Search published articles

Showing 3 results for Marghussian

Eftekhari-Yekta B., Marghussian V.k.,
Volume 2, Issue 2 (Jan 2005)

The effect of precipitation of ?.qss. and gahnite phases during heat treatment of glass frits in the ZnO-Al2O3-SiO2 system on the mechanical property of resulting glass-ceramic specimens were investigated. It was shown that gahnite glass-ceramics had higher bend strength and toughness values than ?.qss. ones. The results are attributed to the higher modulus of elasticity as well as higher thermal expansion coefficient of gahnite relative to the residual glass phase.
M. Rezvani, B. Eftekhari Yekta, V. K. Marghussian,
Volume 5, Issue 1 (winter 2008 2008)

Abstract: The application of inexpensive materials such as copper, zinc, lead, iron and steel slag in manufacturing of glass and glass-ceramic products in construction industry, lining materials as anti-corrosion and anti-abrasion coatings in metals and etc, has led to considerable progress in glass technology in recent years. The composition of slag glass-ceramics is mainly located in the SiO2-Al2O3-CaO-MgO system, in which one of the most important problems is the lack of bulk crystallization. To resolve the above-mentioned problem, the crystallization behavior of various compositions containing different nucleating agents Cr2O3 , Fe2O3 and TiO2 in the single, double and triple forms were studied by differential thermal analysis (DTA).The precipitated crystalline phases was determined by the X-ray diffractometry and the micro-structural analysis was studies using the SEM micrographs. The three point bending strength, micro-hardness and the chemical resistance of the best composition were determined. According to the results, the resulted glassceramic had a better specification than the stoneware floor tiles and the porcelain one, which are considered as the two important competitors for it.
P. Shahsavari, B. Eftekhari Yekta, V. Marghussian,
Volume 17, Issue 3 (September 2020)

Strong glass-ceramic foams with a compressive strength of 20 MPa were prepared by adding various amounts of Fe2O3 to a soda lime-based glass composition, and SiC as a foaming agent. The foams were prepared by firing the compacted samples in the range of 750–950°C for different soaking times. The crystallization behavior of the samples was investigated by Simultaneous Thermal Analysis (STA), Scanning Electron Microscope, and X-Ray Diffractometer (XRD). Based on the results, solid solutions of pyroxene groups were crystallized by the surface mechanism, between 730˚C and 900˚C during the firing of the specimens, and their amounts increases with increasing of the added iron oxide. Besides, we found that Fe2O3 neither acts as a nucleant for pyroxene nor as an oxidizer for SiC. The results also showed that the compressive strength as well as the crystallization behavior of the foams was influenced by the presence of the SiC particles.

Page 1 from 1     

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb