|
Publications
|
| Tavakkoli, H. , Aboutalebi, M.R. , Seyedein, S.H. , Ashrafizadeh, S.N., " The impact of acidic media on the synergistic solvent extraction of Sm and Lu by mixture of organophosphorus extractants", Journal of Solution Chemistrythis link is disabled, 2022, 51(12), pp. 1571–1588 |
| Vafaeenezhad, H. , Aliakbari-Sani, S. , Seyedein, S.H. , Ghosh, A. , Eivani, A.R., " Flow behavior and strain rate sensitivity assessment of γand γ' phases in Co-Al-W-based superalloy using experimental and computational approaches", Journal of Materials Research and Technology, 2022, 18, pp. 4617–4630 |
| Rajabi, M. , Vafaeenezhad, H. , Aboutalebi, M.R. , Seyedein, S.H., " Thick thermal barrier coatings with different segmentation crack densities: Microstructure analysis and thermal oxidation behavior", Ceramics Internationalthis link is disabled, 2022 |
| Rajabi, M. , Aboutalebi, M.R. , Seyedein, S.H. , Ataie, S.A., " Simulation of residual stress in thick thermal barrier coating (TTBC) during thermal shock: A response surface-finite element modeling", Ceramics International, 2022, 48(4), pp. 5299–5311 |
| Khajeh, R. , Jafarian, H.R. , Jabraeili, R. , ... Park, N. , Heidarzadeh, A., " Strength-ductility synergic enhancement in friction stir welded AA2024 alloy and copper joints: Unravelling the role of Zn interlayer's thickness", Journal of Materials Research and Technology, 2022, 16, pp. 251–262 |
| Hakakzadeh, M. , Jafarian, H.R. , Seyedein, S.H. , ... Park, N. , Heidarzadeh, A., " Production of Ti-CNTs surface nanocomposites for biomedical applications by friction stir processing: Microstructure and mechanical properties", Materials Letters, 2021, 300, 130138 |
| Khajeh, R. , Jafarian, H.R. , Seyedein, S.H. , ... Kim, Y. , Heidarzadeh, A., " Microstructure, mechanical and electrical properties of dissimilar friction stir welded 2024 aluminum alloy and copper joints", Journal of Materials Research and Technology, 2021, 14, pp. 1945–1957 |
| Mohammadi, H. , Eivani, A.R. , Seyedein, S.H. , Ghosh, M. , Jafarian, H.R., " An investigation of hot deformation behavior of Zn–22Al alloy and development of its processing maps during isothermal compression", Journal of Materials Research and Technology, 2021, 14, pp. 507–520 |
| Vafaeenezhad, H. , Seyedein, S.H. , Aboutalebi, M.R. , Eivani, A.R., " Numerical Prediction of Ductile Fracture in Sn-5Sb Alloy Hot Deformation Based on Phenomenological Models and Finite Element Analysis", Journal of Materials Engineering and Performance, 2021, 30(8), pp. 5524–5540 |
| Tavakkoli, H. , Aboutalebi, M.R. , Seyedein, S.H. , Asharafizadeh, S.N., " Solvent Extraction of Lutetium from Different Acidic Solutions Using Organophosphorus Extractants", Mining, Metallurgy and Exploration, 2021, 38(3), pp. 1561–1571 |
| H. Abarghooei, H. Arabi, H. seyedein, B. Mirzakhani, "Modelling of hot flow behavior of API-X70 microalloyed steel by genetic algorithm and comparison with experiments", INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021 |
| Vafaeenezhad, H. , Seyedein, S.H. , Aboutalebi, M.R. , Eivani, A.R. , Nikan, O., "Numerical and experimental analysis of creep deformation and stress-relaxation in Sn-5Sb lead-free alloy", Engineering Failure Analysis, 2021, 120, 105075 |
| Vafaeenezhad, H. , Yazdi, A. , Seyedein, S.H. , ... Eivani, A.R. , Hosseinabadi, F., "Micromechanical simulation of plastic deformation behavior and failure commencement in high silicon bainitic steel after austempering", Materials Science and Engineering A, 2021, 799, 140131 |
| Mortezaei, S. , Arabi, H. , Seyedein, S.H. , Momeni, A. , Soltanalinezhad, M., "Investigation on microstructure evoution of a semi-austenitic stainless steel through hot deformation", Iranian Journal of Materials Science and Engineering, 2020, 17(3), pp. 70-79 |
| Ghavimi, A.H. , Aboutalebi, M.R. , Seyedein, S.H., "Exit-hole repairing in friction stir welding of AA5456 pipe using consumable pin", Materials and Manufacturing Processes", 2020, 35(11), pp. 1240-1250 |
| Mohammadi, H. , Eivani, A.R. , Seyedein, S.H. , Ghosh, M., "Modified Monte Carlo approach for simulation of grain growth and ostwald ripening in two-phase Zn-22Al alloy", Journal of Materials Research and Technology, 2020, 9(5), pp. 9620-9631 |
| Chegini, M., Aboutalebi, M.R., Seyedein, S.H., Ebrahimi, G.R., Jahazi, M., "Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map", Journal of Manufacturing Processes, 2020 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Using high temperature tensile testing data to analyze hot formability of Sn-5Sb alloy: instability and critical damage criteria", Journal of Materials Research and Technology, 2020 |
| Nikbakht, R., Seyedein, S.H., Kheirandish, S., Assadi, H., Jodoin, B., "The role of deposition sequence in cold spraying of dissimilar materials", Surface and Coatings Technology, 367, pp. 75-85, 2019 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Hybrid Monte Carlo – Finite element simulation of microstructural evolution during annealing of severely deformed Sn-5Sb alloy", Computational Materials Science, 163, pp. 196-208, 2019 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., Nikan, O., "Creep life prediction for Sn-5Sb lead-free solder alloy: Model and experiment", Mircroelectronic Engineering 207, pp. 55-65, 2019 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Quantitative Assessment of Dynamic Recovery Kinetics in Sn-5Sb Lead-Free Solder Alloy During Hot Working", Journal of Electronic Materials47(11), pp. 6868-6877, 2018 |
| Mirghasemi, S.M., Eivani, A.R., Seyedein, S.H., Jafarian, H.R., "A comparison between routine vs. normalized Cockroft-Latham fracture criteria for prediction of fracture during equal channel angular pressing", Engineering Fracture Mechanics199, pp. 721-729 , 2018 |
|
Nikbakht, R., Seyedein, S.H., Kheirandish, S., Assadi, H., Jodoin, B., "Asymmetrical bonding in cold spraying of dissimilar materials", Applied Surface Science, Volume 444, 30 June 2018, Pages 621-632
|
|
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "An investigation of workability and flow instability of Sn-5Sb lead free solder alloy during hot deformation", Materials Science and Engineering A, Volume 718, 7 March 2018, Pages 87-95
|
Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R. , Eivani, A.R., "Application of constitutive description and integrated ANFIS – ICA analysis to predict hot deformation behavior of Sn-5Sb lead-free solder alloy", Journal of Alloys and Compounds, Volume 697, 15 March 2017, Pages 287-299 |
| Abarghooei, H., Arabi, H., Seyedein, S.H., Mirzakhani, B., "Modeling of steady state hot flow behavior of API-X70 microalloyed steel using genetic algorithm and design of experiments", Applied Soft Computing Journal, Volume 52, 1 March 2017, Pages 471-477 |
| Vafaeenezhad, H. , Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Incorporating the Johnson–Cook Constitutive Model and a Soft Computational Approach for Predicting the High-Temperature Flow Behavior of Sn-5Sb Solder Alloy: A Comparative Study for Processing Map Development", Journal of Electronic Materials, Volume 46, Issue 1, 1 January 2017, Pages 467-477 |
| Adeli, M., Seyedein, S.H., Aboutalebi, M.R., Kobashi, M., Kanetake, N., "Implementation of DSC analysis in reaction kinetics during heating of Ti–50 at.%Al powder mixture", Journal of Thermal Analysis and Calorimetry, 2 December 2016, Pages 1-8 |
| Nayebpashaee, N., Seyedein, S.H., Aboutalebi, M.R., Sarpoolaky, H., Hadavi, S.M.M., "Finite element simulation of residual stress and failure mechanism in plasma sprayed thermal barrier coatings using actual microstructure as the representative volume", Surface and Coatings Technology, Volume 291, April 15, 2016, Pages 103-114 |
| Vafaeenezhad, H.Asadolahpour, S.R., Nayebpashaee, N., Seyedein, S.H., Aboutalebi, M.R., "Intelligent use of data to optimize compressive strength of cellulose-derived composites", Applied Soft Computing Journal, Volume 40, March 2016, Pages 594-602 |
| Valipour, S., Eivani, A.R. , Jafarian, H.R., Seyedein, S.H., Aboutalebi, M.R., "Effect of pre-deformation thermomechanical processing on the development of ultrafine grain structure during equal channel angular extrusion", Materials and DesignVolume 89, January 05, 2016, Pages 377-384 |
| Faraji, A.H., Goodarzi, M., Seyedein, S.H., Maletta, C., "Effects of welding parameters on weld pool characteristics and shape in hybrid laser-TIG welding of AA6082 aluminum alloy: numerical and experimental studies",Welding in the WorldVolume 60, Issue 1, 1 January 2016, Pages 137-151 |
| Bohlouli, A., Afshar, M.R., Aboutalebi, M.R., Seyedein, S.H., "Optimization of tungsten leaching from low manganese wolframite concentrate using Response Surface Methodology (RSM) ", International Journal of Refractory Metals and Hard Materials, Volume 61, 1 December 2016, Pages 107-114 |
| Nayebpashaee, N., Seyedein, S.H., Aboutalebi, M.R., Sarpoolaky, H., Hadavi, M.M., "Modeling the effect of interface characteristics and layer compositional parameters on the residual stress distribution in FG-TBC system: FEM and FIS approach", Journal of Ceramic Processing Research, Volume 17, Issue 8, 2016, Pages 803-814 |
| Faraji, A.H., Goodarzi, M., Seyedein, S.H., Barbieri, G., Maletta, C., "Numerical modeling of heat transfer and fluid flow in hybrid laser–TIG welding of aluminum alloy AA6082", International Journal of Advanced Manufacturing Technology, Volume 77, Issue 9-12, 1 April 2015, Pages 2067-2082 |
| Mohsenifar, A., Aboutalebi, M.R. , Seyedein, S.H., "Effect of high temperature oxidation on the corrosion behavior of aluminized low carbon steel in molten aluminum", Iranian Journal of Materials Science and Engineering, Volume 12, Issue 3, 1 September 2015, Pages 88-94 |
| Mousavi, E. , Aboutalebi, M.R., Seyedein, S.H., Abbasi, S.M., "Influence of carbon on the ageing behaviour of TI-13V-11CR-3AL", Iranian Journal of Materials Science and Engineering, Volume 11, Issue 3, September 2014, Pages 40-47 |
|
M.H. Goodarzy, H. Arabi, M.A. Boutorabi, S.H. Seyedein , H. Shahrokhi, " Dislocations Structure and Scattering Phenomenon in Crystalline Cell Cize of 2024 Al Alloy Deformed by One Pass of ECAP at Room Temperature", Iranian Journal of Materials Science & Engineering, V. 11, no, 1, 27-38, 2014
|
|
M.H. Shaeri, M.T. Salehi, S.H. Seyedein , M.R. Abutalebi, J.K. Park, " Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment", Materials and Design, V. 57, 250-257, 2014
|
|
H. Naffakh Moosavy, M.R. Aboutalebi, S. H. Seyedein , M. Goodarzi and C. Mapelli, " Comparative study on dissimilar welding of Inconel 718 and Udimet 500 precipitation strengthened nickel based superalloys", Journal of Materials Science and Technology, V. 30, no. 3, 339-347, 2014
|
|
H. Vafaeenezhad, S. Ghanei, S.H. Seyedein, H. Beygi, and M. Mazinani, " Process Control Strategies for Dual-Phase Steel Manufacturing Using ANN and ANFIS ", Journal of Materials Engineering and Performance, V. 23, no. 11, 3975-3983, 2014
|
|
Homam Naffakh Moosavy, Mohammad-Reza Aboutalebi, Seyed Hossein Seyedein , Massoud Goodarzi, Meisam Khodabakhshi, Carlo Mapelli, Silvia Barella, " Modern fiber laser beam welding of the newly-designed precipitation-strengthened nickel-base superalloys", Optics & Laser Technology, V. 57, 12-20, 2014
|
|
E. Badami, M. T. Salehi, S. H. Seyedein, "Modeling High Temperature Flow Behaviour of an Al6061 Aluminium Alloy", Iranian Journal of Materials Science & Engineering , V. 11, no. 4, 63-71, 2014
|
|
Amir Hossein Faraji, Massoud Goodarzi, Seyed Hossein Seyedein , Mohammad Hasan Zamani, " Experimental study and numerical modeling of arc and weld pool in stationary GTA welding of pure aluminum", Int. J. Adv. Manuf. Technol, V. 71, 2059-2071, 2014
|
| Mahdi Moshref-Javadi, Majid Belbasi, Seyed Hossein Seyedein, Mohammad Taghi Salehi, " Fabrication of (Ti,Hf)-rich NiTiHf Alloy Using Graphitic Mold and Crucible ", Journal of Materials Science & Technology. 01/2014; 30(3):280–284. |
|
M.H. Goodarzy, H. Arabi, M.A. Boutorabi, S.H. Seyedein , S.H. Hasani Najafabadi, " The effects of room temperature ECAP and subsequent aging on mechanical properties of 2024 Al alloy", Journal of Alloys and Compounds, V. 585, 753-759, 2014
|
|
Amir H. Faraji, A. Bahmani, M. Goodarzi, Seyed H. Seyedein , M. O. Shabani, " Numerical and experimental investigations of weld pool geometry in GTA welding of pure aluminum", J. Cent. South Unive. , V. 21, 20-26, 2014
|
| Mahdi Moshref-Javadi, Seyed Hossein Seyedein, Mohammad Taghi Salehi, Mohammad Reza Aboutalebi, " Age-induced multi-stage transformation in a Ni-rich NiTiHf alloy ", Acta Materialia. 04/2013; 61(7):2583–2594. |
|
Homam Naffakh Moosavy, Mohammad-Reza Aboutalebi, Seyed Hossein Seyedein, Carlo Mapelli, " Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ′′-strenthenednickel-base superalloys", Materials Characterization, V. 82, 41-49, 2013
|
|
Homam Naffakh ,Moosavy, Mohammad-Reza Aboutalebi, Seyed Hossein Seyedein , Carlo Mapelli, " A solidification model for prediction of castability in the precipitation-strengthened nickel-based superalloys", Journal of Materials Processing Technology, V. 213, 1875-1884, 2013
|
|
M. Adeli, S. H. Seyedein, M. R. Aboutalebi, " A Numerical Model for the Combustion Synthesis of Titanium Aluminide in the Self-Propagating Mode", V. 185, no. 1118-1131, Combust. Sci. Technol., 2013
|
|
D. Mohammadi, S. H. Seyedein, M. R. Aboutalebi, " Numerical simulation of thermal stratification and destratification in secondary steelmaking ladle", Ironmaking and Steelmaking, V. 40, 342-349, 2013
|
|
Homam Naffakh Moosavy, Mohammad-Reza Aboutalebi, Seyed Hossein Seyedein, Meisam Khodabakhshi, Carlo Mapelli, " New approach for assessing the weldability of precipitation-strengthened nickel-base superalloys", International Journal of Minerals, Metallurgy and Materials, V. 20, no. 12, 1183-1191, 2013
|
|
M.H. Shaeri, M.T. Salehi, S.H. Seyyedein , M.R. Abutalebi, J.K. Park, " Characterization of microstructure and deformation texture during equal channel Angular pressing of Al-Zn-Mg-Cu alloy", Journal of Alloys and Compounds, V. 576, 350-357, 2013
|
|
P. Samadi, M.R. Afshar, M.R. Aboutalebi, S.H. Seyedein, " An Investigation on the Effect of Electromagnetic Force on the Characteristics of Electrodeposited", Iranian Journal of Materials Science & Engineering, V. 9, no. 1, 21-28, 2012
|
|
S. Mousavi Nasab, M. Aboutalebi, S. H. Seyedein, A. Molavi Kakhki, J. Vahdati Khaki, " Fabrication of Single-Phase NiTi by Combustion Synthesis of Mechanically Activated Powders", Journal of Metallurgy, 1-6, 2012
|
|
M. Malekan, S.G. Shabestari, W. Zhang, S.H. Seyedein, R. Gholamipour, K. Yubuta, A. Makino, A. Inoue, " Formation of bulk metallic glass in situ nanocomposite in (Cu50Zr43Al7)99Si1a", Materials Science and Engineering A , V. 553, 10-13, 2012
|
|
Homam Naffakh Moosavy, Mohammad-Reza Aboutalebi, Seyed Hossein Seyedein, " An analytical algorithm to predict weldability of precipitation-strengthened nickel-base superalloys", Journal of Materials Processing Technology, V. 212, 2210-2218, 2012
|
| Mahdi Moshref Javadi, Majid Belbasi, Mohammad T. Salehi, M. Reza Afshar, " Effect of Aging on the Microstructure and Shape Memory Effect of a Hot-Rolled NiTiHf Alloy ", Journal of Materials Engineering and Performance 01/2011; 20:618-622. · 0.92 Impact Factor |
|
A. Jafari, S. H. Seyedein, M. R. Aboutalebi, " Semi-implicit method for thermodynamically linked equations in phase change problems -SIMTLE", Applied Mathematical Modelling, V. 35, 4774-4789, 2011
|
|
H. Barati, S. G. Shabestari, M. R. Aboutalebi, S. H. Seyedein, " Investigation on dendritic solidification and microsegregation in presence of melt convection using phase field simulation", Canadian Metallurgical Quarterly, V. 50, no. 4, 408-415, 2011
|
| A. Jafari, S. H. Seyedein, M. R. Aboutalebi, " Mathematical Modeling of Transport Processes in Funnel Shaped Mold of Steel Thin Slab Continuous Caster", Journal of Heat Transfer, V. 133, no. 6, 2011 |
| Arash Inanlou, S. Hossein Seyedein, M. Reza Aboutalebi, “The Effect of Semi-solid Parameters on the Microstructure and Hardness of high Chromium Cast Irons”, Key Engineering Materials Vol. 457 (2011) pp 84-89 |
|
S. Ghafurian, S.H. Seyedein, M.R. Aboutalebi, M. Reza Afshar, " Numerical Modeling of the Combustion Synthesis of TiAl-Al2O3 Composite via Microwave Heating ", Iranian Journal of Materials Science & Engineering, V. 8, no. 3, 8-16, 2011
|
|
A.H. Meysami, R. Ghasemzadeh, S. H. Seyedein, M. R. Aboutalebi, " Effect of External Forced Flow and Boiling Film on Heat Transfer of AISI 4140 Steel Horizontal Rod During Direct Quenching", Journal of Iron and Steel Research, Internation, V. 18, no. 10, 34-41, 2011
|
|
M. Mohebi Moghadam, S. H. Seyedein, M. R. Aboutalebi, “Fluid Flow and Heat Transfer Modeling of AC Arc in Ferrosilicon Submerged Arc Furnace”, Journal of Iron and Steel Research, International, 2010, 17(9): 14-18
|
| M. Malekan, S.G. Shabestari, W. Zhang, S.H. Seyedein, R. Gholamipour, A. Makinoc, A. Inoue, “Effect of Si addition on glass-forming ability and mechanical properties of Cu–Zr–Al bulk metallic glass”, Materials Science and Engineering A 527 (2010) 7192–7196 |
|
M. Adeli, M. Shekari, S. H. Seyedein and M. R. Aboutalebi, “NUMERICAL SIMULATION OF COMBUSTION SYNTHESIS OF ALUMINIDE INTERMETALLIC COMPOUNDS”, Iranian Journal of Materials Science & Engineering Vol. 7, Number 2, Spring 2010.
|
|
A. Jafari, S. H. Seyedein, M. R. Aboutalebi, D. G. Eskin and L. Katgerman, “NUMERICAL MODELING OF MACROSEGREGATION DURING THE DIRECT-CHILL CASTING OFAN ALALLOY BILLET”, Iranian Journal of Materials Science & Engineering Vol. 7, Number 3, Summer 2010
|
| A.H. Meysami, R. Ghasemzadeh, S.H. seyedein, M.R. Aboutalebi, “An investigation on the microstructure and mechanical properties of direct-quenched and tempered AISI 4140 steel”, Materials and Design 31 (2010) 1570–1575 |
|
M. Adeli, S.H. seyedein, M.R. Aboutalebi, M. Kobashi, N. Kanetake, "A study on the combustion synthesis of titanium aluminide in the self-propagating mode", Journal of Alloys and Compounds, 497 (2010) 100-104
|
|
A.H. Meysami, R. Ghasemzadeh, S. H. Seyedein , M. R. Aboutalebi, " An investigation on the microstructure and mechanical properties of direct-quenched and tempered AISI 4140 steel", Materials and Design, V. 31, 1570-1575, 2010
|
|
B. Mirzakhani, M.T. Salehi, S. Khoddam, S.H. Seyedein, M.R. Aboutalebi, "Investigation of Dynamic and Static recrystallization behavior during thermomechanical processing in a API-X70 microalloyed steel", Journal of Materials Engineering and Performance, 2009. DOI: 10.1007/s11665-009-9387-9
|
| M. Malekan, S.G. Shabestari, R. Gholamipour, S.H. Seyedein, “Effect of Ge addition on mechanical properties and fracture behavior of Cu-Zr-Al bulk metallic glass “, Journal of Alloys and Compounds 484 (1-2), 2009, pp. 708-711 |
| H.Arabi, S.H. Seyedein, A. Mehryab, B.Tolaminejad, "Mathematical Modeling and Simulation of the Interface Region of a Tri-Layer Composite Material, Brass/Steel/Brass, Produced by Cold Rolling", International Journal of Mineral, Metallurgy and Materials, 16(2) (2009), pp. 189-196 |
|
A.H. Meysami, R. Ghademzadeh, S.H. Seyedein, M.R. Aboutalebi, R. Ebrahimi, M. Javidani, "The physical simulation of hot deformation, and microstructural evolution for 42CrMo4 steel prior to direct quenching", Journal of Iron and Steel Research, International, 16 (2009) 47-51.
|
| S. Kianfar, S.H. Seyedein, M.R. Aboutalebi, "Heat transfer and solidification analysis in the mould region of a horizontal copper alloy billet continuous caster", International Journal of Cast Metals Research, 2009, pp. 160-163 |
| M.S. Bafghi, A.R. Asghari, A. Zakeri, S.H. Seyedein, “Removal of silicon impurity from molten brass using an innovative ZnO-containing slag” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 40 (5), 2009, pp. 749-754. doi:10.1007/s11663-009-9280-9 |
|
M. Asadian, S.H. Seyedein, M.R. Aboutalebi, A. Maroosi, “Optimization of the parameters affecting the shape and position of crystal-melt interface in YAG single crystal growth”, Journal of Crystal Growth, 311 (2009) 342-348.
|
|
B. Mirzakhani, H. Arabi, M.T. Salehi, S.H. Seyedein , M.R. Abutalebi, Sh. Khoddam, A.Mohammadi, " Computer Aided Optimization of Specimen Geometry of Hot Torsion Test to Minimize Microstructure non Homogeneity and Temperature Gradient befor Deformation", Iranian Journal of Materials Science & Engineering, V. 6, no. 3, 35-43, 2009
|
|
B. Mirzakhani, H. Arabi, M.T. Salehi, Sh. Khoddam, J. Sietsma, S.H. Seyedein , M.R. Abutalebi, " Prediction of Static Softening of a Microalloyed Steel by the Integration of Finite Element Model with Physically Based State Variable Model", Iranian Journal of Materials Science & Engineering, V. 6, no. 4, 2009
|
|
A. Jafari, S.H. Seyedein, M. Haghpanahi, " Modeling of Heat Transfer and Solidification o Droplet/Substrate in Microcasting SDM Process", IUST International Journal of Engineering Science, V. 19, no. 5-1, 187-198, 2008
|
|
B. Mirzakhani, M.T. Salehi, H. Arabi, S. Khoddam, S.H. Seyedein , M.R. Aboutalebi, " Prediction of temperature distribution in the hot torsion test specimen", IUST International Journal of Engineering Science, V. 19, no. 5-1, 45-50, 2008
|
|
S. Kianfar, S.H. Seyedein, M.R. Abutalebi, " Solidification Modeling and Dendrite Structure Analysis in a Horizontal Continuously Cast Brass Billet", Iranian Journal of Materials Science & Engineering, V. 5, no. 4, 16-24, 2008
|
|
H. Arabi, S. H. Seyedein, M. Soltanieh, N.Tabatabair, "New method for life assessment of 1%Cr-0.5%Mo low alloy steel on the base of grain boundary creep cauitation", Iranian Journal of Materials Science & Engineering, Vol. 2, No. 4, 2005, pp. 10-14
|
|
S.H. Seyedein, M.R. Aboutalebi, A. Jafari, "Numerical simulation of coupled fluid flow and solidification in a single roll caster", Canadian Metallurgical Quarterly, No. 45, 2006, pp. 329-340
|
| M. R. Aboutalebi, R. I. L. Guthrie, S. H. seyedein, “Mathematical modeling of coupled turbulent flow and solidification in a single belt caster with electromagnetic brake”, Applied mathematical modeling, 2006 |
|
A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, M. A. Razzazi, "Study of joining mechanism in brass/steel/brass sandwich materials prepared by scratch brushing method", Iranian Journal of Materials Science & Engineering, Vol. 2, No. 4, 2005, pp. 33-40
|
|
A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein , "A study of bonding mechanism in brass/steel/brass sheet composites ", International Journal of Engineering Science &, Vol. 16, No. 2, 2005, pp. 55-59
|
| Nayebpashaee, N. , Aboutalebi, M. , Vafaeenezhad, H. , Hadavi, S.M. , Seyedein, S.H. , Sarpoolaky, H, "Micromechanical modeling of crack propagation in TBC systems", 6th Conference on Thermal Power Plants, CTPP 2016, No. 7483056, Pages 69-75 |
|
S. Aleali, S.H. Seyedein, M.R. Aboutalebi, M.T. Salehi, S. Khani, " Simulation of Heat Transfer and Phase Change in Laser Welding of Aluminum Alloy 6061 T6", Proceedings of Iran International Aluminum Conference (IIAC 2012)
|
|
P. Moinpour, S.H. Seyedein, S. Gh. Shabestari, H. Pakzad, A. Shekarian, M. Adeli, " A Numerical Study on the Effect of Air Gap on the Solidification of A356 Alloy"Proceedings of Iran International Aluminum Conference (IIAC 2012)
|
|
Barati H., Aboutalebi M.R., Shabestari S., Seyedein S.H., “Phase-field simulation of dendritic solidification of a binary alloy in presence of melt convection”, IMMC2010, 15th International Metallurgy and Materials Congress, Istanbul, Turky.
|
|
N. Dakhili, H. Razavizadeh, M.T. Salehi, S.H. seyedein,"Recovery of Zinc from the Final Slag of Steel’s Galvanizing Process", The International Conference on Advances in Materials and Processing Technologies, (AMPT), 26-29 October 2009, Kuala Lumpur, Malaysia
|
|
S.H. Seyedein, M.R. Aboutalebi, A. Jafari, Numerical simulation of coupled fluid flow and solidification in a single-roll caster, CIM-43th Annual Conference of Metallurgists of CIM, Canada
|
|
N. Sharifi, S.H. seyedein, M.R. Aboutalebi, " Mathematical modeling of turbulent fluid flow and mass transfer in a steel continuous casting tundish", AMPT 2009, The International Conference on Advances in Materials and Processing Technologies, (AMPT), 26-29 October 2009, Kuala Lumpur, Malaysia
|
|
M. Shekari, S.H. seyedein, M.R. Aboutalebi, M. Adeli, "Numerical simulation of combustion synthesis of Ni-Al intermetallic compounds: process parameters study", AMPT 2009, The International Conference on Advances in Materials and Processing Technologies, (AMPT), 26-29 October 2009, Kuala Lumpur, Malaysia
|
| A.H. Meysami, R. Ghademzadeh, S.H. Seyedein, M.R. Aboutalebi, A. Memari, " The effect of direct quenching and tempering process on mechanical properties and microstructure of AISI 4140 steels as compared with conventional re-austenited, quenched and tempered heat treatment", 3rd International Conference on Thermomechanical Processing of Steels, 2008 |
|
/seyedein.jpg)
iust.ac.ir