---

An efficient method for size and layout optimization of the truss structures is presented in this paper. In order to this, an efficient method by combining an improved discrete particle swarm optimization (IDPSO) and method of moving asymptotes (MMA) is proposed. In the hybrid of IDPSO and MMA, the nodal coordinates defining the layout of the structure are optimized with MMA, and afterwards the results of MMA are used in IDPSO to optimize the cross-section areas. The results show that the hybrid of IDPSO and MMA can effectively accelerate the convergence rate and can quickly reach the optimum design.

---

This study focuses on the shape optimization of concrete gravity dams considering dam–water–foundation interaction and nonlinear effects subject to earthquake. The concrete gravity dam is considered as a two–dimensional structure involving the geometry and material nonlinearity effects. For the description of the nonlinear behavior of concrete material under earthquake loads, the Drucker–Prager model based on the associated flow rule is adopted in this study. The optimum design of concrete gravity dams is achieved by the hybrid of an improved gravitational search algorithm (IGSA) and the orthogonal crossover (OC), called IGSA–OC. In order to reduce the computational cost of optimization process, the support vector machine approach is employed to approximate the dam response instead of directly evaluating it by a time–consuming finite element analysis. To demonstrate the nonlinear behavior of concrete material in the optimum design of concrete gravity dams, the shape optimization of a real dam is presented and compared with that of dam considering linear effect.

---

The paper deals with the reliability–based design optimization (RBDO) of concrete gravity dams subjected to earthquake load using subset simulation. The optimization problem is formulated such that the optimal shape of concrete gravity dam described by a number of variables is found by minimizing the total cost of concrete gravity dam for the given target reliability. In order to achieve this purpose, a framework is presented whereby subset simulation is integrated with a hybrid optimization method to solve the RBDO approach of concrete gravity dam. Subset simulation with Markov Chain Monte Carlo (MCMC) sampling is utilized to estimate accurately the failure probability of dams with a minimum number of samples. In this study, the concrete gravity dam is treated as a two–dimensional structure involving the material nonlinearity effects and dam–reservoir–foundation interaction. An efficient metamodel in conjunction with subset simulation–MCMC is provided to reduce the computational cost of dynamic analysis of dam–reservoir–foundation system. The results demonstrate that the RBDO approach is more appropriate than the deterministic optimum approach for the optimal shape design of concrete gravity dams.

---

This study focuses on the topology optimization of structures using a hybrid of level set method (LSM) incorporating sensitivity analysis and isogeometric analysis (IGA). First, the topology optimization problem is formulated using the LSM based on the shape gradient. The shape gradient easily handles boundary propagation with topological changes. In the LSM, the topological gradient method as sensitivity analysis is also utilized to precisely design new holes in the interior domain. The hybrid of these gradients can yield an efficient algorithm which has more flexibility in changing topology of structure and escape from local optimal in the optimization process. Finally, instead of the conventional finite element method (FEM) a Non–Uniform Rational B–Splines (NURBS)–based IGA is applied to describe the field variables as the geometry of the domain. In IGA approach, control points play the same role with nodes in FEM, and B–Spline functions are utilized as shape functions of FEM for analysis of structure. To demonstrate the performance of the proposed method, three benchmark examples widely used in topology optimization are presented. Numerical results show that the proposed method outperform other LSMs.

---

Tuned  mass  dampers  (TMDs)  are  as  a  efficient  control  tool  in  order  to  reduce  undesired vibrations  of  tall  buildings  and  large–span  bridges  against  lateral  loads  such  as  wind  and earthquake. Although many researchers has been widely  investigated  TMD systems  due to its  simplicity  and  application,  the  optimization  of  parameters  and  placement  of  TMD  are challenging tasks. Furthermore, ignoring the effects of soil–structure interaction (SSI) may lead to unrealistic desig of structure and its dampers. Hence, the  effects of SSI should be considered  in  the  design  of  TMD.  Therefore,  the  main  aim  of  this  study  is  to  optimize parameters  of  TMD  subjected  to  earthquake  and  considering  the  effects  of  SSI.  In  this regard,  the  parameters  of  TMD  including  mass,  stiffness  and   damping  optimization  are considered  as  the  variables  of  optimization.  The  maximum  absolute  displacement  and acceleration of structure are also simultaneously selected as objective functions. The multi –objective particle  swarm optimization  (MOPSO) algorithm  is adopted  to find  the  optimal parameters  of  TMD.  In  this  study,  the  Lagrangian  method  is  utilized  for  obtaining  the equations of motion for SSI system, and the time domain analysis is implemented based on Newmark method. In order to investigate the effects of SSI in the optimal design of TMD, a 40 storey shear building with a TMD subjected to the El–Centro earthquake is considered. The  numerical  results  show  that  the  SSI  effects  have  the  significant  influence  on  the optimum parameters of TMD.

---

This study investigates the prediction model of compressive strength of self–compacting concrete (SCC) by utilizing soft computing techniques. The techniques consist of adaptive neuro–based fuzzy inference system (ANFIS), artificial neural network (ANN) and the hybrid of particle swarm optimization with passive congregation (PSOPC) and ANFIS called PSOPC–ANFIS. Their performances are comparatively evaluated in order to find the best prediction model. In this study, SCC mixtures containing different percentage of nano SiO₂ (NS), nano–TiO₂ (NT), nano–Al₂O₃ (NA), also binary and ternary combining of these nanoparticles are selected. The results indicate that the PSOPC–ANFIS approach in comparison with the ANFIS and ANN techniques obtains an improvement in term of generalization and predictive accuracy. Although, the ANFIS and ANN techniques are a suitable model for this purpose, PSO integrated with the ANFIS is a flexible and accurate method due tothe stronger global search ability of the PSOPC algorithm.

---

This paper presents the topology optimization of plane structures using a binary level set (BLS) approach and isogeometric analysis (IGA). In the standard level set method, the domain boundary is descripted as an isocountour of a scalar function of a higher dimensionality. The evolution of this boundary is governed by Hamilton–Jacobi equation. In the BLS method, the interfaces of subdomains are implicitly represented by the discontinuities of BLS functions taking two values 1 or −1. The subdomains interfaces are represented by discontinuities of these functions. Using a two–phase approximation and the BLS approach the original structural optimization problem is reformulated as an equivalent constrained optimization problem in terms of this level set function. For solving drawbacks of the conventional finite element method (FEM), IGA based on a Non–Uniform Rational B–Splines (NURBS) is adopted to describe the field variables as the geometry of the domain. For this purpose, the B–Spline functions are utilized as the shape functions of FEM for analysis of structure and the control points are considered the same role with nodes in FEM. Three benchmark examples are presented to investigate the performance the topology optimization based on the proposed method. Numerical results demonstrate that the BLS method with IGA can be utilized in this field.

---

Many researches have focused on the optimal design of tuned mass damper (TMD) system without the effect of soil–structure interaction (SSI), so that ignoring the effect of SSI may lead to an undesirable and unrealistic design of TMD. Furthermore, many optimization criteria have been proposed for the optinal design of the TMD system. Hence, the main aim of this study is to compare different optimization criteria for the optimal design of the TMD system considering the effects of SSI in a high–rise building. To acheive this purpose, the optimal TMD for a 40–storey shear building is firstly evaluated by expressing the objective functions in terms of the reduction of structural responses (including the displacement and acceleration) and the limitation of the scaled stroke of TMD. Then, the best optimization criterion is selected, which leads to the best performance for the vibration control of the structure. In this study, the whale optimization algorithm (WOA) is employed to optimize the parameters of the TMD system. The numerical results show that the soil type and selected objective function efficiently affect the optimal design of the TMD system.

---

Flow number of asphalt–aggregate mixtures as an explanatory factor has been proposed in order to assess the rutting potential of asphalt mixtures. This study proposes a multiple–kernel based support vector machine (MK–SVM) approach for modeling of flow number of asphalt mixtures. The MK–SVM approach consists of weighted least squares–support vector machine (WLS–SVM) integrating two kernel functions in order to improve the learning and generalization ability of WLS–SVM. In the proposed method, a linear convex combination of the radial basis function (RBF) and Morlet wavelet kernel functions is adopted, which are considered as the most popular kernel functions. To validate the efficiency of the proposed method, experiments are conducted on a database including 118 uniaxial dynamic creep test results. The results of the statistical criteria show a good agreement between the predicted and measured flow number values. Further, the simulation results demonstrate that the proposed MK–SVM approach has more superior performance than the single kernel based WLS–SVM and other methods found in the literature.

---

Active tuned mass damper (ATMD) systems have attracted the considerable attention of researchers for protecting buildings subjected to earthquake loading. This paper presentes the development of an optimal sliding mode control (OSMC) system for a building equipped with ATMD. In the OSMC technique, a linear sliding surface is used with the slope of this surface designed such that a given (or desired) cost function is minimized. The design is obtained by transforming the system into the regular form. In the regular form, the system is divided into two subsystems inclding: a control term explicitly appears, and other control terms do not appear. In order to demonstrate the capability of the OSMC system, an 11–story realistic building with a TMD installed on the top story of the structure is considered. For achieving this purpose, four well–known earthquake records are selected to evaluate the performance of the OSMC system. Results show that the OSMC technique performs better than other control techniques in the reduction of seismic responses of the structure.

---

The present study proposes a hybrid of the piecewise constant level set (PCLS) method and isogeometric analysis (IGA) approach for structural topology optimization. In the proposed hybrid method, the discontinuities of PCLS functions is used in order to present the geometrical boundary of structure. Additive Operator Splitting (AOS) scheme is also considered for solving the Lagrange equations in the optimization problem subjected to some constraints. For reducing the computational cost of the PCLS method, the Merriman–Bence–Osher (MBO) type of projection scheme is applied. In the optimization process, the geometry of structures is described using the Non–Uniform Rational B–Splines (NURBS)–based IGA instead of the conventional finite element method (FEM). The numerical examples illustrate the efficiency of the PCLS method with IGA in the efficiency, convergence and accuracy compared with the other level set methods (LSMs) in the framework of 2–D structural topology optimization. The results of the topology optimization reveal that the proposed method can obtain the same topology in lower number of convergence iteration.