Iranian Journal of Materials Science and Engineering
Iran University of Science & Technology
Mon, Sep 2, 2024
[Archive]
Volume 17, Issue 3 (September 2020)
IJMSE 2020, 17(3): 1-10 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Shahsavari P, Eftekhari Yekta B, Marghussian V. High Strength Pyroxene-Based Glass- Ceramic Foams in the Presence of Fe2O3. IJMSE 2020; 17 (3) :1-10
URL: http://ijmse.iust.ac.ir/article-1-1823-en.html
URL: http://ijmse.iust.ac.ir/article-1-1823-en.html
Abstract: (8105 Views)
Strong glass-ceramic foams with a compressive strength of 20 MPa were prepared by adding various amounts of Fe2O3 to a soda lime-based glass composition, and SiC as a foaming agent. The foams were prepared by firing the compacted samples in the range of 750–950°C for different soaking times. The crystallization behavior of the samples was investigated by Simultaneous Thermal Analysis (STA), Scanning Electron Microscope, and X-Ray Diffractometer (XRD). Based on the results, solid solutions of pyroxene groups were crystallized by the surface mechanism, between 730˚C and 900˚C during the firing of the specimens, and their amounts increases with increasing of the added iron oxide. Besides, we found that Fe2O3 neither acts as a nucleant for pyroxene nor as an oxidizer for SiC. The results also showed that the compressive strength as well as the crystallization behavior of the foams was influenced by the presence of the SiC particles.
Type of Study: Research Paper |
Subject:
Ceramics
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
