Search published articles


Showing 2 results for Effect of Temperature

H. Rafiee*,, S. Rastegari, H. Arabi, M. Mojaddami,
Volume 7, Issue 4 (10-2010)
Abstract

Abstract:

activity gas diffusion process has been investigated in this research. Effects of coating temperature and aluminum

concentration in powder mixture on formation mechanism were studied using optical and scanning electron

microscopes, EDS and X-ray diffraction (XRD) techniques. For this purpose two different packs containing 1 and 2

wt% aluminum powder, were used for coating the samples at two temperatures, 850ºC and 1050ºC. The ratio of Al to

activator was kept constant in both packs. By increasing the Al content in high activity powder mixture, the

concentration of diffused Al increased in the coating layers, and the thickness of coating increased. At 1050ºC as the

rate of diffused Al to the interdiffusion zone increased, this zone gradually transformed to outer coating phases. At

850ºC coating formed by inward diffusion of Al, but at 1050ºC it was initially formed by inward diffusion of Al followed

by outward diffusion of Ni.

Formation mechanism of an aluminide coating on a nickel base superalloy IN738LC via a single step high

Tumelo Moloi, Thywill Cephas Dzogbewu, Maina Maringa, Amos Muiruri,
Volume 21, Issue 3 (9-2024)
Abstract

The stability of microstructure at high temperatures is necessary for many applications. This paper presents investigations on the effect of changes in temperature on the microstructures of additively manufactured Ti6Al4V(ELI) alloy, as a prelude to high temperature fatigue testing of the material. In the present study, a Direct Metal Laser Sintering (DMLS) EOSINT M290 was used to additively manufacture test samples. Produced samples were stress relieved and half of these were then annealed at high temperatures. The samples were then heated from room temperature to various temperatures, held there for three hours and thereafter, cooled slowly in the air to room temperature. During tensile testing, the specimens was heated up to the intended test temperature and held there for 30 minutes, and then tensile loads applied to the specimens till fracture. Metallographic samples were then prepared for examination of their microstructures both at the fracture surfaces and away from them. The obtained results showed that changes in temperature do have effects on the microstructure and mechanical properties of Ti6Al4V(ELI) alloy. It is concluded in the paper that changes in temperature will affect the fatigue properties of the alloy.

Page 1 from 1     

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb