---

In this article, an efficient methodology is presented to optimize the topology of structural systems under transient loads. Equivalent static loads concept is used to deal with transient loads and to solve an alternate quasi-static optimization problem. The maximum strain energy of the structure under the transient load during the loading interval is used as objective function. The objective function is calculated in each iteration and then the dynamic optimization problem is replaced by a static optimization problem, which is subsequently solved by a convex linearization approach combining linear and reciprocal approximation functions. The optimal layout of a deep beam subjected to transient loads is considered as a case study to verify the effectiveness of the presented methodology. Results indicate that the optimal layout is dependant of the loading interval.

---

The present study encompasses a new method to simultaneous analysis, design and optimization of Water Distribution Systems (WDSs). In this method, analysis procedure is carried out using Charged System Search (CSS) optimization algorithm. Besides design and cost optimization of WDSs are performed simultaneous with analysis process using a new objective function in order to satisfying the analysis criteria, design constraints and cost optimization. Comparison of achieved results clearly signifies the efficiency of the present method in reducing the WDSs construction cost and computational time of the analysis. These comparisons are made for three benchmark practical examples of WDSs.

---

This paper describes the application of the recently developed metaheuristic algorithm for simultaneous analysis, design and optimization of Water Distribution Systems (WDSs). In this method, analysis is carried out using Colliding Bodies Optimization algorithm (CBO). The CBO is a population-based search approach that imitates nature’s ongoing search for better solutions. Also, design and cost optimization of WDSs are performed simultaneous with analysis process using a new objective function in order to satisfying the analysis criteria, design constraints and cost optimization. A number of practical examples of WDSs are selected to demonstrate the efficiency of the presented algorithm. Comparison of obtained results clearly signifies the efficiency of the CBO method in reducing the WDSs construction cost and computational time of the analysis.

---

This paper presents a Multi-Objective Evolutionary Algorithm based on Decomposition (MOEA/D) for the optimal operation of a complex multipurpose and multi-reservoir system. Firstly, MOEA/D decomposes a multi-objective optimization problem into a number of scalar optimization sub-problems and optimizes them simultaneously. It uses information of its several neighboring sub-problems for optimizing each sub-problem. This simple procedure makes MOEA/D have lower computational complexity compared with non-dominated sorting genetic algorithm II (NSGA-II). The algorithm (MOEA/D) is compared with the Genetic Algorithm (NSGA-II) using a set of common test problems and the real-world Zohre reservoir system in southern Iran. The objectives of the case study include water supply of minimum flow and agriculture demands over a long-term simulation period. Experimental results have demonstrated that MOEA/D can improve system performance to reduce the effect of drought compared with NSGA-II superiority. Therefore, MOEA/D is highly competitive and recommended to solve multi-objective optimization problems for water resources planning and management.

---

To deal with severe drought when water supply is insufficient hedging rule, based on hedging rule curve, is proposed. In general, in discrete hedging rules, the rationing factors have changed from a zone to another zone at once. Accordingly, this paper is an attempt to improve the conventional hedging rule to control the changes of rationing factors. In this regard, the simulation model has employed a fuzzy approach, and this causes rationing factor changing during a long term simulation gradually. To optimize different parameters of the purposed hedging a Multi-objective Particle Swarm Optimization (MOPSO) algorithm has been considered. The minimum of two objectives Modified Shortage Index (MSI) involving water supply of minimum flow and agriculture demands can be taken as the optimization objectives. The results of the proposed hedging rule indicate long term and annual MSI values have considerably improved compared to the conventional hedging rule. This determines that the proposed method is promising and efficient to mitigate the water shortage problem.

---

The interbasin water transfer is a remedy to mitigate the negative issues of water shortage in arid and semi-arid regions. In  a water transfer project  the receiving basin always  benefits while, the sending basin may suffer. In this study, the project of interbasin water transfer from Dez water resources system in south-west of Iran to the central part of the contrary is 
investigated during a drought period. To this end, a multi-objective optimization model is developed  based  on  the  Non  Dominated  Sorting  Genetic  Algorithm  (NSGA-II).  The optimum trade-off between the water supply benefits into and out of the Dez River basin as well  as  energy  production  is  derived.  Formulating  the  problem  as  a  multi-objective 
optimization provides a better insight into the gains and losses of a water transfer project. Analyzing the case study, revealed that to reach an acceptable level of reliability for meeting the water demands it is no longer possible to generate hydropower energy with high levels of reliability. 

---

In this study, the recently developed method, Tug of War Optimization (TWO), is employed for simultaneous analysis, design and optimization of Water Distribution Systems (WDSs). In this method, analysis procedure is carried out using Tug of War Optimization algorithm. Design and cost optimization of WDSs are performed simultaneous with analysis process using an objective function in order to satisfying the analysis criteria, design constraints and cost optimization. A number of practical examples of WDSs are selected to demonstrate the efficiency of the presented algorithm. The findings of this study clearly signify the efficiency of the TWO algorithm in reducing the water distribution networks construction cost.

---

In this paper, the bi-directional evolutionary structural optimization (BESO) method is used to find optimal layouts of 3D prestressed concrete beams. Considering the element sensitivity number as the design variable, the mathematical formulation of topology optimization is developed based on the ABAQUS finite element software package. The surface-to-surface contact with a small sliding between concrete and prestressing steels is assumed to accurately model the prestressing effects. The concrete constitutive model used is the concrete damaged plasticity (CDP) model in ABAQUS. The integration of the optimization algorithm and finite element analysis (FEA) tools is done by using the ABAQUS scripting interface. A pretensioned prestressed simply supported beam is modeled to show capabilities of the proposed method in finding optimal topologies of prestressed concrete beams. Many issues relating to topology optimization of prestressed concrete beams such as the effects of prestressing stress, geometrical discontinuities and height constraints on optimal designs and strut-and-tie models (STMs) are studied in the example. The results show that the proposed method can efficiently be used for layout optimization of prestressed concrete beams.

---

In this research, the optimization problem of the steel-concrete composite I-girder bridges is investigated. The optimization process is performed using the pattern search algorithm, and a parallel processing-based approach is introduced to improve the performance of this algorithm. In addition, using the open application programming interface (OAPI), the SM toolbox is developed. In this toolbox, the OAPI commands are implemented as MATLAB functions. The design variables represent the number and dimension of the longitudinal beam and the thickness of the concrete slab. The constraints of this problem are presented in three steps. The first step includes the constraints on the web-plate and flange-plate proportion limits and those on the operating conditions. The second step consists of considering strength constraints, while the concrete slab is not yet hardened. In the third step, strength and deflection constraints are considered when the concrete slab is hardened. The AASHTO LRFD code (2007) for steel beam design and AASHTO LRFD (2014) for concrete slab design are used. The numerical examples of a sloping bridge with a skew angle are presented. Results show that active constraints are those on the operating conditions and component strength and that in terms of CPU time, a 19.6% improvement is achieved using parallel processing.

---

This article presents numerical studies on semi-active seismic response control of structures equipped with Magneto-Rheological (MR) dampers. A multi-layer artificial neural network (ANN) was employed to mitigate the influence of time delay, This ANN was trained using data from the El-Centro earthquake. The inputs of ANN are the seismic responses of the structure in the current step, and the outputs are the MR damper voltages in the current step. The required training data for the neural controller is generated using genetic algorithm (GA). Using the El-Centro earthquake data, GA calculates the optimal damper force at each time step. The optimal voltage is obtained using the inverse model of the Bouc-Wen based on the predicted force and the corresponding velocity of the MR damper. This data is stored and used to train a multi-layer perceptron neural network. The ANN is then employed as a controller in the structure. To evaluate the efficiency of the proposed method, three- story, seven- story and twenty-story structures with a different number of MR dampers were subjected to the Kobe, Northridge, and Hachinohe earthquakes. The maximum reduction in structural drifts in the three-story structure are 13.05%, 39.90%, 15.89%, and 8.21%, for the El-Centro, Hachinohe, Kobe, and Northridge earthquakes, respectively. As the control structure is using a pre-trained neural network, the computation load in the event of an earthquake is extremely low. Additionally, as the ANN is trained on seismic pre-step data to predict the damper's current voltage, the influence of time lag is also minimized.

---

Energy production and consumption play an important role in the domestic and international strategic decisions globally. Monitoring the electric energy consumption is essential for the short- and long-term of sustainable development planned in different countries. One of the advanced methods and/or algorithms applied in this prediction is the meta-heuristic algorithm. The meta-heuristic algorithms can minimize the errors and standard deviations in the data processing. Statistically, there are numerous methods applicable in the uncertainty analysis and in realizing the errors in the datasets, if any. In this article, the Mean Absolute Percentage Error (MAPE) is used in the error’s minimization within the relevant algorithms, and the used dataset is actually relating to the past fifty years, say from 1972 to 2021. For this purpose, the three algorithms such as the Imputation–Regularized Optimization (IRO), Colliding Bodies Optimization (CBO), and Enhanced Colliding Bodies Optimization (ECBO) have been used. Each one of the algorithms has been implemented for the two linear and exponential models. Among this combination of the six models, the linear model of the ECBO meta-heuristic algorithm has yielded the least error. The magnitude of this error is about 3.7%. The predicted energy consumption with the winning model planned for the year 2030 is about 459 terawatt-hours. The important socio-economical parameters are used in predicting the energy consumption, where these parameters include the electricity price, Gross Domestic Product (GDP), previous year's consumption, and also the population. Application of the meta-heuristic algorithms could help the electricity generation industries to calculate the energy consumption of the approaching years with the least error. Researchers should use various algorithms to minimize this error and make the more realistic prediction.
 

---

In this study, the response of semi-actively controlled structures is investigated, with a focus on the effects of magneto-rheological (MR) damper distribution on the seismic response of structures such as drift and acceleration. The proposed model is closed loop, and the structure's response is used to determine the optimal MR damper voltage. A Fuzzy logic controller (FLC) is employed to calculate the optimum voltage of MR dampers. Drifts and velocities of the structure’s stories are used as FLC inputs. The FLC parameters and the distribution of MR dampers across stories are determined using the NSGA-II, when the structure is subjected to the El-Centro earthquake, so as to minimize the peak inter-story drift ratio and peak acceleration simultaneously. The efficiency of the proposed approach is illustrated through a twenty-story nonlinear benchmark structure. Non-dominated solutions are obtained to minimize the inter-story drift and acceleration of structures and Pareto front produced. Then, the non-dominated solutions are used to control the seismic response of the benchmark structure, which was subjected to the Northridge, Kobe, and Hachinohe earthquake records. In the numerical example the maximum drift and acceleration decrease by about 36.3% and 15%, respectively, in the El-Centro earthquake. The results also demonstrate that the proposed controller is more efficient in reducing drift than reducing acceleration.
 

---

This study uses an elitist Genetic Algorithm (GA) to optimize material costs in one-way reinforced concrete slabs, adhering to ACI 318-19. A sensitivity analysis demonstrated the critical role of elitism in GA performance. Without elitism, the GA consistently failed to reach the target objective, with success rates often nearing zero across various crossover fractions. Incorporating elitism dramatically increased success rates, highlighting the importance of preserving high-performing individuals. With an optimal configuration of 0.3 crossover fraction and 0.45 elite percentage, a 92% success rate was achieved, finding a cost of 24.91 in 46 of 50 runs for a simply supported slab. This optimized design, compared to designs based on ACI 318-99 and ACI 318-08, yielded material cost savings of between 5.8% to 8.6% for simply supported, one-end continuous, both-ends continuous, and cantilevered slabs. The influence of slab dimensions on cost was evaluated across 64 scenarios, varying slab lengths from 5 to 20 feet for each support condition. Resulting cost versus slab length diagrams illustrate the economic benefits of GA optimization.