" Dr Mohammad Saidi-Mehrabad"

Professor

Department: Industrial Engineering

Email : mehrabad AT iust.ac.ir

Tel: +98-21-73225025

Education and qualifications

• University Degrees

· Ph.D. , Industrial Engineering, West Virginia University, USA, 1992

· M.S., Industrial Engineering, University of Arkanasa, USA, 1986.

· B.S., Mechanical Engineering, Oklahoma State University, USA, 1983.

•Sellected Short Course Certificates

Employment

1- Nov. 2009- Present , Professor, Iran University of Science and Technology Manufacturing and Industrial Engineering Dept., Tehran, Iran.

2- 2003- 2009, Associate Professor, Iran University of Science and Technology , Manufacturing and Industrial Engineering Dept.,Tehran, Iran

3- Aug. 2002-Aug. 2003, Visiting Professor, University de Moncton, Industrial engineering The Manufacturing Technology Center, Moncton, New Brunswick, Canada

4- July 1999- 2002, Associate Professor, Iran University of Science and Technology Manufacturing and Industrial Engineering Dept., Tehran, Iran

5- Aug. 1999- Aug. 2002, Assistant Dean and Graduate Coordinator, Iran University of Science and Technology, Manufacturing and Industrial Engineering Dept., Tehran, Iran

6- Nov. 1992- July 1999, Assistant Professor, Iran University of Science and Technology, Manufacturing and Industrial Engineering Dept., Tehran, Iran

7- Aug. 1990-May 1992, Instructor, College of Engineering, Industrial Engineering Department, West Virginia University, USA

8- Jan. 1988-Aug. 1990,Graduate Research Assistant, College of Engineering-

9- Graduate Research Assistant, Industrial Engineering Department-Concurrent Engineering (DICE) project, West Virginia University, USA

10- Oct. 1987- Dec. 1988, Graduate Research Assistant, College of Engineering-

11-Graduate Research Assistant, Agricultural Department-U.S. Forest Service, Morgantown, West Virginia University, USA

12- May 1983-Aug. 1985, Research Assistant, Stillwater Municipal Airport Research Laboratory, Stillwater Oklahoma, USA

Scholarly Research Activities

· Manufacturing processes data analysis and decision marking.

· Application of operations research tools to formulate industry problems.

· Detailed study using quantitative decision making on systems performance and recommendation of optimal performance conditions.

· Economic analysis on life cycle cost modeling and cost optimization.

· New product manufacturing and development process study for minimal development and performance cost.

· Risk analysis in respiratory equipment performance.

· Studding and modeling automatic material handling systems.

· studding the reliability of the automatic material handling systems.

· Issues related to health management.

· Flexible manufacturing systems design and optimal performance analysis.

Research Publications in Fully Referred Journals (ISI, ISC)

Note: Graduate student names are underlined (where applicable)

· Azadeh Noktehdan, Seyedmohammad Seyedhosseini, Mohammad Saidi-Mehrabad (2016). A Metaheuristic algorithm for the manufacturing cell formation problem based on grouping efficacy. Journal of Advanced Manufacturing Technology, Vol. 82, pp. 25-37.

· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Methodologies to optimize automated guided vehicle scheduling and routing problems: A review study. Journal of Intelligent & Robotic Systems, Vol. 77, No. 3, pp. 525-545.

· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Optimizing Multi-objective decision making having qualitative evaluation. Journal of Industrial and Management Optimization, Vol. 11, No. 3, pp. 747-762.

·Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2015). Optimal path in an intelligent AGV-based manufacturing system. Transportation Letters: The International Journal of Transportation Research , Vol. 7, No. 4, pp. 219-228.

· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad, Jaydeep Balakrishana (2015). Integrated Markov-neural reliability computation method:A case for multiple automated guided vehicle system. Journal of Reliability Engineering and System Safety, Vol. 135, pp. 34-44.

· Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2015). Revised multi-choice programming for integrated supply chain design and dynamic virtual cell formation with fuzzy parameters. International Journal of Computer Integrated Manufacturing, Vol. 28, No. 3, pp. 251-265.

· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2014). Delay Optimization in a Multiple AGV System. International Journal of Swarm Intelligence and Evolutionary Computation, Vol. 3, No. 1.

· Amin Aalaei, Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2014). Data envelopment analysis in cellular manufacturing systems considering worker assignment. International Journal of Services and Operations Management, Vol. 18, No. 3, pp. 258-280.

· Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2014). A robust optimisation model for generalised cell formation problem considering machine layout and supplier selection. International Journal of Computer Integrated Manufacturing, Vol. 27, No. 8, pp. 772-786.

· Gerami F., Mohammad Saidi-Mehrabad (2014). Allocation of patients to operating rooms under uncertainty. International Journal of Current life Science, Vol. 4, Issue 9, pp.7121-7127.

· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2013). Markovian reliability in multiple AGV system. Journal of Encyclopedia of Bussiness Analysis and Optimization. pp. 388-395.

· Hamed Fazlollahtabar, Mohammad Saidi-Mehrabad (2013). Optimising a multi-objective reliability assassment in multiple AGV manufacturing system. International Journal of Services an Operations Management, Vol. 16, No. 3, pp. 352-372.

· S. H. Rahmati, A. Kazemi, Mohammad Saidi-Mehrabad (2013). A new fuzzy method for assessing six sigma measures. Journal of Optimization in Industrial Engineering, Vol. 13, pp. 39-47.

· Mohammad Saidi-Mehrabad, Mohammad Mahdi Paydar (2013). Production planning and workers training in dynamic manufacturing systems. Journal of Manufacturing Systems, Vol. 32, pp. 308-314.

· Reza Ramezanian, Mohammad Saidi-Mehrabad, P. Fattahi (2013). MIP formulation and heuristics for multi-stage capacitated lot-sizing and scheduling problem with availability constraints. Journal of Manufacturing Systems, Vol. 32 pp. 392-401.

· Mohammad Mahdi Paydar, Mohammad Saidi-Mehrabad (2013). A hybrid genetic-variable neighborhood search algorithm for the cell formation problem based on grouping efficacy. Computer & Operational Research, Vol. 34, No. 4, pp. 980-990.

· Reza Ramezanian, Saidi-Mehrabad, M. (2013). A mathematical model for Lot-sizing and schedualing problem in capacitated flow shop environments. International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1, pp. 347-361.

· Reza Ramezanian, Mohammad Saidi-Mehrabad (2013). Hybrid simulated annealing and MIP-based heuristics for stochastic lot-sizing and scheduling problem in capacitated multi-stage production system. Applied Mathematical Modelling, Vol. 37, No. 7, pp. 5134-5147.

· Reza Ramezanian, Mohammad Saidi-Mehrabad (2013). Integrating lot-sizing and scheduling with overlapping for multi-level capacitated production system. International Journal of Computer Integrated Manufacturing, Vol. 26, No. 7.

· Reza Ramezanian, Saidi-Mehrabad, M. (2012). Capacitated production planning problem considering the detailed scheduling constraints in a Flow Shop environment. International Journal of Management Science and Engineering Management, Vol. 7, No. 4, pp. 293-302.

· Reza Ramezanian, Mohammad Saidi-Mehrabad (2012). Multi-product unrelated parallel machines scheduling problem with rework processes. Vol. 19, No. 6, pp. 1887-1893.

· Mohammad, Saidi Mehrabad, Mona Anvari (2012). Estimating efficient value of controllable variable using an adaptive neural network algorithm: Case of a railway system. Journal of Scientific & industrial Research. Vol. 71, pp. 45-50.

· Ghezavati, V.R., Mohammad Saidi-Mehrabad (2011). Optimizing expected holding cost in cellular manufacturing systems with stochastic extensions. Journal of Engineering Manufacture, Vol. 225, Issue 6 pp. 943-958.

· Ghezavati, V. R., Mohammad Saidi-Mehrabad, (2011). An efficient linearization technique for mixed 0 1 polynomial problem. Journal of Computational and Applied Mathematics, Vol. 235, Issue 6, pp. 1730-1738.

· Mohammad Saidi-Mehrabad, S.M. Mirnezami (2011). Developing a multi-objective mathematical model for dynamic cellular manufacturing systems. Journal of Optimization in Industrial Engineering, Vol. 7 pp. 1-9.

· Ramezanian, R., Mohammad Saidi-Mehrabad (2011). Flow shop scheduling problem with missing operations: Genetic Algorithm and Tabu Search. International Journal of Applied Operational Research. Vol. 1, No. 2, pp. 21-30.

· Mohammad Saidi Mehrabad, Mona Anvari (2011). Targeting performance measures based on performance. International Journal of Productivity and Performance Management. Vol. 61 Iss: 1 pp. 46-68.

· Ghezavati, V. R., Mohammad Saidi-Mehrabad (2011). An Efficient Self-learning Method for Stochastic cellular manufacturing problem: A Queuing-based analysis. Expert System With Applications. Vol. 38, Issue 3, pp. 1326-1335.

· K., Sabri, Mohammad Saidi-Mehrabad (2011). Optimization models for a deteriorating single server queuing production system. International Jounal of Industrial Engineering & Production Research. Vol. 22, Issue 4, pp. 251-260.

· Ali Pahlavani, Mohammad Saidi-Mehrabad (2011). A competitive facility location model with elastic demand and patronising behaviour sensitive to location, Price and Waiting Time, International Journal of Logistics Systems and Management. Vol., 10 issue 3, pp. 293-312.

· Shafiee, M., Mohammad Saidi-Mehrabad (2011). Two-dimensional warranty cost analysis of second-hand products. Journal of Communications in Statistics: Theory and Methods. Vol. 40, No. 4, pp.684-701.

· Shafiee, M., Mohammad Saidi-Mehrabad (2010). Developing a trade-off between upgrade action time and warranty length for second-hand electrical components. International Journal of Production Development. Vol. 12, Issue 3-4, pp. 336-351.

· Ghezavati, V. R., Mohammad Saidi-Mehrabad (2010). Designing integrated cellular manufacturing systems with scheduling considering stochastic processing time. International Journal of Advanced Manufacturing Technology. Vol. 48, Issue 5-8, pp. 701-717.

· Mona Anvari, Mohammad Saidi-Mehrabad, Azadeh (2010). Performance assessment of decision-making units an adaptive neural network algorithm: One Period Case. International Journal of Advanced Manufacturing Technology. Vol. 45, Issue 9-12, pp. 1059-1069.

· Mohammad Saidi-Mehrabad, Mona Anvari (2010). Provident decision making by considering dynamic and fuzzy environment for FMS evaluation. International Journal of Production Research. Vol. 48, Issue 15, pp. 4555-4584.

· Mohammad Saidi-mehrabad, Noorossana, R., Shafiee, M. (2010). Modeling and analysis of effective ways for improving the reliability of second-hand products sold with warranty. International Journal of Advanced Manufacturing Technology. Vol. 46, Issue 1-4, pp. 253-265.

· Ali Pahlavani, Mohammad Saidi-Mehrabad (2010). Optimal pricing for competitive service facilities with balking and veering customers. International Journal of Innovative Computing, Information and Control. Vol. 7, Issue 6, pp. 3171-3191.

· Mohammad Saidi-Mehrabad, E., Teimory, Ali Pahlavani (2010). Modeling customer reactions to congestion in competitive service facilities. Journal of Service Science and Management. Vol.3, Issue 2, pp. 186-197.

· Ali Pahlavani, Mohammad Saidi Mehrabad (2010). A Fuzzy Multi-objective programming for optimization of hierarchical service centre locations. Journal of Uncertain Systems. Vol. 5, No. 3, pp. 202-226.

· Mona Anvari, Mohammad Saidi-Mehrabad (2010). Machine-part cell formation using a hybrid particle swarm optimization. International Journal of Advanced Manufacturing Technology, under press. Internationa Journal of Advanced Manufacturing Technology Vol. 47, Issue 5-8, pp. 745-754.

· M., Shafiee, Mohammad Saidi-Mehrabad (2010). Warranty and sustainable improvement of used products through remanufacturing. International journal of Product Lifecycle Management. Vol. 4, No. 1-3, pp. 68-83.

· Ghezavati, V. R., Mohammad Saidi-Mehrabad (2009). Designing cellular manufacturing system under uncertainty. Journal of Uncertain Systems. Vol. 3, Issue 4, pp. 315-320.

· Mohammad Saidi-Mehrabad, Ali Pahlavani (2009). Fuzzy multi-objective programming for scheduling of weighted jobs on a single machine. International Journal of Advanced Manufacturing Technology. Vol. 45, Issue 1-2, pp. 122-139.

· Rezazadeh, Mohammad Saidi-Mehrabad (2009). An extended discrete particle swarm optimization algorithm for the dynamic facility layout problem. Journal of Zhejiang University Science, 10A (4), 520-529.

· Najmi, Ehsani, Mohammad Saidi-Mehrabad (2009). Developing an integrated dynamic model for evaluating the performance of research projects based on multiple attribute utility theory. Journal of Modeling in Management, Vol.4, Issue 2.

· Ghezavati, Mohammad Saidi-Mehrabad (2009). A robust approach to location-allocation problem under uncertainty. Journal of Uncertain systems, Vol. 3, Issue 2, pp.131-136.

· Mohammad Saidi-Mehrabad, Rezai (2008). A new method to fuzzy modeling and its application in performance evaluation of tenants in incubtors. International Journal of Advanced Manufacturing Technology. Vol. 37 Issue 1-2.

· Safai, N., Mohammad Saidi-Mehrabad (2008). A hybird simulated annealing for solving an extended model of dynamic cellular manufacturing system. European Journal of Operational Research. Vol. 185, Issue 2, pp. 563-592.

· Mohammad Saidi-Mehrabad, Safai, N. (2008). A fuzzy programming approach to a cell formation problem with dynamia and uncertain conditions. Journal of Fuzzy and Sets Systems, Vol. 159, pp. 215-236.

· Mohammad Saidi-Mehrabad, Safai, N. (2007). Desiging cellular manufacturing systems under dynamic and uncertaintiy condition. Journal of Intelligent Manufacturing Engineering. Vol. 18, pp. 383-399.

· Mohammad Saidi-Mehrabad, Fatahi, P. (2007). Flexible job shop scheduling with Tabu Search. International Journal of Advanced Manufacturing Technology. Vol. 32 , Issue 5-6.

· Arkat, J., Mohammad Saidi-Mehrabad (2007). Applying simulated annealing to celluar manufacturing systems. International Journal of Advanced Manufacturing Technology. Vol. 32, Issue 5-6.

· Mohammad Saidi-Mehrabad, Fathian, M. (2007). Developing an expert system for job selection. International Journal of Computer and Industrial Engineering. Vol. 53, Issue 2, pp. 306-312.

· Mohammad Saidi-Mehrabad, Fattahi, M. (2007). Mathematical modeling and heuristic approaches to flexible job shop scheduling problems. Journal of Intelligent Manufacturing, Vol.18, Issue 3, pp. 331-342.

· Safai, N., Mohammad Saidi-Mehrabad (2007). A new model of dynamic cell formation by a neural approach. International Journal of Advanced Manufacturing Technology. Vol. 33, pp. 1001-1009.

· Fattahi, P., Mohammad Saidi-Mehrabad, Aryanezhad (2006). An algorithm for multi-objective job shop scheduling problem. International Journal of Industrial Engineering, Vol. 2-3, pp. 43-53.

· Mohammad Said-Mehrabad, Fathian, M. (2003). An effective model for intelligent employee selection in human resource management. Journal of Humanities, Vol. 10.

· Mohammad Saidi-Mehrabad, Fathian (2002). Job Applicants Selection Process Model. Internation Journal of Engineering Science IUST. Vol. 12, Issue 2, pp. 138-149.

· Mohammad Saidi-Mehrabad (2001). Application of Statistical Model for Machine Delay Analysis. International Journal of Engineering. Vol. 15, Issue 2, pp. 4-12.

· Mohammad Saidi-Mehrabad (2000) Economic Analysis of Implementing Flexible Manufacturing Systems in a Manufacturing Environment. International Journal of Engineering. Vol. 12 Issue 3, pp. 21-32.

· Mohammad Saidi-Mehrabad (1998). Turbine Blade Investment Casting Cost Estimation Model. International Journal of Engineering. Vol. 12, Issue 4, pp. 28-38

« Google Scholar Link »

Conference Attendance

· A. Khiali, Mohammad Saidi-Mehrabad, A gravitational search algorithm and an improved mathematical model for solving cell formation problem with consideration of system reliability. Tenth International Industrial Engineering Conference, 27-28 January, 2014.

· Mohammad Saidi-Mehrabad, B. Rahimi,Classifying workstations in tandem automated guided vehicle system by balancing strategy with variable neighborhood search. Tenth International Industrial Engineering Conference, 27-28 January, 2014.

· Ragheb Rahmaniani, Mohammad Saidi Mehrabad, Minimizing the transportation cost of delivery companies with uncertain demands and edge length. The 8^th International Industrial Engineering Conference, Feb., 10-12, 2012.

· M. M. Paydar, Mohammad Saidi-Mehrabad, A robust optimization model for generalized cell formation problem considering machine layout. CIE 42Proceeding, 15-18 July 2012, Cape Town, South Africa.

· Mohammad Saidi-Mehrabad, S. Zarghami, Flexible manufacturing system planning with increasing the reliability approach. 9^th International Conference in Industrial Engineering, 1-2 December 2012.

· Mohammad Saidi-Mehrabad, M., Anvari, Decision support system for planning future performance improvement. ASAC 2011, Montreal, Quebec, Canada.

· Reza Ramezanian, Mohammad Saidi Mehrabad, A mixed integer linear programming model for integrated scheduling and maintenance problem. 4^th International Conferences of Operations Research Society, May 18-19, 2011.

· M., M. Paydar, Mohammad Saidi Mehrabad, Developing a mathematical model for cell formation problem based on grouping efficacy. 4^th International Conference of Operations Research Society, May18-19, 2011.

· Reza Ramezanian, Mohammad Saidi Mehrabad, A novel mathematical programming model for a posteriori electre TRI method. 4^th International Conference of Operations Research Society, May 18-19, 2011.

· M. M. Paydar, Mohammad Saidi-Mehrabad, Designing a mathematical model for dynamic cellular manufacturing systems with route selection and purchasing machines. Proceeding of ICIEBM 2010, Yogyakarta-Indonessa.

· Mohammad Saidi-Mehrabad, M., Anvari, A framework for targeting performance measures based on desired improvement and performance prediction. ASAC 2010, 22-25 May 2010, Regina, SK, Canada.

· Mohammad Saidi-Mehrabad, R., Ramezanian, Non-permutation flow shop scheduling problems with uncertain parameters. 7^th International Industrial Engineering Conference, 6-7 October 2010.

· M., Mahdi Paydar, Mohammad Saidi-Mehrabad, Designing a mathematical model for dynamic cellular, manufacturing systems with route selection and purchasing machines. The International Conference on Industrial Engineering and Business Management 2010.

· Mohammad Saidi-Mehrabad, Zarrringhalami M., studying the existing methodologies for country risk rating and developing a new model. Proceeding of the 37^th International Conference on Computer and Inustrial Engineering, October 20-23, 2007, Alexandria, Egypt.

· Mohammad Saidi-Mehrabad, Cost-optimal experimental design for manufacturing parameters selection. Proceeding of the 36^th CIE Conference on Computers and Industrial Engineering, June 20-23, 2006, Taipei, Taiwan.

· Mohammad Saidi-Mehrabad, Fattahi, P., Ramezani, S., Job shop scheduling with lot-sizing consideration. Proceeding of the 36^th CIE Conference on Computers and Industrial Engineering, June 20-23, 2006, Taipei, Taiwan.

· Mohammad Saidi-Mehrabad, Safaei, N., Tavakkoli, A fuzzy parametric programming for cell formation problems in uncertain and dynamic conditions. Proceeding of the 36^th CIE Conference on Computers and Industrial Engineering, June 20-23, 2006, Taipei, Taiwan.

· Safaei, N., Javadian, Mohammad Saidi-Mehrabad, A fuzzy goal programming based approach to solve a dynamic cell formation problem. Proceeding of the 36^th CIE Conference on Computers and Industrial Engineering, June 20-23, 2006, Taipei, Taiwan.

· Mohammad Saidi-Mehrabad, Evaluating of reverse engineering performance accuracy. Proceeding of the 35^th International Conference on Computers & Industrial Engineering, Istanbul Hilton, Turkey, June 19-22, 2005.

· Safai, N., Mohammad Saidi-Mehrabad, A new generalized cell formation model in uncertainty and dynamic conditions by assuming routing flexibility and machine relocation. Proceeding of the 35^th International Conference on Computers & Industrial Engineering, Istanbul Hilton, Turkey, June 19-22, 2005.

· Mohammad Saidi-Mehrabad, Fatahi, P., An algorithm for flexible job shop scheduling with sequence dependent setups. Proceeding Of The 35^th International Conference On Computers & Industrial Engineering, Istanbul Hilton, Turkey, June 19-22, 2005.

· Mohammad Saidi-Mehrabad, Fathian, M. Applying case–based reasoning model for employee selection. Proceeding Of The 31^st International Conference On Computers And Industrial Engineering, San Francisco, February 2-4, 2003.

· Mohammad Saidi-Mehrabad, Fathian, M. Using MDS technique for knowledge acquistion: An effective model for intelligent employee selection. Proceedings, Of The 30^th Internatioal Conference On Computers & Industrial Engineering, Tinos Island, Greece, June 28- July 2, 2002.

· Mohammad Saidi-Mehrabad, Studying machinability characteristics of the selected material. Proceedings, Of The 30^th International Conference On Computers & Industrial Engineering, Tinos Island, Greece, June 28- July 2, 2002.

· Mohammad Saidi-Mehrabad, A quality control policy on investigating of bronze art work Coating. Proceedings, The 5^th International Conference On Reliability, Maintainability And Safety, Dalian, China 28-31, August, 2001.

· Mohammad Saidi-Mehrabad, Application of statistical model to the machine delays analysis. Proceedings, The 4^th International Conference On Engineering Design And Automation, Florida, July 30-August 2, 2000, USA.

· Mohammad Saidi-Mehrabad, A knowledge based expert systems approach to the gear production process in concurrent engineering environment. Proceedings, The 27^th International Conference On Computers & Industrial Engineering, October 11 To 13, 2000, Beijing, China.

· Mohammad Saidi-Mehrabad, Flexible manufacturing system cost optimal quality control policy. Proceedings, The 26^th International Conference On Computers And Industrial Engineering, 15-17 December 1999, Melbourne, Australia.

· Mohammad Saidi-Mehrabad, Computer aided feature-based manufacturing cost estimation. Proceedings, International Conference On Manufacturing Automation (ICMA’97), The University Of Hong Kong, May 1997.

· Mohammad Saidi-Mehrabad, A risk model development for manufacturing environment contaminant caused injury. Proceedings, The Third Vietnam Conference On Automation, April 9-11, 1998, Hanoi, Vietnam.

· Mohammad Saidi-Mehrabad, Application of linear programming techniques for modeling least cost manufacturing operation. Proceedings, International Conference Swedish Operations Research Association, 1-3 October 1996, Luled Sweden.

· Mohammad Saidi-Mehrabad, Economic analysis of implementing respirator, program or ventilation system in a manufacturing environment. Proceedings, The 6^th International Conference On Manufacturing Engineering, 29 Nov-1 Dec. 1995, Melbourne Australia.

· Mohammad Saidi-Mehrabad, Effect of computer aided coding And classification in process planning. Proceedings, The 4^th National Symposium On Concurrent Engineering, June 1-5, 1992, Washington, DC, USA.

Awards And Scholarships

1- Aug.1990, Based on Relative work experience and Performance, Awarded the American association of cost engineering scholarship.

2- January 2008, Based on publication of research work in science indexed journals recognized as an outstanding researcher of the year 2009 in industrial Engineering Department.

3- January 2015, Based on the publication of research articles in science indexed journals recognized as an outstanding researcher of the year 2015 in industrial engineering Department.

4- January 2015, Based on the internationally recognized, scientific activity, recognized as an outstanding international relation at the university level.

Books

Authors:H. Fazlollahtabar, Mohammad Saidi-mehrabad,’Autonomous Guided Vehicles’,publisher:Springer, series:Studies in systems, Decision and Control, ISBN 978-3-319-14746-8, EBook, ISBN 978-3-319-14747-5, Springer Cham Heidelberg New York Dordrecht London, (2015).

Authors :Mohammad Saidi-Mehrabad, M. Paydar ‘Designing of cellular manufacturing systems’,ISBN :987-964-10-2690-7, Published by Islamic Azad University of Qazvin, (2014).

Book translated to persian : ‘Robats and Manufacturing Automation’, ISBN :978-600-5749-81-9, Published by Green publication thoughts,Amol, (2013)

Book translated to persian : ‘Set-up time reduction ‘, ISBN :964-330-852-9, published by Iran Khodro education and traning center,Tehran, (2008).

Book, ‘High Technology Parks, ISBN :964-454-142-1, published by Iran University of Science and Technology,(2007).

Book chapters

H. Fazlollahtabar, Mohammad Saidi-Mehrabad « Markovian Reliability in Multiple AGV System », book chapter,Book : Encyclopedia of Business Analytics and Optimization, IGI Global, 2014.

V. Gezavati, Mohammad Saidi-Mehrabad, « Optimization and mathematical programming to design and planning issues in cellular manufacturing systems under uncertain situation », book chapter, Book : Operations Management Research and Cellular Manufacturing Systems : Innovative Methods and Approaches, IGI Global, 2013.

Previously-supervised Ph.D. Student

· Sept. 2011- 2015, Hamed Fazlollahtabar

Research area: Determining optimal routes in multiple automated guided vehicle network

Current position:Assistant professor at Babol Science and Technology University

· Sept. 2010-2014, Mohammad Mahdi Paydar

Research area: Designing a comprehensive model for supply chain and cellular manufacturing systems under uncertainty

Current position: Assistant professor at Noshiravan University of Technology, Babol.

· Sept. 2009-2013, Reza Ramezanian

Research area: Integrated lot-sizing and scheduling in capacitated multi-stage production system

Current position: Assistant Professor at K.N. Toosi University of Technology

· Sept. 2008-2011, Mona Anvari

Research area:Performance prediction model applicable for continuouse production systems

Current position: Sinior researcher at the National Oil Company

· Sept. 2007-2011, Ali Pahlavani

Research area: Designing competitive service system under uncertainty

Current position: Consultant at the Tejarat Bank

· Sept. 2006-2010, Vahidreza Ghezavati

Research area:Developing of cellular manufacturing models under uncertain situations

Current position:Assistant professor at Tehran University PardisII

· Sept. 2006- April 2010, Mahmood Shafiee

Reseach area:Developing a price-quality approach to determine the optimal price and warranty length for second-hand products

Current position: Assistant professor at the Cranfield Univerity, UK.

· Sept. 2002- November 2006, Parviz Fattahi

Reseach area: Multi-objective flexible job shop scheduling with demand considerations

Current position: Associate professor at the Bu-Ali Sina Universoty

· Sept. 2002- November 2006, Nima Safaei

Research area: Designing a Generalized cellular manufacturing system in dynamic and fuzzy environment by a neural approach

Current position: Senior Maintenance &Reliability specialist at Bombardier Aerospace Inc. Toronto Canada

· Sept. 2001-2005, Rahim Ehsani

Research area: Designing an integrated dynamic model for evaluating the performance of research centers

Current position: Head of transportation research center, Tehran.

· Sept. 1999-2003, Mohammad Fathian

Research area: Designing a model for selecting job applicant…

Current position: Professor at Iran University of Science and Technology

"Back to Faculty List"