 11[3],2010,pp.348-353. |
|
A. Najafi, F. Golestani Fard, H. R. Rezaie, N. Ehsani, "Effect of APC addition on stability of nanosize precursors in sol-gel processing of SiC nanopowder", Journal of Alloys and Compounds, 505, 692-697, (2010).
|
|
M. Aminzare, F. Golestani Fard, O. Guillon, M. Mazaheri, H. R. rezaie, "Sintering behavior of an ultrafine alumina powder shaped by pressure filtration and dry pressing", Material Science and Engineering A, 527, 3807–3812, (2010).
|
|
M. Ardestani, H. Arabi, H. Razavizadeh, H. R. Rezaie, H. Mehrjoo, "Synthesis of WC–20 wt. % Cu composite powders by co-precipitation and carburization processes", Materials Science-Poland, 28, 413-420, (2010).
|
|
L. Bakhtiari, H. R. Rezaie, S. M. Hoseinalipour, M. A. Shokrgozar, "Investigation of biphasic calcium phosphate/gelatin nanocomposite scaffolds as a bone tissue engineering", Ceramics International, 36, 2421–2426, (2010).
|
|
M. Hashempour, H. Razavizadeh, H. R. Rezaie, Ma. Hashempour, M. Ardestani, "Chemical mechanism of precipitate formation and pH effect on the morphology and thermochemical co-precipitation of W–Cu nanocomposite powders", Materials Chemistry and Physics, 123, 83–90, (2010).
|
|
M. Hoseinalipour, J. Javadpour, H. R. Rezaie, T. Dadras, A. Nemati, "Investigation of mechanical properties of experimental Bis - GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles", Journal of Prosthodontics, 19, 112-117, (2010).
|
|
Effect of precursor rooted contamination in the sintering and densification behavior of thermochemically manufactured W-CU nanocomposite, International Journal of Modern Physics B, 24, 183-190, (2010).
|
| A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, " The influence of milling time and impact force on the mutual diffusion of Al and Cu during synthesis of Al-4.5wt%Cu alloy via mechanical alloying", Defect and Diffusion Forum, 2009 |
| A. Mostaed, E. Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, " Effect of SiC particles volume fraction on the mutual diffusion of Al and Cu during fabrication of Al-4.5wt% Cu/SiC via mechanical alloying", Defect and Diffusion Forum, 2009 |
| H.R. Rezaie, R. Naghizadeh, N. Farrokhnia, S. Arabi, M. Sobhani, " The Effect of Fe2O3 addition on tialite formation", Ceramics International 35, 2009, pp. 679-684 |
| S. Banijamali, B. Eftekhari, H.R. Rezaie, V.K. Marghussian, "Crystallization and sintering characteristics of CaO-Al2O3-SiO2 glasses in the presence of TiO2, CaF2 and ZrO2" Thermochimica Acta, 2009, pp. 60-65 |
| M.R. Rezaie, H.R. Rezaie, R. Naghizadeh, " The effect of SiO2 additions on barium aluminate cement formation and properties", Ceramics International, 2009 |
|
The effect of sintering temperature on densification of nanoscale dispersed W–20–40%wt Cu composite powders, International Journal of Refractory Metals and Hard Materials, 27, 862-867, (2009).
|
| R. Naghizadeh, H.R. Rezaie, F. Golestani-Fard, " The influence of composition, cooling rate and atmosphere on the synthesis and thermal stability of aluminium titanate", Materials Science and Engineering B, 157, 2009, pp. 20-25 |
| M. Bavand-Vandchali, H. Sarpoolaky, F. Golestani-Fard, H.R. Rezaie, "Atmosphere and carbon effects on microstructure and phase analysis of in situ spinel formation in MgO-C refractories matrix", Ceramics International 35, pp. 861-868, 2009 |
|
Thermochemical preparation of W–25%Cu nanocomposite powder through a CVT mechanism, Materials Characterization, 60, 1232-1240, (2009)
|
| M. Ebrahimi, J. Javadpoor, H.R. Razaie, M. Goodarzi, " Mechanochemical synthesis of alumina-zirconia nanocomposite powder", Advances in Applied Ceramics, 107, 2008 |
| A.M. Zahedi, H.R. Rezaie, J. Javadpoor, M. Mazaheri, M.G. Haghighi, " Processing and impact behaviour of Al/SiCp composites fabricated by the pressureless melt infiltration method", Ceramic International, 2008 |
| G. Naderi, H.R. Rezaie, A. Shokuhfar, R. Naghizadeh, S. Atashgar, "The effct of talc on the reaction sintering, microstructure and physical properties of Al2TiO5 based ceranics", Journal of Ceramic Processing Research, Vol. 9, No. 2, 2008 |
| R. Naghizadeh, H.R. Rezaie, F. Golestani-fard, " Phase and microstructural evolution of high TiO2-containing Iranian bauxite at high temperatures in different atmospheres", Journal of Ceramic Processing Research, Vol. 9, No. 4, 2008, pp. 343-347 |
| M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, "The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories", Journal of the European Ceramic Society 28, 2008, pp. 563-569 |
| H.R. Zargar, F. Golestani-Fard, H.R. Rezaie, "The influence fo nano boehmite on spinel formation in the alumina-magnesi system at low temperatures", Journal of Ceramic Processing Research, Vol. 9, No.1, 2008, pp. 46-51 |
|
H.R. Rezaie, R. Naghizadeh, F. Ariapour, R. Ghasemzadeh, S. Eslami, "An evalution on sol-gel chemical processing of refractory barium hexa aluminate fibrous structures", Journal of Ceramic Processing Research, 2008
|
| S. Mobini, J. Javadpour, M. Hosseinalipour, A. Khavandi, H.R. Rezaie, M. Ghazi-Khansari" Synthesis and characterization of gelatin-nano hydroxyapatite composite scaffolds for bone tissue engineering", Advandes in Applied Ceramics, 2007 |
|
M. Bavand, F. Golestani-Fard, H. Sarpoolaky, H.R. Rezaie, C.G. Aneziris, "The influence of insitu spinel formation on microstructure and phase evolution of MgO-C refractories", Journal of the European Ceramic Society, 2007
|
|
G. Naderi, A. Shokuhfar, H.R. Rezaie, R. Naghizadeh, T. Shokuhfar, "Effect of micron and nanosize oxide material additives on reaction sintering, micro structural and physical properties of Al2TiO5 based ceramics", Materials Science Forum, Vol. 553, 2007, pp. 266-272
|
|
H.R. Zargar, F. Golestani-Fard, H.R. Rezaie, "The influence of nano boehmite on spinel formation in the alumina-magnesia system at low temperature", Journal of Ceramic Processing Research, Vol. 6, 2007
|
|
M.N. Khezrabadi, J. Javadpour, H. R. Rezaei, R. Naghizadeh, "The effect of additives on the properties and microstructures of Al2O3-C refractories", Journal of Materials Science, 2006
|
|
A. A. Nourbakhsh, F. Golestani Fard, H. R. Rezaie , " Influence of additives on microstructural changes in nitride bonded I refractories ", J. of the European ceramic society , Vol. 26, 2006, pp. 1737-1741
|
|
H. Baradari, H. Amani, S. Karimi, H. R. Rezaie, J. Javadpour, H. Sarpoolaky, "The effect of raw materials concentration on hydroxyapatite powder characteristics and sintering behaviour", Iranian J. of Mat. Sci. and Eng., Vol. 1, 2006
|
|
S. Banijamali, B. Eftekhari, H. R. Rezaie, V. K. Marghussian, "Effect of fluorine content on sintering and crystallization behaviour of CaO-Al2O3-SiO2 glass ceramic system", Advanced in Applied Ceramics, Vol. 6, 2006
|
|
S. Banijamali, H. R. Rezaie, B. Eftekhari, V. K. Marghussian, "Sinterability, crystallization and properties of glass-ceramic tiles belonging to CaF2-CaO-MgO-Al2O3-SiO2 system", Ceramics Int. , 2006
|
|
A.A. Nourbakhsh, F. Golestani Fard, H. R. Rezaie, "Influence of additives on microsturctural changes in nitride bonded SiC refractories", J. of the Eur. Cer. Soc., Vol. 26, 2006, pp. 1737-1747
|
|
مقالات چاپ شده در مجلات علمی – فارسی
|
| سعید زارع مهرجردی، حمید رضا رضائی ، حسین قصاعی " وابستگی پین هول از ترکیب و نقطه نرم شوندگی لعاب کاشی مونوپروزا" فصلنامه سرامیک ساختمان ،8، 1389 |
| کاظمی، ولی محمد، حمیدرضا رضایی، حسین فرمان، رحیم نقی زاده،" سنتز کوردیریت به روش حالت جامد در حضور افزودنی ها"، فصلنامه سرامیک ایران، شماره14، 1387 |
| اردستانی، حمیدرضا رضایی، حسین عربی، حکمت رضوی زاده، " بررسی مرحله کلسیناسیون در سنتز پودرهای کامپوزیتی مس- تنگستن با روش رسوبدهی شیمیایی"، نشریه فرهنگستان علوم،1387 |
| سهرابی، رضایی، سرپولکی، کاظمی،" استخراج زیرکونیا از زیرکون به روش ذوبی"، فصلنامه سرامیک ایران،1387 |
|
حمیدرضا زرگر، حسین سرپولکی، حمیدرضا رضائی، "آشنائی با پوشش های سرامیکی محافظ حرارت و روشهای اعمال"، فصلنامه سرامیک ایران، شماره 5و6، 1385
|
|
حمیدرضا رضائی، حسین قصاعی، لیلا تقی‌زاده، حمیدرضا اطلاعی، "تهیه و بررسی فرمولاسیون بدنه و لعاب کاشی تک‌پخت دیواری"، مجله بین المللی علوم مهندسی، شماره 4، 1385
|
|
بنی جمالی ، حمیدرضا رضائی ، بیژن افتخاری یکتا ، واهاک مارقوسیان ، حسین قصاعی، "بررسی اثر CaF2 بر رفتار تبلور و زینتر شدن کاشیهای شیشه – سرامیکی سیستم CaO-Al2O3-SiO2 "، فصلنامه سرامیک ایران، شماره 1، 1384
|
|
حمیدرضا رضائی ، رحیم نقی زاده ، فرزین آریان پور، "بررسی اثر میزان و نوع بایندرهای فسفاتی و کائولن بر استحکام و خواص فیزیکی جرمهای دیرگداز تعمیری زیرکنی"، فصلنامه سرامیک ایران، شماره 2، 1384
|
|
رحیم نقی زاده ، مرتضی تمیزی فر ، حمیدرضا رضائی ، سعید شهراد، "مقایسه خواص جرمهای ریختنی آلومینا-اسپینل با آلومینا-منیزیا"، مجله مهندسی متالورژی، شماره 21، 1384
|
|
حمیدرضا رضائی، رحیم نقی زاده، حسین سرپولکی، فرزین آریان پور، "بررسی خواص جرمهای سیلیسی کوبیدنی مصرفی در کوره های القایی فرکانس متوسط"، مجله بین المللی علوم مهندسی، شماره 4، صفحات 11-20، 1384
|
|
حمیدرضا رضائی، رحیم نقی زاده، حسین سرپولکی، جلیل پور اسد، مهدی شفیعی، سارا بنی جمالی، "اثر شکل و اندازه دانه بر خواص فیزیکی جرمهای کوبیدنی سیلیسی"، فصلنامه سرامیک ایران، شماره 4، 1384
|
|
فرزین آریان پور، حمیدرضا رضائی، "بررسی مواد دیرگداز مصرفی در صنعت آلومینیوم"، مجله آلومینیوم، شماره 11، 1382
|
|
مقالات ارائه شده در مجامع علمی – لاتین
|
| Zahra Mahmoudi, Hamid Reza Rezaie, Hossein Ghassai, "Investigation of Different Phase Formation in a Frittic Glaze at Different Temperatures" 15th. International Metallurgy and Materials Congress, Istanbul- Turkey, 2010 |
| M. Bavand-Vandchali, H. Sarpoolaky, F.Golestani-Fard, H.R. Rezaie, " Corrosion study of spinel-bonded MgO-C refractories by silicate slags", 51th Int. Colloquium on Refractories-Refractories for Metallurgy, 2008 |
| A. Mostaed, E . Mostaed, A. Shokuhfar, H. Saghafian, H.R. Rezaie, "Fabrication of nanostructured Al-4.5 wt% Cu alloy and Al-4.5wt% Cu/SiC composite via mechanical alloying" |
|
M. Sobhani, H. R. Rezaie, R. Naghizadeh, M. Samadani, " Low temperature synthesis of aluminium titanate (Al2TiO5) nanocrystalline by sol-gel method ", First Congress on Nanoscience & Nanotechnology, 2006
|
|
H.R. Rezaie, F. Arianpour, R. Naghizadeh, F. Kazemi , "An evaluation of the effects of different phosphate binders on the properties and microstructure of tundish coating refractories", Conf. Ashen, 2006
|
|
A. Najafi, H. Sarpoolaky, F. Arianpour, H.R. Rezaie, F. Golestani Fard, "An investigation on the effects of particle size distribution on the properties and flowability of Alumina spinel self flow refractory castables", Unitcer Congress, 2005
|
|
F. Arianpour, H. R. Rezaie, R. Naghizadeh, A. Najafi, "An evaluation on the properties of magnesia insulating refractories for Tundish coating at different temperatures", Unitcer Congress, Japan, 2005
|
|
H.R. Rezaie, R. Naghizadeh, F. Aryanpur, "Effect of Magnesia and Binder type on properties and performance of Tundish coating refractories", Unitcer Congress, Japan, 2003
|
|
H.R. Rezaie, R. Naghizadeh, F. Aryanpur, J. Kazemi, "Investigation and improvement of tundish lining refractories", The forth International Symposium on Refractories, China, 2003
|
|
مقالات ارائه شده در مجامع علمی – فارسی
|
| پدرام مهدیزاده، سید محمد حسینعلی پور، حمیدرضا رضائی، جعفر جوادپور، مهدی شاهدی اصل، محمدرضا فروزانمهر،" پوشش دهی هیدروکسی آپاتیت بر روی فولاد 316L به روش غوطه وری سل ژل به منظور کاربرد در ارتوپدی"، نهمین سمینار مهندسی سطح و عملیات حرارتی،1387 |
| محمد جواد بنی عامریان، حسین فرمان، حمیدرضا رضایی، رحیم نقی زاده،" سنتز و شناسایی نانوذرات اسپینل آلومینات منیزیم حاوی افزودنی نیکل"، نهمین کنفرانس ماده چگال انجمن فیزیک ایران،1387 |
| محمد قنادی، حسین فرمان، حمیدرضا رضایی، رحیم نقی زاده،" بررسی سنتز پودر اسپینل آلومینا منیزیم در حالت های خالص و دوپ شده با آهن به روش سل-ژل"، نهمین کنفرانس ماده چگال انجمن فیزیک ایران،1387 |
| محمد جواد عامریان، محمد قنادی، حسین فرمان، حمید رضا رضایی، رحیم نقی زاده،" مقایسه و بررسی سنتز پودر اسپینل MgAl2O4 به روش سل-ژل با دو حلال آبی و اتانولی"، نهمین کنفرانس ماده چگال انجمن فیزیک ایران،1387 |
| علی مستعد، احسان مستعد، علی شکوه فر، حسن ثقفیان، حمیدرضا رضایی، " بررسی تأثیر پارامترهای زمان آسیا کاری و نسبت گلوله به پودر بر اندازه دانه های کریستالی در تولید آلیاژ Al-4.5 wt% Cu به روش آلیاژسازی مکانیکی"، نهمین کنفرانس مهندسی ساخت و تولید ایران،1387 |
|
میرکاظمی، مارقوسیان، بیت اللهی، رضائی، بهرامی، "بررسی اثر جوانه زایی اکسید کروم بر روی رفتار تبلور، ریزساختار و خواص مغناطیسی شیشه سرامیک سیستم BaO-Fe2O3-B2O3-SiO2 "، ششمین کنگره سرامیک ایران، 1386
|
|
مسعود محمدیان، حمیدرضا رضائی، حسین قصاعی، "بررسی آنالیز حرارتی و فازی لعاب متالیک سرب دار حاوی مس، قلع، آهن و منگنز"، ششمین همایش علمی دانشجویی مهندسی مواد و متالورژی، 1385
|
|
سحر ملازاده بیدختی، جعفر جوادپور، علیرضا خاوندی، حمیدرضا رضائی، " بررسی خصوصیات نانوپودرهای هیدروکسی آپاتیت تهیه شده به روش In-situ در زمینه پلیمری پلی وینیل الکل "، دهمین کنگره متالورژی، 1385
|
|
سحر ملازاده بیدختی، جعفر جوادپور، علیرضا خاوندی، حمیدرضا رضائی، " سنتز در جا و بررسی خصوصیات فیزیکی نانوذرات هیدروکسی آپاتیت تهیه شده در بستر پلیمری پلی وینیل الکل "، سیزدهمین کنفرانس مهندسی پزشکی ایران، دانشگاه صنعتی شریف، 1385
|
|
خضرآبادی، جوادپور، رضائی، نقی زاده، میرحسینی، "بررسی مکانیزم های کاهش اکسیداسیون در دیرگدازهای آلومینا-گرافیتی در حضور افزودنی های مختلف"، سمپوزیوم فولاد، اصفهان، 1384
|
|
محسن خضرآبادی، جعفر جوادپور، حمیدرضا رضائی، رحیم نقی زاده، نادر خلیلی، "اثر افزودن آ آلومینیوم بر خواص و ریزساختار دیرگدازهای آلومینا-گرافیتی"، سمپوزیوم فولاد، 1382
|
|
علی صابری، فرهاد گلستانی فرد، حمیدرضا رضائی، امیرعباس نوربخش، فرزین آریان پور، "بررسی اثر افزودن الیاف فولادی 430 بر بدنه دیرگدازهای منیزیا-گرافیت مصرفی در ریخته گری مداوم فولاد"، هفتمین کنگره سالیانه انجمن مهندسین متالورژی ایران، دانشگاه صنعتی شریف، 1382
|
|
قراردادهای صنعتی در دست اجرا
|
|
ردیف
|
عنوان قرارداد
|
طرف قرارداد
|
سال شروع
|
|
1
|
بررسی جرمهای سیلیسی تولیدی در ایران از نظر استانداردهای مختلف
|
موسسه استاندارد و تحقیقات صنعتی ایران
|
86
|
| 2 |
بررسی و بهینه سازی روشهای مختلف سنتز نانوتیالیت و تثبیت آن
|
وزارت علوم، تحقیقات و فناوری
|
86
|
|
جوایز و افتخارات
|
|
عنوان
|
سازمان اعطاء کننده
|
سال
|
|
تهیه نانو ذرات تیتانات آلومینیم به روش سل-ژل در دمای پایین،1386
|
اداره کل ثبت شرکتها و مالکیت صنعتی
|
86
|
|
