آدرس: دانشگاه علم و صنعت ایران، دانشکده مهندسی مکانیک - تهران، ایران، کد پستی ۱۳۱۱۴-۱۶۸۴۶
دانشگاه های محل تحصیل
دکتری، دانشگاه لیدز، انگلستان
کارشناسی ارشد، دانشگاه لیدز، انگلستان
زمینه‌های تحقیقاتی (تحصیلات تکمیلی)
تحلیل جریان و انتقال گرما مرتبط با تکنیک‌های خنک‌کاری قطعات داغ در موتورهای توربین گاز
انتقال حرارت ترکیبی (جابجائی مختلط + تشعشع گرمایی) در مقیاس ماکرو و نانو
تحلیل جریان و انتقال جرم مرتبط با پخش آلاینده‌های گازی و جامد اطراف ساختمان‌ها
راهنمایی پایان‌نامه و رساله‌های تحصیلات تکمیلی (چند نمونه)
Abedinejad, M.S., "Analysis of Liquid Fuel Injection in a Model Combustion Chamber with the Aim of Reducing NOx", (Ph.D), 2018
Vasefi, S.I., "Analysis of Effective Parameters on Particle Dispersion and Turbulent Mixed Convection of Nanofluid", (Ph.D), 2018
Moghaddam, S., "Analysis of Combined Turbulent Heat Transfer (Mixed Convection-Radiation) with Variable Properties in Channels using Large Eddy Simulation", (Ph.D), 2017
Kiamansouri, M., "Analysis of Dynamic Global Sub-grid Scale Models for Large Eddy Simulation of Pollutant Dispersion around a Model Building", (Ph.D), 2016
Jadidi, M., "Analysis of dynamic algebraic sub-grid scale heat flux models in large eddy simulation", (Ph.D), ۲۰۱۴
Jahromi, M., "Analysis of unsteady turbulent flow in a pulsating synthetic jet", (Ph.D), ۲۰۱۱
Rajabi-Zargarabadi, M., "Second moment closure modeling of turbulent flow and heat transfer in cooling techniques", (Ph.D), ۲۰۰۹
Mohammadi, M., "Analysis of relations between entropy generation and emissions in a gas turbine model combustor", (M.Sc.), 2019
Mirzaei, S., "Effect of fuel injection on reducing NOx emissions in a gas turbine model combustor", (M.Sc.), 2017
Hatami, M., "Analysis of Heat Transfer and Flow Field of a Synthetic Jet in the Presence of a Cross-Flow along with Modelling an Oscillating Actuator", (M.Sc.), ۲۰۱۵
Mohammadi-Ahmar, A., "Dispersion Analysis of Exhaust Pollutant From the Vent of a Cubical Model Building by Non-Linear k-ε Turbulence Models and LES", (M.Sc.), ۲۰۱۴
Aghaamini, M., "Analysis of Turbulent Combined Mixed Convection and Radiation Heat Transfer in a Vertical Channel", (M.Sc.), ۲۰۱۴
Sedaghatnejad, M., "Simulation of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct with Asymmetric Boundary Condition", (M.Sc.), ۲۰۱۴
Bohlooli, N., "Investigation of Turbulent Flow Coherent Structures in Film Cooling of Model Turbine Blade Leading Edge", (M.Sc.), ۲۰۱۳
Ghafouri, A., "Effect of near-wall treatments and Evaluation of Grid Resolution in Large Eddy Simulation", (M.Sc.), ۲۰۱۲
مقالات ژورنال
Farzad Bazdidi-Tehrani, Saied Moghaddam, and Masoud Aghaamini, 2016, "On the Validity of Boussinesq Approximation in Variable Property Turbulent Mixed Convection Channel Flows", Heat Transfer Engineering, An International Journal, Article in Press
Fazad Bazdidi-Tehrani, Mohsen Kiamansouri, and Mohammad Jadidi, 2016, "Inflow Turbulence Generation Techniques for Large Eddy Simulation of Flow and Dispersion around a Model Building in a Turbulent Atmospheric Boundary Layer", Journal of Building Performance Simulation, Vol. 9, No. 6, pp. 680-698.
Farzad Bazdidi-Tehrani, Masoud Aghaamini, and Saied Moghaddam, 2016, "Radiation Effects on Turbulent Mixed Convection in an Asymmetrically Heated Vertical Channel", Heat Transfer Engineering, An International Journal, DOI: 10.1080/01457632.2016.1194695
Mohammad Jadidi, Farzad Bazdidi-Tehrani, and Mohsen Kiamansouri, ۲۰۱۶, "Embedded Large Eddy Simulation Approach for Pollutant Dispersion around A Model Building in Atmospheric Boundary Layer", Environmental Fluid Mechanics, Vol. 16, Issue 3, pp. 575-601.
Mohammad Jadidi, Farzad Bazdidi-Tehrani, and Mohsen Kiamansouri, ۲۰۱۶, "Dynamic Sub-Grid Scale Turbulent Schmidt Number Approach in Large Eddy Simulation of Dispersion around an Isolated Cubical Building", BUILDING SIMULATION, Vol. ۹, Issue ۲, pp. ۱۸۳-۲۰۰.
Navid Madanchi, Farshad Kowsary, and Farzad Bazdidi-Tehrani, 2015, "On the Simulation of Diaphragm Oscillation and Modeling Methods for an Impinging Synthetic Jet", Journal of Enhanced Heat Transfer, Vol. 22, Issue 5, pp. 417-440.
Farzad Bazdidi-Tehrani, Mohammad Sedaghatnejad, Seyed Iman Vasefi, and Naeem Ekrami Jolandan, 2016, "Investigation of Mixed Convection and Particle Dispersion of Nanofluids in a Vertical Duct", Proc IMechE Part C: J Mechanical Engineering Science, Vol. 230(20) 3691-3705.
Bazdidi-Tehrani, F., Abouata, A., Hatami, M., and Bohlooli, N., ۲۰۱۵, "Investigation of Effects of Compressibility, Geometric and Flow Parameters on the Simulation of a Synthetic Jet Behavior", The Aeronautical Journal, Article in Press.
Bazdidi-Tehrani, F., Hatami, M. and Abouata, A., ۲۰۱۵, "Effects of Inlet and Outlet Boundary Conditions on the Flow Field of Synthetic Jets", Proc IMechE Part E: J Process Mechanical Engineering, DOI: ۱۰.۱۱۷۷/۰۹۵۴۴۰۸۹۱۵۵۷۷۳۳۸
Farzad Bazdidi-Tehrani, Akbar Mohammadi-Ahmar, Mohsen Kiamansouri, Mohammad Jadidi, ۲۰۱۵, "Investigation of various non-linear eddy viscosity turbulence models for simulating flow and pollutant dispersion on and around a cubical model building", BUILDING SIMULATION, Vol. ۸, Issue ۲, pp. ۱۴۹-۱۶۶.
F. Bazdidi Tehrani, M. Sedaghatnejad, N. Ekrami, I. Vasefi, Single Phase and Two Phase Analysis of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct under an Asymmetric Thermal Boundary Condition, Modares Mechanical Engineering, Vol. ۱۴, No. ۱۳, pp. ۴۷-۵۸, ۲۰۱۵ (in Persian)
Bazdidi-Tehrani, F., Bohlooli, N., and Jadidi, M., ۲۰۱۵, "Influence of Film Cooling Jet Inlet Boundary Condition on Large Eddy Simulation of Model Turbine Blade Leading Edge", Progress in Computational Fluid Dynamics, Vol. ۱۵, No. ۴, pp. ۲۱۴-۲۲۷.
Bazdidi-Tehrani, Farzad, and Jadidi, Mohammad, ۲۰۱۴, "Large Eddy Simulation of Dispersion around an Isolated Cubic Building : Evaluation of Localized Dynamic KSGS-Equation Subgrid-Scale Model", Environmental Fluid Mechanics, Vol. ۱۴, pp. ۵۶۵-۵۸۹.
Bazdidi-Tehrani, Farzad, Ghafouri, Ahmad and Jadidi, Mohammad, ۲۰۱۳, "Grid resolution assessment in large eddy simulation of dispersion around an isolated cubic building", J. Wind Eng. Ind. Aerodyn., Vol. ۱۲۱, pp. ۱-۱۵.
Bazdidi-Tehrani, F., Foroutan, H., and Rajabi-Zargarabadi, M ., ۲۰۱۳, "Film cooling effectiveness in single row of holes: First moment closure modeling", Journal of Energy Equipment and Systems, Vol. ۱, No. ۱, pp. ۶-۱۸.
Bazdidi-Tehrani, F., and Safakish, A., ۲۰۱۴, "Mixed Convection and Thermal Radiation Heat Transfer in a Three Dimensional Asymmetrically Heated Vertical Channel", Heat Transfer Research, Vol. ۴۵, Issue ۶, pp. ۵۴۱-۵۶۱.
Bazdidi-Tehrani, F., Eghbali, A., and Karami, M., ۲۰۱۳, "Influence of Jet-to-Surface Distance and Frequency on Unsteady Heat Transfer and Mass Flow Rates in an Impingement Synthetic Jet", Journal of Enhanced Heat Transfer, Vol. ۲۰, No. ۲, pp. ۱۱۵-۱۳۶.
Zeinivand, H., and Bazdidi-Tehrani, F., ۲۰۱۱, " Investigation of Radiative Heat Transfer and Three Thermal Radiation Models in a Turbulent Non-Premixed Methane/Air Flame", Heat Transfer Research, Vol. ۴۲, No. ۶, pp. ۵۷۱-۵۹۳.
Zeinivand, H., and Bazdidi-Tehrani, F., ۲۰۱۲, "Influence of Stabilizer Jets on Combustion Characteristics and NO x Emission in a Jet-Stabilized Combustor", Applied Energy, Vol. ۹۲, pp. ۳۴۸-۳۶۰.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۱۲, " On the Evolution of a Plain Zero Net Mass Flux Jet Injected in a Quiescent Medium", Journal of Dispersion Science and Technology, Taylor & Francis, Article in Press.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۱۱, "Analysis of Synthetic Jet Flow Field: Application of URANS Approach", Transactions of the Canadian Society for Mechanical Engineering, Vol. ۳۵, No. ۳, pp. ۳۳۷-۳۵۳.
Bazdidi-Tehrani, F., and Nazaripoor, H., ۲۰۱۱, "Buoyancy-Assisted Flow Reversal and Combined Mixed Convection-Radiation Heat Transfer in Symmetrically Heated Vertical Parallel Plates: Influence of Two Radiative Parameters", Scientia Iranica, Transactions B: Mechanical Engineering, Vol. ۱۸, Issue ۴, pp. ۹۷۴-۹۸۵.
Bazdidi-Tehrani, F., Imanifar, A., Khajehhasani, S., and Rajabi-Zargarabadi, M., ۲۰۱۲, "Normal-Velocity Relaxation and Higher Order Algebraic Heat Flux Models Applicable to an Axisymmetric Impinging Jet", Journal of Dispersion Science and Technology, Taylor & Francis, Vol. ۳۳, pp. ۵۵۶-۵۶۴ .
Bazdidi-Tehrani, F., Karami, M., and Jahromi, M., ۲۰۱۱, "Unsteady Flow and Heat Transfer Analysis of an Impinging Synthetic Jet", Heat and Mass Transfer, Vol. ۴۷, Issue ۱۱, pp. ۱۳۶۳-۱۳۷۳.
Bazdidi-Tehrani, F., and Zeinivand, H., ۲۰۱۰, "Presumed PDF Modeling of Reactive Two-Phase Flow in a Three Dimensional Jet-Stabilized Model Combustor", Energy Conversion and Management, Vol. ۵۱, Issue ۱, pp. ۲۲۵–۲۳۴.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۱۰, "Implicit Algebraic Model for Predicting Turbulent Heat Flux in Film Cooling Flow", Int. J. Numer. Meth. Fluids, ۲۰۱۰; ۶۴:۵۱۷–۵۳۱
Bazdidi-Tehrani, F., and Zeinivand, H., ۲۰۰۹, "Influence of Thermal Radiation models on Prediction of Reactive Swirling methane-air Flame in a Model Gas Turbine Combustor", Journal of Fuel and Combustion (Iranian Combustion Institute),Vol. ۱, No. ۲, pp. ۱-۱۵, Winter.
Bazdidi-Tehrani, F., and Shahini, M., ۲۰۰۹, "Combined Mixed Convection-Radiation Heat Transfer within a Vertical Channel: Investigation of Flow Reversal", Numerical Heat Transfer, Part A, Vol. ۵۵, pp. ۲۸۹-۳۰۷.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۸, "Application of Second Moment Closure and Higher Order Generalized Gradient Diffusion Hypothesis to Impingement Heat Transfer", Transactions of the Canadian Society for Mechanical Engineering, CSME , Vol. ۳۲, No. ۱, pp. ۹۱-۱۰۵.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۰۶, “Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor,” J. Aerospace Science and Technology, Vol. ۳, No. ۲, Spring.
Bazdidi-Tehrani, F., and Nezamabadi, M., ۲۰۰۵, “Effect of Gr/Re on Mixed Convection and Combined Mixed Convection–Radiation Heat Transfer within a Vertical Channel”, Scientia Iranica (Sharif Univ. of Technology), Vol. ۱۲, No. ۲, pp. ۱۷۸-۱۸۹.
Bazdidi-Tehrani, F., Shervani-Tabar, M.T., and Ghafouri, J., ۲۰۰۵, “Numerical and Experimental Analysis of Cavitation in a Centrifugal Pump,” Int. J. Eng. Science, IUST, Vol. ۱۶, No. ۲, pp. ۸۵-۹۲, summer.
Bazdidi-Tehrani, F., Shahmir, A., and Haghparast-Kashani, A., ۲۰۰۴, “Numerical Analysis of a Single Row of Coolant Jets Injected into a Heated Crossflow,” Journal of Computational and Applied Mathematics, Vol. ۱۶۸, Issues ۱-۲, pp. ۵۳-۶۳, Elsevier.
Bazdidi-Tehrani, F., and Naderi-Abadi, M., ۲۰۰۴, “Numerical Analysis of Laminar Heat Transfer in Entrance Region of a Horizontal Channel with Transverse fins,” International Communications in Heat and Mass Transfer, Vol. ۳۱, No. ۲, pp. ۲۱۱-۲۲۰, Elsevier.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۰۳, “Three-Dimensional Numerical Simulation of the Flow Inside a Model Gas Turbine Combustor,” Int. J. Eng. Science, IUST, Vol. ۱۴, No. ۳, pp. ۱۶۱-۱۷۳, summer.
Bazdidi-Tehrani, F., and Zaman, S., ۲۰۰۲, “Two-Phase Heat Transfer on an Isothermal Vertical Surface : A Numerical Simulation," International Journal of Heat and Fluid Flow, Vol. ۲۳, Issue ۳, pp. ۳۰۸-۳۱۶, Elsevier.
Bazdidi-Tehrani, F., and Zaman, S., ۲۰۰۲, “Numerical Analysis of Film Boiling Heat Transfer on a Vertical Surface,” Int. J. Eng. Science, IUST, Vol. ۱۳, No. ۳, pp. ۱۹-۳۴, Summer.
Bazdidi-Tehrani, F., and Mahmoodi, A.A., ۲۰۰۲, “Investigation of the Effect of Turbulence Intensity and Injection Angle on the Flow and Temperature Fields in the Single Hole Film Cooling Technique,” Int. J. Eng. Science, IUST, Vol. ۱۲, No. ۴, Winter.
Bazdidi-Tehrani, F., and Mahmoodi, A.A., ۲۰۰۱, “Finite Element Analysis of Flowfield in the Single Hole Film Cooling Technique,” Annals of the New York Academy of Sciences, Vol. ۹۳۴, May.
Bazdidi-Tehrani, F., and Masoudian, F., ۲۰۰۱, “Determination of the Temperature Distribution Through the Waterwalls in the Water-Tube Boilers,” Int. J. Eng. Sciences, IUST, Vol. ۱۲, No. ۱, spring.
Bazdidi-Tehrani, F., and Andrews, G.E., ۱۹۹۴, “Full Coverage Discrete Hole Film Cooling: Investigation of the Effect of Variable Density Ratio,” ASME Journal of Engineering for Gas Turbines and Power, Vol. ۱۱۶, pp. ۵۸۷-۵۹۶.
مقالات کنفرانس
Bazdidi-Tehrani, F., and Safakish, A., ۲۰۱۱, "Mixed Convection and Thermal Radiation Heat Transfer in a Three Dimensional Vertical Channel with Different Walls Temperatures," ۷ th International Conference on Computational Heat and Mass Transfer , Istanbul, Turkey, July.
Bazdidi-Tehrani, F., and Kamrava, M.H., ۲۰۱۱, " Heat Transfer Analysis in a Conductive-Radiative Space Radiating Fin: Comparison with analytical solutions," ۷ th International Conference on Computational Heat and Mass Transfer , Istanbul, Turkey, July.
Bazdidi-Tehrani, F., and Nazaripoor, H., ۲۰۱۱, "Buoyancy Assisted and Opposed Combined Mixed Convection-Radiation Heat Transfer in a Vertical Parallel Plate," ۱۹ th Annual Conference on Mechanical Engineering (ISME۲۰۱۱), Birjand, Iran, May.
Bazdidi-Tehrani, F., and Kamrava, M.H., ۲۰۱۰, " Combined Heat Transfer Calculations in a Fin-Tube Radiator with Temperature-Dependent Thermal Conductivity," World Academy of Science, Engineering and Technology (WASET ۲۰۱۰), ۶۹, pp. ۱۷۶-۱۸۴, August.
Bazdidi-Tehrani , F., Khalili Param , H., and Jadidi, M., ۲۰۱۰, " Influence of Supply Plenum on Jet Hole Flow Structure Applicable to Film Cooling: LES Approach," ۱۸ th Annual International Conference on Mechanical Engineering (ISME۲۰۱۰), Sharif University of Technology, Tehran, Iran, May.
Zeinivand, H., and Bazdidi-Tehrani, F., ۲۰۱۰, "INFLUENCE OF SWIRL NUMBER ON NOX FORMATION IN A TURBULENT NON-PREMIXED FLAME," Proceedings of the ASME ۱۰th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July.
Bazdidi-Tehrani, F., Eghbali , A., and Karami, M., ۲۰۱۰, " Instantaneous Heat Transfer Analysis of an Impinging Synthetic Jet via Vortex Trajectory: Effect of Diaphragm Vibration Frequency," ۱۳ th Annual and ۲ nd International Fluid Dynamics conference, Shiraz, Iran, October.
Bazdidi-Tehrani, F., Foroutan, H., and Rajabi-Zargarabadi, M., ۲۰۰۹, " First moment closure modeling of film cooling effectiveness in single row of cylindrical holes," Int. Symp. on Heat Transfer in Gas Turbine Systems, Antalya, Turkey, August.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۸ , " Effect of Turbulent Heat Flux Models on Prediction of Film Cooling Characteristics, Proceedings of CHT-۰۸ (ICHMT) International Symposium on Advances in Computational Heat Transfer, Marrakech, Morocco, May.
Bazdidi-Tehrani, F., and Pezeshkpour, P., ۲۰۰۸, "Influence of Compound Angle Injection on Film Cooling through Two Staggered Rows of Holes," International Conference on Fascinating Advancement in Mechanical Engineering (FAME۲۰۰۸), Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India, December.
Bazdidi-Tehrani, F., Jahromi, M., Karami, M., and Javadi, A., ۲۰۰۸, " Numerical Analysis of a Zero Net Mass Flux Jet in a Quiescent Medium", ۱۶th Annual Conference of the CFD Society Canada, University of Saskatchewan, Saskatoon, May.
Bazdidi-Tehrani, F., Foroutan, H., Rajabi-Zargarabadi, M., ۲۰۰۸, "Film Cooling Heat Transfer Predictions: Effects of Variable Turbulent Prandtl Number", ۱۶th Annual Conference of the CFD Society Canada, University of Saskatchewan, Saskatoon, May.
Bazdidi-Tehrani, F., and Houshfar, E., ۲۰۰۶, “Numerical Analysis of Temperature & Flow Fields in the Single Row Film Cooling Technique Using Shaped (Elliptic) Holes,” The ۱۰th Annual Fluid Dynamics Conference, The Physical Society of Iran.
Bazdidi-Tehrani, F., and Houshfar, E., ۲۰۰۶, “Single Row of Film Cooling Shaped (Elliptic) Holes: A Numerical Simulation,” The ۱۴th Annual Conference and the ۱۰th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., Feizollahi, H., ۲۰۰۵, “Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow,” Proceedings of ۳rd Int. Conference on Advanced Computational Methods in Engineering (ACOMEN۲۰۰۵), Ghent, Belgium, May.
Bazdidi-Tehrani, F., and Sabbaghi, M., ۲۰۰۵, “Two-Dimensional Axisymmetric Analysis of Flow in the Diffuser-Combustor region of Gas Turbine Engine,” ۱۳th Annual Conference and the ۹th Int. Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., Feizollahi, H., and Jahromi, M., ۲۰۰۵, “Numerical Simulation of Flow and Temperature Fields for Opposed Rows of Coolant Jets,” ۱۳th Annual Conference and the ۹th Int. Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., Moslehishad, H., Rajabi-Zargarabadi, M., and Jahromi, M., ۲۰۰۵, “Numerical Simulation of Effects of Blowing Rate and Momentum Flux Ratios on Film Cooling Effectiveness,” ۱۳th Annual Conf. & ۹th Int. Conf. of Iranian Society of Mech. E
Yuan, Z., Mucciardi, F., and Bazdidi-Tehrani, F., ۲۰۰۴, “A Sensor for Continuous Temperature Measurement in Steel Making Environments," Proceedings of the ۱۶th World Conference on Nondestructive Testing (۱۶wcndt), Montreal, Canada, August ۳۰-September ۳.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۳, “Numerical Simulation of Combustion Phenomenon in a Model Combustion Chamber,” Proceedings of the Third Mediterranean Combustion Symposium, Marrakech, Morocco, June ۸-۱۳.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۰۳, “Three-Dimensional Numerical Simulation of the Flow Inside a Model Gas Turbine Combustor,” Proceedings of the Eleventh Annual Conference of the CFD Society of Canada (CFD ۲۰۰۳), Vancouver, BC, Canada, May ۲۸-۳۰
Bazdidi-Tehrani, F., and Naderi, M., ۲۰۰۳, “Numerical Analysis of Laminar Heat Transfer in the Entrance Region of a Finned Horizontal Channel,” The ۱۱th Annual Conference and the ۷th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۳, “Numerical Simulation of Combustion Phenomenon in a Sample Combustion Chamber Together With Radiation Modelling,” The ۱۱th Annual Conference and the ۷th International Conference of Iranian Society of
Bazdidi-Tehrani, F., Haghparast-Kashani, A., and Shahmir, A., ۲۰۰۳, “Numerical Analysis of Flowfield in the Dilution Zone of a Sample Gas Turbine Annular Combustion Chamber,” The ۴th Iranian Aerospace Society Conference.
Bazdidi-Tehrani, F., and Argian, J., ۲۰۰۲, “Numerical Analysis of Viscous ۳-D Turbine Cascade Flow in a Gas Turbine,” The ۱۰th Annual Conference and the ۶th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Shahmir, A., ۲۰۰۲, “Turbulent Mixing of a Single Row of Coolant Jets with a Hot Confined Crossflow: A Numerical Simulation,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May ۲۷-۳۱.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۰۲, “Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May ۲۷-۳۱.
Bazdidi-Tehrani, F., and Haghparast-Kashani, A., ۲۰۰۲, “CFD Analysis of a Single Three-Dimensional Jet Injected Normally into a Crossflow,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May ۲۷-۳۱.
Bazdidi-Tehrani, F., and Zaman, S., ۲۰۰۱, “Two-Phase Heat Transfer on an Isothermal Vertical Surface : A Numerical Simulation,” Proceedings of ۲nd International Symposium on Advances in Computational Heat Transfer, Palm Cove, Queensland, Australia, May ۲۰
Bazdidi-Tehrani,F., and Ghasemi, M., ۲۰۰۱, “Thermodynamic Analysis of a Heat Pipe,” The ۹th Annual Conference and the ۵th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Simonian, R., ۲۰۰۱, “Numerical Analysis of Condensation in Annular Flow in a Horizontal Tube,” The ۹th Annual Conference and the ۵th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Salehizadeh Manshadi, A., ۲۰۰۰, “Numerical Solution of Fluid Flow in the Entrance Region of a Finned, ۲-D Channel,” The ۸th Annual Conference and the ۴th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Mahmoodi, A.A., ۲۰۰۰, “Analysis of Flow and Temperature Fields in the Single Hole Film Cooling Technique,” The ۸th Annual Conference and The ۴th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Rezaei, M.T., ۱۹۹۸, “Numerical Analysis of Boiling Heat Transfer in Annular Flow in Vertical Tubes,” The ۶th Annual Conference and The ۳rd International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Andrews, G.E., ۱۹۹۷, “Full Coverage Discrete Hole Film Cooling: Investigation of the Effect of Variable Density Ratio: Part-II,” Presented at the ASME Turbo Exposition, Orlando, Florida, June ۲-۵, ASME Paper No. ۹۷-GT-۳۴۱.
Bazdidi-Tehrani, F., and Dashti, A., ۱۹۹۷, “Numerical Analysis of Condensation Heat Transfer in Stratified Flow in Horizontal Tubes,” The ۵th Annual Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Ahmadian, M.T., ۱۹۹۷, ”Numerical Analysis of Slot Film Cooling in Turbulent Flow with Tangential Injection,” The ۵th Annual Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Haghighi, A., ۱۹۹۶, ”The Effect of Hole Size and The Number of Holes on The Cooling of Gas Turbine Combustors,” The ۴th Annual Conference and The ۲nd International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Sarmadi, A., ۱۹۹۵, ”Heat Pump Design and Calculations with an Emphasis on Heat Transfer ,“ The ۳rd Annual Conference of Iranian Society of Mechanical Engineers.
Andrews, G.E., Khalifa, I.M., Asere, A.A., and Bazdidi-Tehrani, F., ۱۹۹۵, “Full Coverage Effusion Film Cooling With Inclined Holes,” ASME Paper No. ۹۵-GT-۲۷۴.
Rezaei, B., Bazdidi-Tehrani, F., and Ektesabi, M.R., ۱۹۹۲, “A Computer Program for Evaluation of Radiative Heat Flux in the Water-Tube Boilers,” The Annual Conference on Pressure Vessels & Boilers.
Andrews, G.E., Bazdidi-Tehrani, F., Hussain, C.I., and Pearson, J.P., ۱۹۹۱, “Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Hole Length,” ASME Paper No. ۹۱-GT-۳۴۴.
Andrews, G.E., and Bazdidi-Tehrani, F., ۱۹۸۹, “Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Number of Holes,” ASME Paper No. ۸۹-GT-۷.
Andrews, G.E., Alikhanizadeh, M., Bazdidi-Tehrani, F., Hussain, C.I., and Khoshkbar Azari, M.S., ۱۹۸۷, “Small Diameter Film Cooling Holes: The Influence of Hole Size and Pitch,” ASME Paper No. ۸۷-HT-۲۸.
.jpg)
