دکتر مرتضی تمیزی فر

AWT IMAGE

دکتر مرتضی تمیزی فر

رتبه علمی : دانشیار

محل تحصیل:  ‌انگلستان، دانشگاه یومیست منچستر

آخرین مدرک تحصیلی: دکترا - مهندسی مواد و متالورژی

سال اخذ مدرک تحصیلی: 1370 هجری شمسی

زمینه‌های تدریس:

متالورژی پودر

زمینه تحقیقاتی مورد علاقه:

متالورژی فیزیکی و متالورژی پودر ، مهندسی پزشکی


      

  مقالات چاپ شده در مجلات علمی – لاتین

Kiani, F., Razzaghi, Z., Ghadiani, B., Tamizifar, M., Mohmmadi, M.H., Simchi, A., "Self-limited growth of large-area monolayer graphene films by low pressure chemical vapor deposition for graphene-based field effect transistors", Ceramics International, Volume 43, Issue 17, 1 December 2017, Pages 15010-15017
Ataei, A., Jalaly, M., Tamizifar, M., "Surface hardening of tungsten-based heavy alloy via pack boronizing", Iranian Journal of Materials Science and Engineering, Volume 14, Issue 1, March 2017, Pages 58-68
Yousefieh, M., Tamizifar, M., Boutorabi, S.M.A., Borhani, E., "Taguchi Optimization on the Initial Thickness and Pre-aging of Nano-/Ultrafine-Grained Al-0.2 wt.%Sc Alloy Produced by ARB", Journal of Materials Engineering and Performance, Volume 25, Issue 10, 1 October 2016, Pages 4239-4248
Derakhshi, Z., Tamizifar, M., Arzani, K., Baghshahi, S., "Synthesis and Characterization of LaCoxFe1-xO3 (0≤x≤1) Nano-Crystal Powders by Pechini Type Sol-Gel Method", Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, Volume 46, Issue 1, 2 January 2016, Pages 25-30
Khanfekr, A., Tamizifar, M., Naghizadeh, R., "Effects of a donor concentration on the structure of Nb-doped nano-sized BaTiO3 powders prepared by microwave-hydrothermal synthesis methods", Journal of Structural Chemistry, Volume 57, Issue 1, 1 January 2016, Pages 181-187
Khanfekr, A., Tamizifar, M., Naghizadeh, R., "Microwave-hydrothermal synthesis of Nb-doped BaTiO3 nanoparticles under various conditions",Surface Engineering and Applied Electrochemistry, Volume 51, Issue 5, 1 September 2015, Pages 434-439
Khanfekr, A., Naghizadeh, R., Tamizifar, M., "Microwave and conventional sintering and grain growth behavior of nano-Nb doped BaTiO 3 prepared from microwave hydrothermal powders", Surface Engineering and Applied ElectrochemistryVolume 51, Issue 4, 13 June 2015, Pages 305-312
Khoeini, M., Nemati, A., Zakeri, M., Tamizifar, M., Samadi, H., "Comprehensive study on the effect of SiC and carbon additives on the pressureless sintering and microstructural and mechanical characteristics of new ultra-high temperature ZrB 2 ceramics", Ceramics International, April 19, 2015

Jalaly, M., Bafghi, M.S.-S., Tamizifar, M., Gotor, F.J., "In situ synthesis of a ZrB 2 -based composite powder using a mechanochemical reaction for the zircon/magnesium/boron oxide/graphite system", International Journal of Applied Ceramic Technology, Volume 12, Issue 3, 1 May 2015, Pages 551-559

M. Jalaly, M. Sh. Bafghi, M. Tamizifar, F. J. Gotor, "An investigation on the formation mechanism of nano ZrB2 powder by a magnesiothermic reaction", Journal of alloys and coumpounds, 588, 2014, 36-41
M. Mohammadi Rahvard, M. Tamizifar, M. A. Boutorabi, S. Gholami Shiri, "Effect of superheat and solidified layer on achieving good metallic bond between A390/A356 alloys fabricated by cast-decant-cast process", Trans. Nonferrous Met. Soc. China, 24, 2014, 665-672
M. Jalali, M. Sh. Bafghi, M. Tamizifar, F. J. Gotor, "The role of boron oxide and carbon amounts in the mechanosynthesis of ZrB2-SiC-ZrC nanocomposite via a self-sustaining reaction in the zircon/magnesium/boron oxide/graphite system", Journal of alloys and compounds, 598, 2014, 113-119
M. Mohammadi, M. Tamizifar, S. M. A. Boutorabi, "Characterization of the graded distribution of primary particles and wear behavior in the A390 alloy ring with various Mg contents fabricated by centrifugal casting", Materials and Design, 2013
M. Jalaly, M. Sh. Bafghi, M. Tamizifar, F. J. Gotor, "Mechanosynthesis of nanocrystalline ZrB2 - based powders by mechanically induced self - sustaining reaction method", Advances in Applied Ceramics, 2013
N. Khademian, R. Gholamipour, F. Shahri, M. Tamizifar, "Effet of vanadium substitution for zirconium on the glass forming ability and mechanical properties of a Zr65Cu17Ni10Al7.5 bulk metallic galss", Journal of alloys and compounds, 546, 2013, 41-47
M. Jalaly, M. Sh. Bafghi, M. Tamizifar, "Formation mechanism of ZrB2-Al2O3 nanocomposite powder by mechanically induced self - sustaining reaction", J. Mater Sci., 2013
M. Jalaly, M. Tamizifar, M. Sh. Bafghi, F. J. Gotor, "Mechanochemical synthesis of ZrB2 - SiC - ZrC nanocomposite powder by metallothermic reduction of zircon, 2013
Z. abolghasemi, M. Tamizifar, K. Arzani, A. Nemati, A. Khanfekr, M. Bolandi, "Synthesis of nanocrystalline Ni/Ce-YSZ powder via a polymerization route", Materials Science , 2013
M. Abolfazli, M. Tamizifar, K. Arzani, R. Naghizadeh, "Study the effect of Zirconia to increase the Abrasion resistance and density in Aluminium-Zirconia system", J. Basic Appl. Sci. Res., 2013
M. Zakeri, E. Hasani, M. Tamizifar, "Mechanical properties of TiO2-hydroxyapatite nanostructured coating on Ti-6Al-4V substrates by APS method", Int. J. of Minerals, Metallurgy and Materials, 2013, p. 397
G. Khalaj, H. Yoozbashizadeh, A. Khodabandeh, M. Tamizifar, "Austenite grain growth modelling in weld heat affected zone of Nb/Ti microalloyed linepipe", Minerals Science and Technology, 2013
S. Samani, S. M. Hossainalipour, M. Tamizifar, H. R. Rezaie, "In vitro antibacterial evaluation of sol-gel-derived Zn-, Ag- and (Zn +Ag) - doped hydroxyapatite coating against methicillin-resistant staphylococcus aureus", wiley periodicals, inc. 2012
M. Sharafi, S. Bazgir, M. Tamizifar, A. Nemati, "Adsorption of petroleum hydrocarbons on organoclay", Journal of applied chemical researches, 2010

M. Tamizifar, Investigation of the modification process and morphology of organosilane modified nanoclay, Ceramics-silicate (2009)

M. Tamizifar , Preparation and morphological study of Epoxy/Silane Modified Nanoclay Nanocomposites, Asian Journal of Chemistry, (2009)

M. Tamizifar , Development of a Tungsten heavy alloy, W-Ni-Mn, used as kinetic energy penetrator, Iranian Journal of Materials Science and Engineering (2008)

Kalantary, M. Tamizifar, Mechanical properties of Titanium centrifugal investment casting parts, Med. Center (2008)

Aghababazadeh, Naghizadeh, M. Tamizifar, Pourasad, Mirhabibi, Mahabad, Effect of aging on physical and chemical properties of synthesized Tin Nanopowder, First International Congress on Nanoscience and Nanotechnology (2008)

Zhraii, Arabi, Salehy, M. Tamizifar, Development of Tungsten heavy alloy W-Ni-Mn used as kinetic energy penetrator, Iranian Journal of Materials Science and Engineering, (2008)

S.M. Zahraee, H. Arabi, M.T. Salehi, M. Tamizifar," Effect of Mn/Ni ratio variation on microstructure of W-Ni-Mn alloy", Powder metallurgy, Vol. 51, No. 4, 2008

Hosseini, Arabi, M. Tamizifar , Ziaii , Effects of tensile strength of fatigue behavior and notch sensitivity of Ti-6Al-4V, Iranian Journal of Materials Science and Engineering, (2008)

M. Tamizifar , evaluation the effect of Li2Co5O10 as mill additives on adhesion of coating on steel pipes used in the A238C steel and oil tanks, Journal of Science and Research of color (2008)

B. Eftekhari, M. Tamizifar, N. Rahimi, "Synthesis of Zircon-cadmium sulfo selennide pigment by a sol-gel technique", J. of the ceramic society of Japan, 2007, pp. 757-760

S.M. Zahraee-M.T.Salehi-H.Arabi-M.Tamizifar, "Development of a tungsten heavy alloy, W-Ni-Mn, used as kinetic energy penetrator", Iranian J. of mat. Sci. & Eng., 2007

M. Tamizifar , investigating Optical features and structure of ZnO: Er Nano-layers prepared by Sol Gel Method, Journal of Science and Technology in color (2007)

M. Tamizifar , Preparation of modified nano-clay for use in epoxy - clay nanocomposites, Journal of ceramics , (2007)

Sh. Hosseini, H. Arabi, M. Tamizifar, A. Zeyaie , "Effect of tensile strength of fatigue behaviour and notch sensitivity of Ti-6Al-4V", Iranian J. of material sci. & Eng., Vol. 4, 2006

M. Tamizifar , Influence of Ti-6Al-4V powder nucleation effect on grain size and tensile strength of Eutectic Al-Si alloy, Casting , (2006)

R. Aghababazadeh, B. Mazinani, A. Mirhabibi, M. Tamizifar, "ZnO nanoparticles synthesized by mechanichemical processing", Journal of Physics, Vol. 26, 2006, pp. 312-314

Serajan, Sabagh, M. Tamizifar, Effect of nucleids of Ti-6Al-4V powder on the grain size and strength of eutectic Al-Si alloy, Casting, 27 (2006)

H. A. Akbarzadeh, M. Tamizifar, Sr. Mirdamadi , A. Abdolhossani , " Mechanical properties and microstructures of Zr-microalloyed cast steel ", ISIJ Int. , Vol. 8, 2005, pp. 1201-1204

Naghizadeh, M. Tamizifar , Rezaii, Shahrad, Comparison of properties of casting mass of Spinel-alumina with alumina-MgO, Metallurgy engineering Publication (2005)

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, M. A. Razzazi, "Study of joining mechanism in brass/steel/brass sandwich materials prepared by scratch brushing method", Iranian J. of materials Sci. and Eng., Vol. 1, 2005

H. Aliakbarzadeh, Sh. Mirdamadi, M. Tamizifar, M. R.saleh , " Investigation of hardness and impact toughness of Zr-microalloyed cast steel ", International J. of ISSK , Vol.1, 2005

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, "A study of bonding mechanism in a brass/steel/brass sheet composites", Int. j. of Eng. Sci., Vol. 2, 2005

H. A. Akbarzadeh, M. Tamizifar, Sr. Mirdamadi, A.Abdolhossani, "Mechanical properties and microstructures of Zr-microalloyed cast steel", ISIJ Int., Vol. 8, 2005, pp. 1201-1204

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, M. A. Razzazi, "Study of joining mechanism in brass/steel/brass sandwich materials prepared by scratch brushing method", Iranian J. of materials Sci. and Eng. , Vol. 1, 2005

H. Aliakbarzadeh, Sh. Mirdamadi, M. Tamizifar, M. R. saleh, "Investigation of hardness and impact toughness of Zr-microalloyed cast steel", International J. of ISSK, Vol. 1, 2005

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, "A study of bonding mechanism in a brass/steel/brass sheet composites", Int. j. of Eng. Sci., Vol. 2, 2005

Akbarzadeh, M. Tamizifar, Mirdamadi, Abdolhosseini , Investigating the effect of 0.5 wt.% addition of Zr on low carbon steel, International Journal of Engineering Science (2003)

Arabi, M. Tamizifar , Simin, A Study of bonding mechanism in a brass/steel/brass sheat composite, International Journal of Engineering Science (2003)

Kheyrandish, M. Tamizifar , Evaluation hard soldering parameters on microstructure and mechanical properties of Brass and steel, International Journal of Engineering Science (2003)

M. Tmizifar, Sharafy, Yasreby, Salehpour, Low-power ultrasound wave effects on the growth bone inside the titanium implant channel , Science and research journal, Medicine , (2003)

 M. Tamizifar, Salehy, The effect of processing parameters on shear bands in non isothermal hot forging on Ti-6Al-4V, Material Science & Tech MST (2002)

 M. Tamizifar , Yazdanbakhsh, Causes of failure and long-term relaxation of fully Hip prostheses, new spine (2002)

M. Tamizifar , Omidvar, Salehpour, Effect of temperature and velocity of forging on stiffness and shear bands obtained under non-isothermal forging and variable plane-strain conditions for Ti-6Al-4V alloy , International Journal of Engineering Science (2000)

 M. Tamizifar , Kalantary, Salehpour, Mechanical properties of precision castings assemblies via vacuum centrifugal for pure titanium alloy , International Journal of Engineering Science (2000)

M. Tamizifar , evaluation on Ni based dental alloys synthesizes Materials and metallourgy, (1999)

M. Tamizifar, Khast, Investigating mechanical properties of natural cement before and after adding natural and artificial alloy, Cement Journal (1999)

 M. Tamizifar , Jamshidi, Review on the effect of rare elements and impurities on microstructure and mechanical properties of Al-Li, Aluminium (1997)

M.Tamizifar , Shokuhfar, Ebrahimi, Evaluation and production of parts from WC powder via powder metallurgy , Research (1993)

  مقالات چاپ شده در مجلات علمی – فارسی

محمد یوسفیه, احمد ساعتچی, مرتضی شمعانیان, مرتضی تمیزی فر, "بررسی تأثیر عملیات حرارتی آنیل مرحله ای بر مقاومت به خوردگی حفره ای در لوله های جوش فولاد زنگ نزن سوپر دو فازی", مجله مواد و فناوریهای پیشرفته, ج 2, ش 2, زمستان 92, ص 75-67
مانا نوروزپور، سعید باغشاهی، مرتضی تمیزی فر، ابوالقاسم دولتیف، " بررسی اثر Li2Co5O10   به عنوان افزودنی آسیاب بر چسبندگی میناهای روی فولاد A283 (C) مورد استفاده در لوله ها و مخازن نفتی"،  علوم و فناوری رنگ، 1387

مهدی خوئینی, سعید بازگیر, مرتضی تمیزی فر, ارزانی, " تهیه نانو رس اصلاح شده برای استفاده در نانوکامپوزیت های اپوکسی – رس ", فصلنامه سرامیک ایران , شماره 11, 1386

رخساری آذر, فراشیانی, باغشاهی, تمیزی فر, "بررسی مشخصات نوری و ساختاری نانو لایه های ZnO: Er تهیه شده به روش سل-ژل ", مجله علوم و فناوری رنگ, شماره 1, صفحه 47-41، 1386

علی اکبرزاده, تمیزی فر, میردامادی, عبدالحسینی , " بررسی نقش افزودن 005/0 درصد زیرکونیم، به عنوان یک عنصر میکروآلیاژ به فولاد کم کربن ", مجله بین المللی علوم مهندسی, جلد 4, 1385

زهیر سراجان, بهروز کربلائی, مرتضی تمیزی فر, "تأثیر جوانه زنی پودر Ti-6Al-4V بر اندازه دانه ای و استحکام کششی آلیاژ یوتکتیک Al-Si ", مجله ریخته گری, جلد 27, 1385

رحیم نقی زاده, مرتضی تمیزی فر, حمیدرضا رضائی, سعید شهراد , " مقایسه خواص جرمهای ریختنی آلومینا-اسپینل با آلومینا-منیزیا ", مجله مهندسی متالورژی , جلد 21, 1384

بهزاد طولمی نژاد, حسین عربی, مرتضی تمیزی فر, مهریاب , " بررسی مکانیزم های اتصال در جوش سرد نوردی کامپوزیت سه لایه برنج-فولاد-برنج ", مجله مهندسی جوش, 1384

رحیم نقی زاده, مرتضی تمیزی فر, حمیدرضا رضائی, سعید شهراد, "مقایسه خواص جرمهای ریختنی آلومینا-اسپینل با آلومینا-منیزیا", مجله مهندسی متالورژی, جلد 21, 1384

مرتضی تمیزی فر, علی اکبر شرفی, بهزاد یثربی, زهرا صالحپور, "اثر امواج فراصوتی کم توان بر رشد استخوان در داخل کانال ایمپلانت تیتانیمی", دانشگاه علوم پزشکی ایران, جلد 44, 1383

شهرام خیراندیش, مرتضی تمیزی فر, آرش نخستین, "بررسی اثر پارامترهای لحیم کاری سخت بر ریزساختار و خواص مکانیکی اتصال برنج 10-90 و فولاد نرم AISI1020 ", مجله بین المللی علوم مهندسی, شماره 3, صفحه 215-205، 1382

  مقالات ارائه شده در مجامع علمی – لاتین

Z. Aslani, A. Khavandi, M. Tamizifar, I. Ghasemi, "Preparation and mechanical evaluation of nanocomposite based on PP-UHMWPE/Beta-Tricalcium Phosphate", 1th Int. Conf. on Nanostructures and Nanomaterials: Science and Applications, Iran, 2012, Iran
E. Hassani, M. Zakeri, M. Tamizifar, "Mechanical properties of plasma sprayed TiO2-HA nanostructure coating on the Ti-6Al-4V subsrate", 4th Int. Conf. on Nanostructures, 2012, Iran
M. Mohammadi, M. Tamizifar, M. A. Boutorabi, "Characterization the graded distribution of primary particles in A390 alloy with Mg variable content fabricated by centrifugal casting", Iran Int. Aluminium Conf. 2012
M. H. Taherian, M. Tamizifar, M. H. Fathi, H. Maleki, "Modified sol-gel method for synthesis of hydroxyapatite-bioglass nanocomposite", 4th Int. Conf. on nanostructures (ICNS4), 2012, Iran
M. Khanbeiki, M. Divandari, M. Tamizifar, M. Hasankhani, "Fading of inoculant particles in 8011 aluminium melt in a twin roll casting production line", Iran International Aluminium Conference, 2012
 M. H. Faal Amiri, M. Tamizifar, A. Vaziri, K. Arzani, "Configuration and growth consideration of silicalite-1 nanocrystals via aging and microwave sythesis in clear solution", International conference on nanoscience & technology, China, 2011
S. Sanayei, M. Tamizifar, M. Abbasi, "Evaluation of artifial aging process on corrosion behaviour aluminium 7075 in FSW, 2nd international conference on materials heat treatment, 2011

M. Tamizifar , Preparation of Layer Nano-Silicate / Alumina Castable Composites, 3 rd Conference on Nanostructures (2010)

M. Tamizifar , Usage of modified nano-clay in removing hydrocarbon pollutants from the water environment, 7th Congress of ceramic (2009)

M. Tamizifar , Morophology and properties of organosilane modified nanoclay, International Conference and Exhibition of the European Ceramic Society (2009)

M. Tamizifar , Preparation and morphological study of Epoxy/Silane modified nanoclay nanocomposite, 1 st NANO TODAY CONFERENCE (2009)

M. Tamizifar , The effect of modification in mechanized pulse TIG welding frequency with unbalanced wave on marine alloyed Aluminum joint 5083, International congress on welding (2009)

M. Tamizifar , The effect of ZnO percent on corrosion properties of metallic magnets NdFeB connection field produced by magnetic particles coating, corrosion National Congress (2009)

M. Tamizifar , Effect of electrical current intensity on biological corrosion behavior of titanium alloy coated by hydroxyapatite composite , corrosion National Congress (2009)

 M.Tamizifar , Effect of electrical current intensity on coating properties of composite hydroxyapatite/Ti, 10th national seminar on engineering level, corrosion National Congress (2009)

M. Tamizifar , Effect of layered Nano-Silicate on very low amount casting alumina cement 219, the first National Conference on refractory (2009)

M. Tamizifar , Preparation and study the microstructure of nano-clay used in nano-composite polymer, 7th Congress of ceramic (2009)

M. Tamizifar , improvement of hydroxyapatite coating adhesion to titanium alloy by adding the second phase of titanium, the Seventh Congress of ceramic , 7th Congress of ceramic (2009)

M. Tamizifar , Identification and synthesis of Na-Y zeolite from domestic materials and Iranian Kaolin, the Seventh Congress of ceramic, the Seventh Congress of ceramic, 7th Congress of ceramic (2009)

M. Tamizifar , Effect of adding stabilized zirconia on the microstructure and corrosion resistance and coating assessment of Refractory MgO - spinel, Seventh Congress of ceramic, 7th Congress of ceramic (2009)

M. Tamizifar , Preparation and investigation of morphology of PAN well-alinged carbon nano-fibers prepared by electro-spinning, 7th Congress of ceramic (2009)

M. Tamizifar , Optimization and formulation of manufacturing method of +++ with low dissipation, 7th Congress of ceramic (2009)

M. Khoeini, S.Bazgir, M. Tamizifar, A. Nemati, K. Arzani, " Morphology and thermal properties of epoxy/silane modified nanoclay nanocomposites", The 1th int. conf. on composites: characterization, fabrication and application, 2008

M. Tamizifar , Effect of lubricant and activators on material properties of tungsten, National Conference on Engineering Materials, metallurgy and casting Iran (2008)

M. Tamizifar , microstructure analysis of hard metal alloy influenced by boron carbide growth inhibitors, Joint Conference Seminar of 19th Casting Society of Academic and Annual Congress of Metallurgical and Materials Engineers (2007)

M. Tamizifar , Use flute glasses with silver nano coating layer in solar cells, 8th Conference on Condensed materials, Physics Society of Iran (2007)

M. Tamizifar , Computer simulation of the first phase of the process of iso-static cold pressing powder, The 6th conference of ceramic, Materials and Energy Research (2007)

 M. Tamizifar , Effects of Ir dopant and temperature on the structure - microstructure and optical properties of ZnO nano-layer fabricated by sol - gel method, Fourteenth Conference of Optics and Photonics - University of ValiAsr Rafsanjan (2007)

M. Tamizifar , effect of accumulation of metal nano-layer method coated by magnetron sputtering on the infrared reflectance of glass flute, 8th Conference on Condensed materials, Physics Society of Iran (2007)

 Z.Nematy, M.Tamizifar , Sahba, Computer simulation of the first phase of the process of iso-Static Press, 6th Iranian Ceramic Congress , Tehran (2007)

H. Kalantari-M. Tamizifar , "Mechanical properties of Titanium centrifugal investment casting parts", Rocky mountain bioengineering symposium, Mississippi, 2006

R. Aghababazadeh, F. Naghizadeh, M. Tamizifar, J. Pourasad, A. Mirhabibi, Neda Ameri , "Effect of aging on physical and chemical properties of synthesized tin nanopowder", 2006

Sh. Hosseini, H. Arabi, M. Tamizifar, A. Zeyaie , "Effect of tensile strength of fatigue behaviour and notch sensitibity of Ti-6Al-4V", Iranian J. of material sci. & eng., Vol. 4, 2005

B. Yasrebi, M. Tamizifar, B. A. Sharafi, Z. Salehpoor, "The effect of low-intensity ultrasound on bone growth in the interior of titanium implants", 12 Int. Conf. on biomedical Eng., 2005

M.Tamizifar , Salehpour, H.H. aboutaleby, Nitrogen ion implantation on Ti-6Al-4V surface and study the phase and surface properties, First International Conference of Color Science and Technology, Industrial Institute of Iran Color Research (2005)

A.Akbarzadeh , M.Tamizifar , Mirdamady, Investigating the role of zirconium addition to plain carbon steel and its effect on mechanical properties of steel, 16th annual conference of the iran casting society, Iran Science and Technology University (2005)

Karbalaii sabbagh, serajan, M.Tamizifar , Heat annealing study of Biomedical Ti-6Al-4V alloy surface after operation TIG , National Conferen ce on Heat Treatment , Islamic Azad University ,Shahre majlesi branch (2005)

Aghbabazadeh, Mazinani, M.Tamizifar , Mirhabibi, Effect of synthesis parameters on the formation of zinc oxide nanoparticles, First International Con ference of Color Science and Technology, Industrial Institute of Iran Color Research (2005)

Talatary, M.Tamizifar , Rastegary, Corrosion Behavior Ti6Al7Nb and Ti6Al4V alloys in physiologic body solutions in different situations, 8th annual congress of Iranian Metallurgical Engineers Society, Isfahan University of technology (2004)

Akbarzadeh, Mirdamady, M.Tamizifar , abdolhosseini, Role of zirconium addition to plain carbon steel and its effect on mechanical properties of steel, 16th annual conference casting Iran, Iran Science and technology university (2004)

Serajan, M. Tamizifar , Karbalaii sabbagh, Effect of TIG operation on Anodizing behavior of Biomedical Ti-6Al-4V, Fifth National Conference on Materials and Metallurgy, Islamic Azad University , Yazd branch (2004)

M. Tamizifar , Salehpour, poorkhalili, Effect of heat treatment and cutting thickness on mechanical properties of joint surface of hydroxyapatite coating on the surface of Biomedical Ti-6Al-4V alloy, 5th conference of ceramic, Iran Science and technology university (2004 )

Akbarzadeh, M.Tamizifar , Mirdamady, Mechanical properties and microstructure of micro-alloy cast steel containing zirconium, 4th Congress of Metallurgy and Materials Engineering, Islamic Azad University, Science and Research branch (2003)

Hejazy, Mirhabibi, Divandary, M.Tamizifar , Study the effect of nickel coating on carbon fiber tensile strength, Seventh Congress of Metallurgical Engineers, Sharif University of technology (2002)

Moghaddam , M.Tamizifar, Khorsand, habibi , Mechanical properties of powder metallurgy steel Ultrapac LA , Scientific Symposium Materials and Metallurgical Engineering, Sahand University in Tabriz (2002)

Mehryab, Adeli, ghamary, M.Tamizifar , the effect of raw materials h arnes s on binding strength of brass layer on steel using Cladding process, 10th Annual International Conference of Mechanical Engineering, Khaje-nasir University of technology (2002)

Salehpour , M.Tamizifar, Pirayeshnia, Effect of temperature on the velocity sedimentation method of CVD TiN on WC particles, The first specialized seminar on mineral pigments and ceramic coatings , Iran Science and technology university (2001)

M.Tamizifar, Zahraii, Heydarykia, pishgamzadeh, Effect of Hot Stage Heat treatment on microstructure and micro-hardness of sintered W-Ni-Fe, Sixth Annual Congress of Metallurgical Engineers, Iran Science and Technology University (2001)

Salehpour, M.Tamizifar , Mohammdzadeh, Investigating strength and common surface area of nickel based dental alloys (PFM) with porcelain ceramic type 2 , Sixth Annual Congress of Metallurgical Engineers, Iran Science and technology university (2001)

M.Tamizifar , Tehranipour, Salehpour , Production of MMC composite reinforced with AZ91 alumina particles via Vortex method , Second Scientific Conference on Materials and Metallurgical Engineering, Iran Science and technology university (2001)

Mehryab , M .Tamizifar , ghamary , Adeli , Connection strength of brass on steel using Cladding process, The first conference of metal forming, Sharif University of technology (2001)

Mirakhoury, M.Tamizifar , Lamsechy, Molar ratio of participating components in reactions of TiN ceramic coating on cutting tools using CVD method , 4th conference of Iranian ceramic, Mashhad University (2001)

Rajaii, M.Tamizifar , Khorramimehr, Stress analysis on the bone around fine different dental implants, 23rd Annual int.conf of the IEEE Eng. In medicine & Biologies Science (2001)

M. Tamizifar, Rajaii, Khorramimehr, Stress analysis of bone screws and dental implants under vertical and Lopsided load via FEM method, 10th conference of medical engineering, Tarbiat-Modarres University (2001)

Omidvar, M.Tamizifar , Salehy, Salehpour, Khoshkalam, Effect of thermo mechanical operation (temperature, speed, percentage of strain) on the morphology of alpha phase in Ti-6Al-4V alloy , The first conference of science and application of aerospace industries, Malek ashtar university of technology (2000)

M. Tamizifar, Rafii, Butoraby, salehpour, Investigating the thickness, temperature and surface tension parameters in the fluidity of AZ91 alloy, 12th annually conference of Iranian casting society, Tehran University (2000)

M. Tamizifar, Salehpour , Evaluation on microstructure and hardness of titanium dental implants , 9th conference of medical engineering, Iran Science and technology university (1999)

M. Tamizifar, shahraki, yazdanbakhsh, salehpour, Investigation on the reasons for completely deformation of leg prosthesis made of Ti-6Al-4V alloy , 9th conference of medical engineering, Iran Science and technology university (1999)

Nadery, Momeni, M. Tamizifar , Dissociation and rounding analysis Δ -ferrite within austenitic CF-3M stainless steel through precise casting process, The second symposium of Iranian metallurgy engineers, Sharif university of technology (1998)

Kalantary, M.Tamizifar , Precision titanium casting under centrifugal force, The first symposium of Iranian metallurgy engineers, Iran Science and technology university (1997)

Khodabakhshy , M. Tamizifar, Spherical amalgam alloy powder production method and investigating the effect of atomizing gas processing variables on the morphology and particle size powder , 8th conference of medical engineering, Amirkabir University of technology (1996)

Khorsandy, M.Tamizifar , Effect of heat treatment and alloying element molybdenum on hardness and impact resistance properties of the alloy Fe-1% C-13% Cr , Steel symposium 75, Isfahan university of technology (1996)

Ebrahimifar, M.Tamizifar , Effect of loading temperature and post heat treatment on the planning structure and properties of manganese austenitic steel , Steel symposium 75, Isfahan university of technology (1996)

Khodabakhshy , M. Tamizifar, Powder size range effect and heat treatment properties on high percentage copper included amalgam , 8th conference of medical engineering, Amirkabir University of technology (1996)

Ebrahimifar, M.Tamizifar , study and production of tungsten carbide based hard metals through Powder Metallurgy, The second conference of ceramic, Iran Science and Technology University (1994)

           

  مقالات ارائه شده در مجامع علمی – فارسی

علیرضا میرحبیبی, مهدی شیرانی, مرتضی تمیزی فر, زکریا بیرامی, "بهبود مقاومت به اکسیداسیون بدنه های گرافیتی با استفاده از پوشش کاربید سیلیسیم ", هشتمین کنگره سرامیک ایران, 1390
طاهره عارف عشقی, اسماعیل صلاحی, مرتضی تمیزی فر, علی نعمتی, مهران غفاری, "تأثیر افزودن بالکلی و اندازه ذرات کاربید سیلیسیم بر ساخت و سنتز دیرگدازهای کاربید سیلیسیم پیوند رسی", هشتمین کنگره سرامیک ایران, 1390
سعید سامانی, سید محمد حسینعلی پور, حمیدرضا رضائی, مرتضی تمیزی فر, "بهبود مشخصات ساختاری و سطح پوششهای هیدروکسی آپاتیت سنتز شده به روش سل - ژل با روپینگ همزمان عناصر نقره و روی", هشتمین کنگره سرامیک ایران, 1390
محسن صالحی, مقداد کربلایی جعفر, علیرضا میرحبیبی, مرتضی تمیزی فر, "تولید میکرو الیاف کربن بر پایه PAN  با استفاده از روش الکتروریسی", پنجمین همایش مشترک کنگره سالانه انجمن مهندسین متالورژی ایران و سمینار سالانه انجمن علمی ریخته گری ایران, 1390
محسن صالحی, علیرضا میرحبیبی, مرتضی تمیزی فر, مهدی مشرف جوادی, "بررسی اثر ترکیب مواد اولیه و زمان حرارت دهی در سنتز نانو سیمهای کاربید بور با استفاده از روش کربوترمال", پنجمین همایش مشترک کنگره سالانه انجمن مهندسین متالورژی ایران و سمینار سالانه انجمن علمی ریخته گری ایران, 1390
شیرانی, علیرضا میرحبیبی, مرتضی تمیزی فر, زکریا بیرامی, "ایجاد پوشش کاربید سیلیسیم بر روی بدنه های گرافیتی به روش سمنتاسیون پودری", پنجمین همایش مشترک کنگره سالانه انجمن مهندسین متالورژی ایران و سمینار سالانه انجمن علمی ریخته گری ایران, 1390
علی محمدی، مجتبی چنارانی، هادی کمالی، محمدجواد الوانی، مرتضی تمیزی فر، " بررسی اثر روانساز و فعالساز بر خواص خشته تنگستنی"،  همایش مهندسی مواد، متالورژی و ریخته گری ایران، 1387

حامد تمیزی فر, جمالی, هادیان, مرتضی تمیزی فر, "تحلیل و بررسی ریزساختار آلیاژ هاردمتال در اثر افزودن ممانعت کننده رشد کاربید بور", یازدهمین کنگره متالورژی, اصفهان, 1386

رخساری آذر, فراشیانی, باغشاهی, تمیزی فر, "تأثیر آلاینده اربیم و دما بر ساختار، ریزساختار و خواص نوری نانو لایه ZnO به روش سل – ژل ", چهاردهمین کنفرانس اپتیک و فنوتیک ایران, 1386

رحمانی نسب, باغشاهی, امیری, تمیزی فر, " تأثیر نانو لایه­های فلزی انباشت شده به روش کندوپاشت مغناطیسی بر بازتابش فروسرخ شیشه فلوت ", هشتمین کنفرانس ماده چگال, 1386

رحمانی نسب, باغشاهی, امیری, تمیزی فر, "استفاده از شیشه فلوت با پوشش نانو لایه نقره در سلولهای خورشیدی", سیزدهمین گردهمایی فیزیک ماده چگال, 1386

نعمتی, تمیزی فر, صهبا, " شبیه سازی رایانه ای مرحله نخست فرایند پرس ایزواستاتیک سرد پودر ", ششمین کنگره سرامیک ایران, 1386

کربلائی صباغ, زهیر سراجان, مرتضی تمیزی فر , " مطالعه عملیات حرارتی آنیلینگ گرید بیومدیکال بعد از عملیات سطحی T. I. G ", همایش ملی عملیات حرارتی , 1384

مرتضی تمیزی فر, زهرا صالحپور, حمید حاجی ابوطالبی, "کاشت یون نیتروژن روی سطح آلیاژ Ti-6Al-4V و بررسی فازی و خواص سطحی ناشی از آن ", اولین همایش بین المللی و دومین همایش ملی علوم و فناوری رنگ, 1384

زهیر سراجان, مرتضی تمیزی فر, بهروز کربلائی, "بررسی تأثیر عملیات TiG بر آندایزینگ گرید بیومدیکال Ti-6Al-4V ", همایش جوشکاری و اتصالات, 1384

کاوه شیخی مقدم, مرتضی تمیزی فر, حمید خرسند, محمد حبیبی, "بررسی خواص مکانیکی فولاد متالورژی پودر Ultrapac LA ", سومین همایش علمی-دانشجویی مهندسی مواد و متالورژی, 1382

اسماعیل حجاری, علیرضا میرحبیبی, مهدی دیواندری, مرتضی تمیزی فر, "مطالعه و بررسی تأثیر پوشش نیکل بر استحکام کششی الیاف کربن", هفتمین کنگره سالیانه انجمن مهندسین متالورژی ایران, دانشگاه صنعتی شریف , 1382

     

  جوایز و افتخارات

  عنوان

  سازمان اعطاء کننده

  سال

  اپوکسی نانو رس اصلاح شده با سیلان

  اداره کل ثبت شرکتها و مالکیت صنعتی

  86

  کاربید بور ( B4C ) سخت کننده جدید الیاژهای هاردمتال

  اداره کل ثبت شرکتها و مالکیت صنعتی

  86

     


دفعات مشاهده: 20836 بار   |   دفعات چاپ: 3243 بار   |   دفعات ارسال به دیگران: 180 بار   |   0 نظر