|
Publications
|
| Azari, R. , Rezaie, H.R. , Khavandi, A., " Effect of titanium dioxide intermediate layer on scratch and corrosion resistance of sol–gel-derived HA coating applied on Ti-6Al-4V substrate", Progress in Biomaterials, 2021, 10(4), pp. 259–269 |
| Moshayedi, S. , Sarpoolaky, H. , Khavandi, A., "F abrication, swelling behavior, and water absorption kinetics of genipin-crosslinked gelatin–chitosan hydrogels", Polymer Engineering and Sciencethis link is disabled, 2021, 61(12), pp. 3094–3103 |
| Graby, J. , Khavandi, A. , Thompson, D. , ... Antoniades, C. , Rodrigues, J.C.L., " CT coronary angiography-guided cardiovascular risk screening in asymptomatic patients: is it time?", Clinical Radiologythis link is disabled, 2021, 76(11), pp. 801–811 |
| Aboudzadeh, N. , Khavandi, A. , Javadpour, J. , Shokrgozar, M.A. , Imani, M., " Effect of dioxane and n-methyl-2-pyrrolidone as a solvent on biocompatibility and degradation performance of plga/nha scaffolds", Iranian Biomedical Journalthis link is disabled, 2021, 25(6), pp. 408–416 |
| Eivani, A.R. , Tabatabaei, F. , Khavandi, A.R. , ... Jafarian, H.R. , Zhou, J., " The effect of addition of hardystonite on the strength, ductility and corrosion resistance of WE43 magnesium alloy", Journal of Materials Research and Technology, 2021, 13, pp. 1855–1865 |
| Hesari, S.M. , Ghorbani, F. , Ghorbani, F. , Zamanian, A. , Khavandi, A., " Plasma surface modification technique–induced gelatin grafting on bio-originated polyurethane porous matrix: Physicochemical and in vitro study", Polymers and Polymer Composites, 2021, 29(6), pp. 640–651 |
| Esnaashary, M.H. , Karfarma, M. , Rezaie, H.R. , Khavandi, A. , Javadpour, J., " The Comparative Study of Gelatin/CNT-contained Mg-Ca-P Bone Cement with the Plain and CNT-reinforced Ones", Journal of Bionic Engineering, 2021, 18(3), pp. 623–636 |
| Tavangar, R. , Moghadam, H.A. , Khavandi, A. , Banaeifar, S., " Comparison of dry sliding behavior and wear mechanism of low metallic and copper-free brake pads", Tribology International, 2020, 151, 106416 |
| Keshavarz, H. , Khavandi, A. , Alamolhoda, S. , Naimi-Jamal, M.R., " PH-Sensitive magnetite mesoporous silica nanocomposites for controlled drug delivery and hyperthermia", RSC Advances, 2020, 10(64), pp. 39008–39016 |
| Daryan, S.H. , Khavandi, A. , Javadpour, J., " Surface engineered hollow hydroxyapatite microspheres: Hydrothermal synthesis and growth mechanisms", Solid State Sciences, 2020, 106, 106301 |
| Keshavarz, H. , Khavandi, A. , Alamolhoda, S. , Naimi-Jamal, M.R., " Magnetite mesoporous silica nanoparticles embedded in carboxybetaine methacrylate for application in hyperthermia and drug delivery", New Journal of Chemistry, 2020, 44(20), pp. 8232–8240 |
| Azari, R. , Rezaie, H.R. , Khavandi, A. , Mohammadi, E.M., " Effect of gradient layer of tio2-ha on properties of the ha coated ti-6al-4v", Defect and Diffusion Forum, 2020, 400, pp. 193–200 |
| Esnaashary, M.H. , Khavandi, A. , Rezaie, H.R. , Javadpour, J., " Mg-P/c-SWCNT Bone Cement: The Effect of Filler on Setting Behavior, Compressive Strength and Biocompatibility", Journal of Bionic Engineering, 2020, 17(1), pp. 100–112 |
| Isfahani, T., Javadpour, J., Khavandi, A., "Formation mechanism and phase transformations in mechanochemically prepared Al2O3-40wt% ZrO2 nanocomposite powder", Composite Interfaces,26(10), pp. 887-904, 2019 |
| Azari, R., Rezaie, H.R., Khavandi, A., "Investigation of functionally graded HA-TiO2 coating on Ti–6Al–4V substrate fabricated by sol-gel method", Ceramics International,45(14), pp. 17545-17555, 2019 |
| Shemshad, S., Kamali, S., Khavandi, A., Azari, S., "Synthesis, characterization and in-vitro behavior of natural chitosan-hydroxyapatite-diopside nanocomposite scaffold for bone tissue engineering", International Journal of Polymeric Materials and Polymeric Biomaterials,68(9), pp. 516-526, 2019 |
| Amini, M., Khavandi, A., "Synergistic effects of mechanical and environmental loading in stress corrosion cracking of glass/polymer composites", Journal of Composite Materials, Article in Press, 2019 |
| Amini, M., Khavandi, A., "Degradation of polymer-based composites in corrosive media: experimental attempts towards underlying mechanisms", Mechanics of Time-Dependent Materials, Article in Press, 2019 |
| Isfahani, T., Javadpour, J., Khavandi, A., "Formation mechanism and phase transformations in mechanochemically prepared Al2 O3 -40wt% ZrO2 nanocomposite powder", Composite Interfaces, Article in Press, 2019 |
| Kamali, S., Shemshad, S., Khavandi, A., Azari, S., "Construction novel hydroxyapatite-nitinol nanocomposite for hard tissue applications", Materials Chemistry and Physics, 220, pp. 331-341, 2018 |
| Amini, M., Khavandi, A., "Evaluation of the electrical properties and mechanical behavior of insulator's composite core in harsh environments", Materials Research Express, 5(11),115306, 2018 |
| Daryan, S.H., Javadpour, J., Khavandi, A., Erfan, M., "Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP", Ceramics International, 44(16), pp. 19743-19750, 2018 |
| Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Evaluation of setting time and compressive strength of a new bone cement precursor powder containing Mg–Na–Ca", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(10), pp. 1017-1024, 2018 |
| N. Abbasnezhada,b, A. Khavandi, J. Fitoussia, H. Arabib, M. Shirinbayana, A. Tcharkhtchia "Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK)", International Journal of Fatigue 109 (2018) 83–92 |
|
Bazli, L., Eftekhari Yekta, B., Khavandi, A., "Preparation and Characterization of Sn-Containing Glasses for Brachytherapy Applications", Transactions of the Indian Ceramic Society, Volume 76, Issue 4, 2 October 2017, Pages 242-246
|
| Esnaashary, M.H., Rezaie, H.R., Khavandi, A., Javadpour, J., "Solubility controlling of the precursor powders of magnesium phosphate cement by changing the powder composition", Advances in Applied Ceramics, Volume 116, Issue 5, 4 July 2017, Pages 286-292 |
| Bayat, O., Khavandi, A.R., Ghasemzadeh, R., "Synthesis of TiCr2 intermetallic compound from mechanically activated starting powders via calcio-thermic co-reduction", Physics of Metals and Metallography, Volume 118, Issue 5, 1 May 2017, Pages 444-451 |
| Bazli, L., Khavandi, A., Boutorabi, M.A., Karrabi, M., "Correlation between viscoelastic behavior and morphology of nanocomposites based on SR/EPDM blends compatibilized by maleic anhydride", Polymer (United Kingdom), Volume 113, 24 March 2017, Pages 156-166 |
| Bazli, L., Khavandi, A., Boutorabi, M.A., Karrabi, M."Morphology and viscoelastic behavior of silicone rubber/EPDM/Cloisite 15A nanocomposites based on Maxwell model", Iranian Polymer Journal (English Edition), Volume 25, Issue 11, 1 November 2016, Pages 907-918 |
| Sattari, M., Mirsalehi, S.A., Khavandi, A., Alizadeh, O., Naimi-Jamal, M.R., "Non-isothermal melting and crystallization behavior of UHMWPE/SCF/nano-SiO2 hybrid composites",Journal of Thermal Analysis and Calorimetry, Volume 122, Issue 3, 1 December 2015, Pages 1319-1330 |
| Mirsalehi, S.A., Khavandi, A., Mirdamadi, S., Naimi-Jamal, M.R., Kalantari, S.M., "Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications",Journal of Applied Polymer Science, Volume 132, Issue 23, 1 June 2015, Article number 42052 |
| Mirsalehi, S.A., Sattari, M., Khavandi, A., Mirdamadi, S., Naimi-Jamal, M.R., "Tensile and biocompatibility properties of synthesized nano-hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposite",Journal of Composite Materials, Volume 50, Issue 13, 2015, Pages 1725-1737 |
| Sattari, M., Molazemhosseini, A., Naimi-Jamal, M.R., Khavandi, A., "Nonisothermal crystallization behavior and mechanical properties of PEEK/SCF/nano-SiO2 composites", Materials Chemistry and PhysicsVolume 147, Issue 3, 15 October 2014, Pages 942-953 |
|
Taghi Dallali isfahani, J.Javadpour, A.Khavandi,M.Goodarzi,H.R.Rezaie, "Nanocrystalline Growth Activation Energy of Zirconia Polymorphs Synthesized by Mechanochemical Technique", J.of Mat Sci Technol, 387-393, 2014
|
|
M.Sattari, M.R.Naimi jamal, A.Khavandi, "Interphase evaluation and nano-mechanical responses of UHMWPE/SCF/nano-SiO2 hybrid composites", Polymer Testing, 26-34, 2014
|
| A.Molazem hosseini, H.Tourani, A.Khavandi, B.Eftekhari yekta, " Tribological performance of PEEK based hybrid composites reinforced with short carbon fibers andnano-silica", wear, 397-404, 2013 |
|
A.Houshyar ,A.Khavandi, J.Javadpour, M.R.Naimi jamal, M.Atai, "Enhancement of mechanical properties of experimental composite by Fuller’s earth nanofibers for cervical restoration", J Biomed Mater Res Part B: Appl Biomater, 1-8, 2013
|
|
Seyfoori, Sh.Mirdamadi, M.Mehrjoo, A.Khavandi, "In-vitro assessments of microarcoxidized ceramic films on AZ31magnesiumimplant:Degradationand cell-surfaceresponse", Progress in Natural Science: Materials International, 425-433, v. 4, n. 23, 2013
|
|
Molazemhossein, M.R.Naimi jamal, A.Khavandi, "Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica", Polymer Testing, 525-534, 2013
|
|
Rahmanian, H.Ghassai, A.Khavandi, Seyfoori, "Effects of formaldehyde solution and nanoparticles on mechanical properties and biodegradation of gelatin/nano β-TCP scaffolds ", Iranian Polymer Journal, 653-664, 2013
|
|
T.D.Isfahani,J.Javadpour, A.Khavandi, H.R.Rezaie, M.Goodarzi, "Nanocrystalline growth activation energy of alumina polymorphs synthesised by mechanochemical technique", Advances in Applied Ceramics, 316-321, 2013
|
| Daniel Fox, Yanhui Chen, Luke M. Geever, (Bagheri), khavandi Biqiong Chen, "The compatibilization role of clay in PP/EOC/PP-g-MA/EOC-g-MA/clay nanocomposite", Advanced Materials Research, 847-850, 2013 |
| A. Molazemhosseini, H. Tourani, A. Khavandi, B. Eftekhari Yekta, " Tribological performance of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica ", Wear. 06/2013; 303(s 1–2):397–404. |
| A. Molazemhosseini, H. Tourani, M.R. Naimi-Jamal, A. Khavandi, " Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica ", Polymer Testing 05/2013; 32(3):525–534. · 1.65 Impact Factor |
| Sedigheh Bagheri‐Kazemabad, Alireza Khavandi, Biqiong Chen, " Evaluation of toughening mechanisms of polypropylene/ethylene–octene copolymer/maleic anhydride-grafted poly(ethylene-co-octene)/clay nanocomposite ", Polymer International 04/2013; 62(4). 2.13 Impact Factor |
| Taghi Dallali Isfahani, Jafar Javadpour, Alireza Khavandi, Massoud Goodarzi, Hamid Reza Rezaie, " Nanocrystalline Growth Activation Energy of Zirconia Polymorphs Synthesized by Mechanochemical Technique ", Journal of Materials Science & Technology. 01/2013 |
| A. Seyfoori, Sh. Mirdamadi, M. Mehrjoo, A. Khavandi, " In-vitro assessments of micro arc oxidized ceramic films on AZ31 magnesium implant: Degradation and cell-surface response", Progress in Natural Science: Materials International. 01/2013; 23(4):425–433 |
| H.Tourani, A.Molazemhosseini, A.Khavandi, Sh.Mirdamadi, M.A.Shokrgozar,M.Mehrjoo, "Effects of Fibers and Nanoparticles Reinforcements on the Mechanical and Biological Properties of Hybrid Composite Polyetheretherketone/Short Carbon Fiber/ Nano-SiO2",Polymer Composites, 1-9, 2013 |
|
Dallai Isfahani, J.Javadpour, A.Khavandi, R.Dinnebier, H.Rezaie, M.Goodarzi, " Mechanochemical synthesis of alumina nanoparticles: Formation mechanism and phase transformation", Powder Technology, 17-23, 2012
|
| A. Seyfoori, Sh. Mirdamadi, A. Khavandi, Z. Seyed Raufi, " Biodegradation behavior of micro-arc oxidized AZ31 magnesium alloys formed in two different electrolytes ", Applied Surface Science 11/2012; 261:92–100. · 2.11 Impact Factor |
| Bayat, Ghasemzadeh, Khavandi, "Effect of Micro- and Nano-sized Starting Material on the Calciothermic Reduction of TiO2", international journal of self- propagating high temperature synthesis, vol. 21, no. 3, 2012 |
| Sedigheh Bagheri-Kazemabad, Daniel Fox, Yanhui Chen, Luke M. Geever, Alireza Khavandi, Reza Bagheri, Clement L. Higginbotham, Hongzhou Zhang, Biqiong Chen, " Morphology, rheology and mechanical properties of polypropylene/ethylene-octene copolymer/clay nanocomposites: Effects of the compatibilizer ", Composites Science and Technology 01/2012; 72(14):1697-1704. · 3.33 Impact Factor |
|
O.Bayat, A.Khavandi, R.Ghasemzadeh, "Calciothermic Co_Reduction of TiO2–Cr2O3 Oxides in Molten CaCl2: Effect of Particle Size of Starting Materials1", Russian Journal of Non_Ferrous Metals, 476-482, V. 35, No. 6, 2012
|
| ASGARPOUR M, BAKIR F, KHELLADI S, KHAVANDI A, TCHARKHTCHI A, " 3D Model for Powder Compact Densification in Rotational Molding ", Polymer Engineering and Science 01/2012; 52(9-DOI: 10.1002/pen.23133). 1.24 Impact Factor |
| H Sharifi, A R Khavandi, M Divandari, H M.I , Effect of magnesium and nickel coatings on the wetting behavior of alumina toughened zirconia by molten Al-Mg alloy ", International Journal of Minerals Metallurgy and Materials 01/2012; 19(1):77-82. · 0.48 Impact Factor |
|
O.Bayat, A.Khavandi, R.Ghasemzadeh, "Effect of Blend Granulometry on Calciothermic Reduction of TiO2", J. of Self_Propagating High_Temperature Synthesis, 151-155, 2012
|
|
O.Bayat, A.Khavandi, R.Ghasemzadeh, " Investigation of various reactions for the direct synthesis of TiCr2 intermetallic compound from the TiO2-Cr2O3-Ca system", Journal of Alloys and Compounds, 164-169, 2012
|
|
H.Sharifi, A.Khavandi, M.Divandari, M.I.Hasbullah, " Effect of magnesium and nickel coatings on the wetting behavior of alumina", International Journal of Minerals, Metallurgy and Materials, 77-82, 2012
|
| A. Montazeri. A. Khavandi, J.Javadpour, A. Tcharkhtchi, "Viscoelastic properties of multi-walled carbon nanotube/epoxy composites at the different nanotube content", J. of Nano Research, 2011 |
| A. Montazeri. A. Khavandi, J.Javadpour, A. Tcharkhtchi, " An investigation on the effect of sonication time and dispersing medium on the Mechanical properties of MWCNT/epoxy nanocomposites ", Advanced Materials Research , 2011 |
| A. Montazeri, A. Khavandi, J. Javadpour, A. Tcharkhtchi, "Viscoelastic properties of multi walled carbon nanotube/epoxy composites using two different curing cycles", Materials and Design, 2010 |
| A. Montazeri, J. Javdpour, A. Khavandi, A. Tcharkhtchi, A. Mohajeri, "Mechanical properties of multi-walled carbon nanotube/epoxy composites", Materials and Design, 2010 |
| H. Sharifi, M. Divandari, A. Khavandi, M. H. Edris, "Effect of Al powder and silica sol on the structure and mechanical properties of Al2O3-ZrO2 foams", Acta Metallurgica Sinica, 2010 |
| M.Asgharpour, F.Bakir, S.Khelladi, A.Khavandi, A.Tcharkhtchi, " Characterization and modeling of sintering of polymer particles", Journal of Applied Polymer Science, 2784-2792, 2010 |
| N. Aboudzadeh, A.Khavandi, J.Javadpour, M.Farokhi, " Fabrication and characterization of Poly(D,L-Lactide -co-glycolide)/hydroxyapatite nanocomposite scaffolds for bone tissue regeration", Journal of Biomedical Materials Research Part A, 137-145, 2010 |
|
M.Bagheri, I.Ghasemi, A.Khavandi, M.A.Shokrgozar, M.Farokhi, A.Ealamifar, " Synthesis of Nano B-TCP and the Effects on the Mechanical and Biological Properties of B-TCP/HDPE/UHMWPE Nanocomposites", Polymer Composites, 1745-1753, 2010
|
|
S.Bagheri, A.Khavandi, Y.Kharazi, " Effect of Mixing the Steel and Carbon Fibers on the Friction and Wear Properties of aPMC Friction Material", Applide Composite Materials, 151-158, 2010
|
|
A.Montazeri, A.Khavandi, J.Javadpour, A.Tcharkhtchi, " The effect of curing cycle on the mechanical properties of MWNT/epoxy nanocomposites", International Journal of polymer Analysis and Characterization, 182-190, 2010
|
|
S.Mobini, J.Javadpour,M.Hosseinalipour, M.Ghazi, A.Khavandi, H.R.Rezaie, " Synthesis and characterization of gelatin nano hydroxyapatite composites scaffolds for bone tissue engineering", advances in applied ceramics, 4-8, 2008
|
|
A.Yari Sadi, M.A.Shokrgozar, A.Khavandi, " Biological evaluation of partially stabilized zirconia added HA/HDPE composites with osteoblast and fibroblast cell lines", J. of mater sci: Mater Med, 2359-2365, 2008
|
|
S. Mollazadeh, J. Javadpour, A. R. Khavandi, “Biomimetic synthesis and mechanical properties of hydroxyapatite / poly (vinil alcohol) nanocomposites”, Advances in applied ceramics, 2007
|
|
S.Homaeigohar, M.A.Shokrgozar, A.Khavandi, A.yari Sadi, "In vitro biological evaluation of b–TCP/HDPE—A novel orthopedic composite: A survey using human osteoblast and fibroblast bone cells", Journal of Interscience, 491-499, 2007
|
|
S. Mollazadeh, J. Javadpour, A. Khavandi, “In situ synthesis and characterization of nano-size hydroxypatite in poly matrix”, Ceramics int., 2006
|
|
R. Shahbazi, J. Javadpour, A. R. Khavandi, “Effect of nanosized reinforcement particles on mechanical properties of high density polyethylene-hydroxy apitite composites”, Advances in applied ceramics, No. 5, 2006
|
|
S. Sh. Homaiegohar, A. Yari Sadi, J. Javadpour, A. Khavandi, “The effect of reinforcement volume fraction and particle size on the mechanical properties of b -tricalcium phosphate-high density polyethylene composites ”, J. of the Eur. Cer. Soc., No. 26, pp. 273-278, 2006
|
|
A. Yari Sadi, M. A. Shokrgozar, S. Sh. Homaiegohar, M. Hosseinalipour, A. Khavandi, J. Javadpour, “The effect of partially stabilized Zirconia on the biological properties of HA/HDPE composites in vitro”, J of materials Sci., 2006
|
|
S. Sh. Hosmaigohar, M. A. Shokrgozar J. Javadpour, A. Khavandi, A. Yari Sadi, "Effect of reinforcement particle size on invitro behaviour of b -tricalcium phosphate-reinforced high-density polyethylene: A nord orthopedic composite", J. of biomedicals materials res., 2006
|
|
S. Sh. Homaiegohar, M. A. Shokrgozar, A. Yari Sadi, A. Khavandi, J. Javadpour, M. Hosseinalipour, “In vitro evaluation of biocompatibility of beta-tricalcium phosphate-reinforced high-density polyethylene on orthopedic compostite”, J. of biomedical materials res. Part : A, No. 75A, pp. 14-22, 2005
|
| A. Khavandi, SA. Mirsalehi, "Synthesis of Nano-HA and the effects on the Mechanical Properties of the HA/HMPWPE Nanocomposites", AMPT2014 Advances in Materials and Processing Technologies, Dubai |
| SA. Mirsalehi, A. Khavandi, "Fabrication and in-vitro evaluation of HA/UHMWPE composite as a bone substitude", 4th international conference on composite,…(CCFA-4), Tehran, 2014 |
| S. Bagheri, A. Khavandi, B. Chen, "Effects of blending sequence on morphology and mechanical properties of polypropylene/ethylene-octene copolymer/clay nanocomposites ", 4th international conference on composite,…(CCFA-4), Tehran, 2014 |
| A. Khavandi, M. Sattari, Alizadeh, " Non-isothermal melting behavior of UHMWPE/SCF/Sio2 Composites", 4th international conference on composite,…(CCFA-4), Tehran, 2014 |
| S. Bagheri, A. Khavandi, B. Chen, " Effects of the copolymer structure on the properties of polypropylene/ethylene-octene copolymer/clay nanocomposites", 4th international conference on composite,…(CCFA-4), Tehran, 2014 |
| Mohammad hasan Zamani, M. slavatbakhsh, M. Divandari, M. Tamizifar, A. Khavandi, M. Goodarzi, "Investigation of window process and microstructure in lap joints of aluminum and magnesium light metals produced by friction stir welding", In proceeding of: The second international and the seventh joint conference of Iranian metallurgical engineering and Iranian foundrymen scientific societies, At Semnan,Iran, 2013 |
| Mohammad hasan Zamani, M. slavatbakhsh, M. Divandari, M. Tamizifar, A. Khavandi, M. Goodarzi, " Evaluation of strength increasing in dissimilar joints of Aluminum and Magnesium produced by friction stir lap welding (FSLW) process ", The second international and the seventh joint conference of Iranian metallurgical engineering and Iranian foundrymen scientific societies, Semnan,Iran; 10/2013 |
| H R Pakzaman, A R Khavandi, M Divandari, " A study on aluminum matrix composite reinforced with a two-dimensional network of interconnected steel wires fabricated by lost foam casting ", New and Advanced Material International Congress, Islamic Azad University, Majlesi Branch, May 30-31, 2012, Azad University, Majlesi Branch, May 30-31, 2012,; 01/2012 |
|
B. Azimi, Khavandi, Javadpour, " Environmental effects on mechanical properties of E-glass fiber reinforced unsaturated polyester composites", the international conference on experimental solid mechanics and dynamics-2012, Iran
|
|
T. Dallali Isfahani, J. Javadpoura, R.Dinnebierb, HR. Rezaiea, M. Goodarzi, " Formation Mechanism of Zirconia Nanoparticles Prepared from ZrCl4 and CaO", the International Conference on Nanostructures (ICNS4), Kish, 2012
|
|
S.Bagheri,A. khavandi, Chen, " Effect of the compatibilizer on clay dispersion in polypropylene/clay nanocomposites", ICNST 2012 International conference on nano scince and technology, China, 2012
|
| S.Bagheri, B . Chen, " The compatibilization role of clay in pp/Eoc/pp-G-MA/Eoc-G-MA/clay nano composite", the international conference 0n polymer Behavior (ICPB5 2012), Portugal |
|
O.Bayat, A .Khavandi, R.Ghasemzadeh, " Formation Mechanism of TiCr2 Intemetallic by Calciothermic co-reduction Method", New and Advanced Material International Congress, Isfahan, 2012
|
| Z. Aslani, A. Khavandi, M. Tamizifar, Ghasemi, " perparation and mechanical evalution of nano composite based on pp-uhmwpe/beta -tricalcium phosphate", the international conference nanostructures and nanomaterials: science and application, Iran, 2012 |
| Z. Noori, A. Khavandi, M. Divandari, " The influence of nickel coating thickness on interlayer morphology of steel wires in A432 matrix composite via lost foam casting", The internationl cinference on experimental solid mechanics and dynamics, Tehran, 2012 |
| H R Pakzaman, M Divandari, A R Khavandi, " Effect of nickel coating on steel wire reinforcement on mechanical properties of aluminum matrix composites produced via lost foam casting ", Proceedings of Iran International Aluminum Conference (IIAC2012), May 15-16, 2012, Arak, I.R. Iran; 01/2012 |
|
T. Dallali Isfahani, J.Javadpour, A.Khavandi, R.Dinnebier, " Mechanochemical synthesis and characterization of al2o3 nano powder", 3rd international conference on ultrafine grainedand nanostructured mateials, 2011
|
|
H.Sharifi, M.Divandari, A.Khavandi, Idris, " Effect of addetive materials on the foaming behavior cell structure and mecanical properties oe AL2O3- ZrO2", 10th Manufacturing Engineering Iranian Conference, 2010, Babol
|
| A. Khavandi,A. kamali, M. Bolouri, " Study of mechanical properties of pultruded polymer matrix composites (PMCs) and the application of composite cross-arms in medium voltage power delivery lines", The 2nd International Conference on Composites, Kish, 2010 |
| Khavandi- Javadpour-Tcharkhtchi, " An Investigation on The Effect Of Sonication Time and Dispersing Medium on the Mechanical Properties of Mcessing Technologies(AMPT09(WNTSin MWCNT/Ly 560 Nanocomposites", Advances in Materials and Processing Technologies, Malaysia, 2009 |
|
T. Dallali Isfahani, J.Javadpour, A.Khavandi, H.Rezaie, " MECHANOCHEMICAL SYNTHESIS OF ALUMINA- ZIRCONIA NANOCOMPOSITE", Fundamental Bases of Mechanochemical Technologies «»III International Conference, Russia, 2009
|
| Khavandi, M. Bagheri, Karami, " Synthesis of B-TCP Nanipowders in Chemical Precipitation Method for Biomedical Application", Advances in Materials and Processing Technologies, Malaysia, 2009 |
| Khavandi- Javadpour- Shokrgozar- Imani, " fabrication and characterization of poly - nano hydroxyapatite composite scaffolds", nano composites, Dubai, 2008 |
| Bagheri, Khavandi, Kharrazi, " effects of mixing the steel and carbon fibers on the friction and wear properties of a pmc brake pads", First int. conf. on composites , Kish, 2008 |
|
S. Mollazadeh, J. Javadpour, A. R. Khavandi, “Mechanical properties of In-situ processed hydroxyapatite / polyvinyl/ alchohol nanocomposites”, First int. cong. on nanoscience, 2006
|
|
/khavandi.jpg)
iust.ac.ir