Volume 1, Issue 1 (Oct 2004)                   IJMSE 2004, 1(1): 9-15 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
MIR HABIBI A.R., MIR HABIBI A.R., MIR HABIBI A.R.. THE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS. IJMSE 2004; 1 (1) :9-15
URL: http://ijmse.iust.ac.ir/article-1-91-en.html
THE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS
MIR HABIBI A.R. , MIR HABIBI A.R. , MIR HABIBI A.R.
Abstract:   (39383 Views)
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the thickness of nickel coating on surface condition and also the tensile strength of the carbon fibers has been investigated. The study of surface condition of the coated carbon fibers by SEM showed that the nickel coating at the thickness of about 0.5 pin has the best continuity oil the carbon fibers. The results of tensile tests of carbon fibers coated with different thickness of nickel showed that increasing the thickness of coating layer decreases the overall strength of fibers.
Keywords: Carbon fibers, Nickel coating, Surface condition, Tensile strength
     
Type of Study: Research Paper | Subject: Ceramics
Add your comments about this article : Your username or Email:
CAPTCHA
Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb