[صفحه اصلی ]   [ English ]  
بخش‌های اصلی
صفحه اصلی::
درباره دانشکده::
معرفی افراد::
امور آموزشی::
امور پژوهشی::
فضاهای تحقیقاتی::
اخبار و رویدادها::
آیین نامه ها و فرم ها::
تسهیلات پایگاه::
::
اطلاعات تماس

AWT IMAGE

آدرس: تهران، میدان رسالت، خیابان هنگام، دانشگاه علم و صنعت ایران، دانشکده مهندسی مکانیک

کدپستی: 13114-16846

صندوق پستی: 163-16765

تلفن:9-77491228

فاکس:77240488

پست الکترونیکی:

meresearch@iust.ac.ir

..
سیستم جامع گلستان

AWT IMAGE

..
..
برنامه کلاس
..
جستجو در پایگاه

جستجوی پیشرفته
..
نظرسنجی
سایت دانشکده مکانیک را چگونه ارزیابی می کنید:
عالی
خوب
متوسط
   
..
قطب علمی

AWT IMAGE

قطب علمی مکانیک جامدات تجربی و دینامیک

..
کادمان

AWT IMAGE

کانون دانش آموختگان و اساتید دانشکده مهندسی مکانیک دانشگاه علم و صنعت ایران

..
:: مقالات مجله ::
 | تاریخ ارسال: ۱۳۹۷/۱۲/۲۷ | 
International Journal Papers
[1] Bakhtar, F., Webb, R.A., Shojaeefard, M.H. and Savage, R.A,”An investigation of nucleating flows of steam in a cascade of turbine blading”, Trans.ASME, J. Fluids Engng, 1993, 115, pp 128-134.
[2] Shojaeefard, M.H. , Semanian, N., “Design and production of six freedom compiler”, International Journal of Engineering (IUST), 1993, Vol. 4, pp 1-12.
[3] Shojaeefard, M.H. , Bagheri, H. and Rahai. H.R., “On the Drag and Shedding Frequency of Wire- Wrapped Cylinders” , Journal of Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 1997, pp 1563-1570.
[4] Shojaeefard, M.H ., Mastaly, “Study pressure drag force of a lump on the surface of ultrasonic rockets ”, International Journal of engineering(IUST), 1998, Vol.10, pp 17-31.
[5] Shojaeefard, M.H ., Rahai, H.R., “Flow Past Wire-wrapped Cylinder”, International Journal of engineering (IUST), 1999, Vol. 10, pp 63-75.
[6] Shojaeefard, M.H ., Khalatbary, A.A., “Calculation of impact force of lumps on the surface of ultrasonic rockets” , Daneshvar(Shahed University), 2000, Vol. 25, pp 109-115.
[7] Shojaeefard, M.H ., Yassi, Y., Improvement of the Agnew Micro Hydro Turbine” , International Journal of Engineering (IUST), 2001, Vol. 115, pp 128-134.
[8] Shojaeefard, M.H ., Noorpoor, A.R. and Moghadam F., “Experimental and numerical study of Aerodynamics in X7 vehicles” , Journal of Automotive Science (IUST), 2001, Vol. 2, pp 37-46.
[9] Shojaeefard, M.H. , Sina, A., “Experimental and numerical study of Aerodynamics in Pykan vehicle” , Journal of Automotive Science (IUST), 2001, Vol. 5, pp 1-13.
[10] Shojaeefard, M.H ., Kamali, R., “Numerical study of fluid flow around exhaust valve with Finite Element method” , Journal of Automotive Science (IUST), 2001, Vol. 6, pp 1-12.
[11] Rahai, H.R., Vu, H.T. and Shojaeefard, M.H., Mixing enhancement using a coil insert” , Applied Thermal Engineering, 2001, Vol.21 , pp 303-309.
[12] Shojaeefard, M.H ., Noorpoor, A.R., “Study of Energy Accumulation system, Power and break transfer in Hybrid vehicles”, Journal of Automotive Science (IUST), 2001, Vol. 1, pp 11-17.
[13] Shojaeefard, M.H., Noorpoor, A.R., Numerical simulation of two-phase flow (air-cement) in miscellaneous branches (Tee-Way) ”, International Journal of Engineering Sciences (IUST), 2001, Vol.14, pp 135-148.
[14] Shojaeefard, M.H ., Nasiri, A. and Salari, M., “Flow 3-D Simulation in Catalyst Converter” , Journal of Automotive Science (IUST), 2002, Vol. 9, pp 61-68.
[15] Shojaeefard, M.H ., Noorpoor, A.R. and Bozchaloee, D.A., “Heat Analysis of Exhaust Valves for Peykan 1600”, Journal of Automotive Science (IUST), 2002, Vol. 10, pp 1-6.
[16] Shojaeefard, M.H ., Ehghaghi, M.B.,"Experimental and Numerical Study of a Centrifugal Pump - in the Performance of Viscous Flow”, International Journal of Engineering Sciences (IUST), 2002, VOL.13, pp 35-52.
[17] Shojaeefard, M.H. , Noorpoor, A.R., “Numerical Solution of Sinusoidal Pipe Flow to Simulation ICE Exhaust Valve Flow Behavior ”, International Journal of Engineering Sciences (IUST), 2003, Vol.14, pp 57-67.
[18] Shojaeefard, M.H. , Nasiri, A. and Momeni, A., “Investigation of Swirl effect on the combustion in OM355 engine”, Journal of Automotive Science (IUST), 2003, Vol. 12, pp 38-47.
[19] Shojaeefard, M.H ., Nasiritoosi, A. and Fatahi, A., “Numerical Modeling Injection Process for Internal Combustion Engine”, Journal of Automotive Science (IUST), 2003, Vol. 11, pp 12-22.
[20] Hosseini, P., Eslami, M.R. and Shojaeefard, M.H., Generalized thermoelastic analysis of layer interface excited by pulsed laser heating” , Engineering Analysis with Boundary Elements, 2003.
[21] Shojaeefard, M.H ., Noorpoor, A.R. and Bonchaloe, D.A., ''Transient Thermal Analysis of the Exhaust Valve Using Finite Element Method'', International Journal of Engineering Science (IUST), 2004, Vol.15, pp 34-46.
[22] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P., "Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS .
[23] SHOJAEEFARD M., "Numerical Investigation of flow Control by suction and Inhection on a subsonic", American Journal of Applied Scinces , 2005.
[24] SHOJAEEFARD M., "Transient Thermal Analysis of Engine Exhaust Valve", Journal of Numerical Heat transfer , 2005.
[25] SHOJAEEFARD M., "Numerical Simulation of 2-D Turbidity Currents and Wall Jet", American Journal of Applied Sciences , 2006.
[26] SHOJAEEFARD M., "Studies on the Influence of Various Blade Outlet Angles in a Centrifugal Pump", American Journal of Applied Sciences , 2006.
[27] SHOJAEEFARD M., "Thernal contact analysis using system Identification", heat transfer Engindering , 2006.
[28] SHOJAEEFARD M., "thernal contact analysisloing system identi fram nonlonear models", american journal of applied scinces , 2006.
[29] Shojaeefard M H, Hosseinimanesh Bahrami 3D Modeling of the Effect of the Louvered Fins in Compact Heatexchangers by Computational Fluid Dynamic IUST International Journal of Engineering Science ( submitted), 2007.
[30] M H Shojaeefard, K Goudarzi, A R Noorpoor and M Fazelpour "A Study of Thermal Contact using Nonlinear System Identification Models” - Department of Mechanical Engineering Department of Automotive Engineering Iran University of Science and Technology", 2007.
[31] SHOJAEEFARD M., "expermental and numerical investigation of centrifugal pump performance when handling viscous fluids with different outlet blade angles", journal of faculty of eng vol 34 no 2 , 2007.
[32] Shojaeefard M H, Goudarzi K and Ghasvari Jahromi H, “Numerical Simulation of 2_D Turbidity Currents and Wall Jet,” American Journal of Applied Sciences x (x) xx-xx 2007 ISSN 1546-9239", 2007.
[33] Shojaeefard M H Hosseinimanesh, “CFD study and Experimental Comparison of the Solid- Liquid Flow Separation in a Dual lnvolutes Axial Flow Cyclonic Separator ( Isep)” Journal of Multiphase Flow2007", 2007.
[34] M H Shojaefard and K Goudarzi, "The Numerical Estimation of Thermal Contact Resistance in Contacting Surfaces”, Department of Automotive Engineering Department of Mechanical Engineering Iran University of Science and Technology Tehran Iran", 2007.
[35] Shojaeefard M.H., Goudarzi K., and A.R. Noorpour,"Experimental Study of Heat Transfer between Exhaust Valve and its Seat of ICE", American Journal of Applied Sciences x (x): xx-xx, 2007,ISSN 1546-9239 (in press).
[36] Shojaeefard M H, Noorpoor A R, Yarjiabadi H and Havivian M, “Particle Size Dffects on Hydro- Cyclone Performance”, IUST International Journal of Engineering Science Vol 17 No 3-4 2006 Page 9-19", 2008.
[37] SHOJAEEFARD M., "numerical simulation of flow over an air foil with a cross flow fan as a lift as a lift generating member in a new air craft model", AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2008.
[38] SHOJAEEFARD M., "shape optimization of the airfoil comprising a cross flow fan", AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2008.
[39] Shojaeefard M H, Goudarzi K and M Sh Mazidi “Inverse Heat Transfer Problem of Thermal Contact Conductance Estimation in Periodically Contacting Surfaces,” Journal of Thermal Science Volume (18) No 2 2009 pp 150-159 (in press) , 2008.
[40] Shojaeefard M H and Goudarzi K, “The Numerical Estimation of Thermal Contact Resistance in contacting surfaces", American Journal of Applied Sciences 5(11) 1566-1571, 2008
[41] M.H., Shojaeefard, K., Goudarzi, and A.R. Noorpoor, "Experimental Estimation of Transient Contact Conductance between Exhaust Valve and Seat", American Journal of Applied Sciences, 2008.
[42] Shojaeefard M. H., Goudarzi K., Noorpoor A.R. and Fazelpour M., "Effect of Contact Pressure and Frequency on Contact Heat Transfer between Exhaust Valve and its Seat ", International Journal of Engineering, Iran, Vol. 21, No. 4, 2008.
[43] Shojaeefard M. H., Goudarzi K., Noorpoor A.R., "Experimental Estimation of Transient Contact Conductance between Exhaust Valve and its Seat", International Journal of Applied Engineering Research, Research India Publications, Delhi, India.
[44] K. Goudarzi, M. H. Shojaeefard, “Experimental Study of the Heat Transfer across Periodically Contacting Surfaces”, Journal of Mechanics, Vol. 25, No.3, 2009.
[45] SHOJAEEFARD M., "namerical investigation of flow in the liner of a model reverse - fiow gas turbin combustor", department of mechanical engineering , 2009.
[46] SHOJAEEFARD M., "numerical study of airflow around vehicle a-pillar region and windnoise generation prediction", mechanical engineering department , 2009.
[47] SHOJAEEFARD M., "Experimental study of stall in an airfoil with forced airflow provided by an integrated cross- flow fan", J of Aerospace Engineering , 2010.
[48] SHOJAEEFARD M., "Application of Inverse Method to The problem of thermal contact", International Journal of Heat and Technology , 2011.
[49] SHOJAEEFARD M., "comparison of steel aluminum and composite bonnet in terms of pedestrian head impact", SAFETY SCIENCE, PP. 1_10, 2011.
[50] SHOJAEEFARD M., "Differential Quadrature Solution of A transient Two- Dimensional Heat Conduction Problem", International Journal of Energy and Technology , 2011.
[51] SHOJAEEFARD M., "Mathematical Modeling of Potential Flow Over a Rotating Cylinder", IJE , 2011.
[52] SHOJAEEFARD M., "Numerical and analytical solution of compressible flow over double wedge and biconvex airfoils", Engineering computations International Journal, Vol. 28, No. 4, PP. 441_447, 2011.
[53] SHOJAEEFARD M., "Optimization of sound transmission through laminated composite cylindrical shells using GA", Journal Mechanics of Composite Materials , 2011.
[54] SHOJAEEFARD M., "The Two- dimensional Modeling of a Salt- Gradient Solar Pond witn Wall", Journal of Thermal Science , 2011.
[55] SHOJAEEFARD M., TALEBITOOTI R., "A study of Intake system noise transmission with porous Insulator using Statistical Energy Analysis", بین المللی مهندسی خودرو , 2011.
[56] SHOJAEEFARD M and TALEBITOOTI R., "optimization of sound transmission theough laminated composite culindrical shells by using a genetic algorithhm", MECHANICS OF COMPOSITE MATERIALS, Vol. 47, No. 4, PP. 481_494, 2011.
[57] KHALKHALI A. and SHOJAEEFARD M., "A parametric study for improving the centrifugal pump impeller for use in viscous fluid pumping", HEAT AND MASS TRANSFER, Vol. 49, PP. 197_206, 2012.
[58] KHALKHALI A. and SHOJAEEFARD M., "Artificial neural networks based prediction of performance and exhaust emissions in direct injection engine using castor oil biodiesel-diesel blends", Journal of Renewable and Sustainable Energy , 2012.
[59] SHOJAEEFARD M., "Artificial Neural Network Based Multi-Objective Evolutionary Optimization of a Heavy-Duty Diesel Engine", international journal of automotive engineering , 2012.
[60] SHOJAEEFARD M., "Cooled EGR in a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption", ijae , 2012.
[61] SHOJAEEFARD M., "Experimental and numerical study of an airfoil in combination with a cross flow fan", Institution of Mechanical Engineers, PP. 1173_1187, 2012.
[62] SHOJAEEFARD M., "modeling and pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm", material and design , 2012.
[63] SHOJAEEFARD M., "Numerical investigation on efects of induced jet on boundary layer and turbulent models arond airfoils", HEAT AND MASS TRANSFER, Vol. 40, No. 11 , 2012.
[64] SHOJAEEFARD M., "Numerical study of the effect of some geometric characteristics of a cenrifugal pump impeller that pumps a viscous fluid", computer and fluids , 2012.
[65] SHOJAEEFARD M., "Computer Simulation of Performance and Transient Behavior of A Salt Gradient Solar Pond", Jokull, Vol. 63, PP. 58_76, 2013.
[66] SHOJAEEFARD M., "Investigation on natural frequency of an optimized", latin american journal of sloids and structures, Vol. 11, PP. 113_129, 2013.
[67] SHOJAEEFARD M., "Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass", Advances in Materials Science and Engineering , 2013.
[68] SHOJAEEFARD M., "The estimation of time-varying thermal contact conductance between two fixed contacting surfaces", Mechanika, Vol. 19, PP. 167_171, 2013.
[69] SHOJAEEFARD M., "the investigation of the valve spring stiffiness influence on the thermal contact conductance between the exhaust valve and its seat", heat transfer engineering an international journal, No. 6611 , 2013.
[70] SHOJAEEFARD M and TALEBITOOTI R., "Enhancing Rollover Threshold of an Elliptical Container Based on Binary-coded Genetic Algorithm", international journal of automotive engineering, Vol. 3, No. 1, PP. 318_327, 2013.
[71] SHOJAEEFARD M., Eteghani M., Tahani M. and AKBARI M., "Cooled EGR for a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption", international journal of automotive engineering, Vol. 3, No. 3, PP. 474_481, 2013.
[72] TALEBITOOTI R. and SHOJAEEFARD M., "Optimum Design of 1st Gear Ratio for 4WD Vehicles Based onVehicle Dynamic Behaviour", Advances in Mechanical Engineering , 2013.
[73] GOODARZI A., SOLTANI A., SHOJAEEFARD M., and KHAJEPOUR A., "An integrated vehicle dynamic control strategy for three-wheeled vehicles", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS, No. 558741 , 2014
[74] SHOJAEEFARD M., AKBARI M., ASADI P., "Multi objective optimization of friction stir welding parameters using FEM and neural network", Academia-Revista Latinoamericana de Administracion, Vol. 15, No. 11, PP. 2351_2356, 2014.
[75] SHOJAEEFARD M., AKBARI M., KHALKHALI A., ASADI P.,  and Parivar A H, "Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method", MATERIALS and DESIGN, Vol. 64, PP. 660_666, 2014.
[76] SHOJAEEFARD M., KHALKHALI A., MIANDOABCHI E., "Effects of Process Parameters on Superplastic Forming of a License Plate Pocket Panel", international journal of advanced design and manufacturing technology, Vol. 7, No. 2, PP. 25_33, 2014.
[77] SHOJAEEFARD M., NAJIBI A., ANBARLOEI M., and Yeganeh M, "Experimental and numerical crashworthiness investigation of combined circular and square sections", Journal of Mechanical Science and Technology, Vol. 28, PP. 999_1006, 2014.
[78] SHOJAEEFARD M., NAJIBI A., RAHMATI AHMAD, and ABADI M., "Pedestrian safety investigation of the new inner structure of the hood to mitigate the impact injury of the head", THIN-WALLED STRUCTURES, Vol. 77, PP. 77_85, 2014.
[79] SHOJAEEFARD M., TALEBITOOTI R., AHMADI R., and GHEYBI M., "Sound transmission across orthotropic cylindrical shells using third-order shear deformation theory", Latin American Journal of Solids and Structures, Vol. 11, No. 11, PP. 2039_2072, 2014.
[80] SHOJAEEFARD M., TALEBITOOTI R., AHMADI R., and Ranjbar B, "A study on acoustic behavior of poroelastic media bonded between laminated composite panels", Latin American Journal of Solids and Structures, Vol. 11, No. 13, PP. 2379_2407, 2014.
[81] SHOJAEEFARD M., TALEBITOOTI R., Ranjbar B, and AHMADI R., "Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation", APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 35, PP. 1447_1466, 2014.
[82] SOLTANI A., GOODARZI A., SHOJAEEFARD M., and KHAJEPOUR A., "Vehicle dynamics control using an active third-axle system", VEHICLE SYSTEM DYNAMICS, Vol. 52, No. 11, PP. 1541_1562, 2014.
[83] MIRZAEI A., SHOJAEEFARD M., BABAIE A., YASSI Y., "Experimental study of redesigned draft tube of an Agnew microhydro turbine", ENERGY CONVERSION AND MANAGEMENT, Vol. 105, PP. 488_497, 2015.
[84] SHOJAEEFARD M., and KESHAVARZ LELEKAMI M., "Mathematical modeling of the complete thermodynamic cycle of a new Atkinson cycle gas engine", APPLIED THERMAL ENGINEERING, Vol. 91, PP. 866_874, 2015.
[85] SHOJAEEFARD M., KHALKHALI A., AKBARI M., and ASADI P., "Investigation of friction stir welding tool parameters using FEM and neural network", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 229, No. 3, PP. 209_217, 2015.
[86] HOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., "Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution", International Journal of Engineering, Vol. 28, No. 11, PP. 1663_1670, 2015.
[87] SHOJAEEFARD M., KHALKHALI A., SARMADI M., and HAMZEHI N., "Investigation on the optimal simplified model of BIW structure using FEM", Latin American Journal of Solids and Structures, Vol. 12, No. 10, PP. 1972_1990, 2015.
[88] SHOJAEEFARD M., MOLAEIMANESH G., AGHAMIRZAEE N.A., QEZEL BEYG LOO S., and ZEINOLABEDINI B., "Numerical evaluation of the defrosting/defogging performance of HVAC system in the main product of the national vehicle platform", international journal of automotive engineering, Vol. 5, No. 4, PP. 2006_2016, 2015.
[89] SHOJAEEFARD M., SALIMIAN RIZI M., KHALKHALI A., and Tahani M, "A New Method to Calculate Centrifugal Pump Performance Parameters for Industrial Oils", Journal of Applied Fluid Mechanics "JAFM", Vol. 8, No. 4, PP. 673_681, 2015.
[90] TALEBITOOTI R., AHMADI R., and SHOJAEEFARD M., "Three-dimensional wave propagation on orthotropic cylindrical shells with arbitrary thickness considering state space method", COMPOSITE STRUCTURES, Vol. 132, PP. 239_254, 2015.
[91] TALEBITOOTI R., SHOJAEEFARD M., and YARMOHAMMADI S., "Shape design optimization of cylindrical tank using b-spline curves", COMPUTERS and FLUIDS, Vol. 109, PP. 100_112, 2015.
[92] MAHMOODI A., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Theoretical development and numerical investigation on energy absorption behavior of tapered multi-cell tubes", THIN-WALLED STRUCTURES, Vol. 102, PP. 98_110, 2016.
[93] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Nonlinear low-velocity impact response of functionally graded plate with nonlinear three-parameter elastic foundation in thermal field", COMPOSITES PART B-ENGINEERING, Vol. 107, PP. 123_140, 2016.
[94] NAJIBI A., SHOJAEEFARD M., and YEGANEH M, "Developing and Multi-Objective Optimization of a Combined Energy Absorber Structure Using Polynomial Neural Networks and Evolutionary Algorithms", Latin American Journal of Solids and Structures, Vol. 13, PP. 2552_2572, 2016.
[95] SHOJAEEFARD M., EBRAHIMI NEJAD RAFSANJANI S., and MASJEDI M., "Vehicle Directional Stability Control Using Bifurcation Analysis of Yaw Rate Equilibria", international journal of automotive engineering, Vol. 6, No. 1, PP. 2065_2074, 2016.
[96] SHOJAEEFARD M., and HAKIMOLLAHI M., "A Comparison on Automotive NPD S PerformanceFactors between Academia Developed and Developing Countries (Case Study)", Transylvanian Review, No. 11, PP. 2867_2879, 2016.
[97] SHOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., "Intake Manifold Flow Assessment ona 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE", International Journal of Engineering, Vol. 29, No. 2, PP. 255_263, 2016.
[98] SHOJAEEFARD M., KHALKHALI A., and FIROUZGAN A., "Multi-objective optimization of a natural aspirated three-cylinder spark ignition engine using modified non-dominated sorting genetic algorithm and multicriteria decision making", Journal of Renewable and Sustainable Energy, Vol. 8, No. 025705, PP. 025705-1_025705-20, 2016.
[99] SHOJAEEFARD M., KHALKHALI A., and MIANDOABCHI E., "Multi-criteria decision making approach for selecting the best friction distribution in superplastic forming of a vehicle component", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 230, PP. 146_157, 2016.
[100] SHOJAEEFARD M., KHALKHALI A., and TAVAKKOLI LAHIJANI A., "Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model", Latin American Journal of Solids and Structures, Vol. 13, PP. 3039_3061, 2016.
[101] SHOJAEEFARD M., MOLAEIMANESH G., NAZEMIAN M., and MOGHADARI M., "A review on microstructure reconstruction of PEM fuel cells porous electrodes for pore scale simulation", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 41, No. 44, PP. 20276_20293, 2016.
[102] SHOJAEEFARD M., and ZARE J., "Modeling and combined application of the modified NSGA-II and TOPSIS to optimize a refrigerant-to-air multi-pass louvered fin-and-flat tube condenser", APPLIED THERMAL ENGINEERING, Vol. 103, PP. 212_225, 2016.
[103] SIAVASHI M., and SHOJAEEFARD M., "Numerical Simulation of Air Flow around the NP Car Using the Realizable k- Turbulence Model to Predict Aerodynamic Forces and Moments", international journal of automotive engineering, Vol. 5, No. 2, PP. 2148_2162, 2016.
[104] NAJIBI A., and SHOJAEEFARD M., "ElasticMechanical Stress Analysis in a ۲D-FGMThick Finite LengthHollow CylinderwithNewlyDeveloped MaterialModel", ACTA MECHANICA SOLIDA SINICA, Vol. 2, No. 29, PP. 178_191, 2016.
[105] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., "Hybrid multi-objective optimization of microstructural and mechanical properties of B 4 C/A356 composites fabricated by FSP using TOPSIS and modified numerical OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 27, No. 11, PP. 2317_2333, 2017.
[106] SHOJAEEFARD M, KHORAMPANAHI A, KHEIRKHAH VM. EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF OSCILLATION PARAMETERS EFFECTS ON STABILITY DERIVATIVES OF A NACA0012 AIRFOIL.
[107] Shojaeefard MH, Khorampanahi A, Mirzaei M. Numerical investigation of oscillation frequency and amplitude effects on the hydrodynamic coefficients of a body with NACA0012 hydrofoil section. Journal of Mechanical Science and Technology. 2017 May 1;31(5):2251-60.
[108] Shojaeefard MH, Azarikhah P, Qasemian A. Experimental Investigation of Thermal Balance and Valve Cover Heat Transfer in a Small Internal Combustion Engine. International Journal of Automotive Engineering. 2017 Jun 15;7(2):2423-33.
[109] Shojaeefard MH, Khorampanahi A, Koopaee MK. TIME-PERIODIC INCOMPRESSIBLE FLOW SIMULATION USING NON-LINEAR FREQUENCY DOMAIN APPROACH/Simulacija vremenski periodicnog nestlacljivog toka pristupom ne-linearnog podrucja frekvencije. Tehnicki Vjesnik-Technical Gazette. 2017 Oct 1;24(5):1307-15.
[110] Shojaeefard MH, Zare J, Tabatabaei A, Mohammadbeigi H. Evaluating different types of artificial neural network structures for performance prediction of compact heat exchanger. Neural Computing and Applications. 2017 Dec 1;28(12):3953-65.
[111] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., "Wear and mechanical properties of surface hybrid metal matrix composites on AlSi aluminum alloys fabricated by friction stir processing", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, PP. 1464420717, 2017.
[112] AKBARI M., SHOJAEEFARD M., ASADI P., and KHALKHALI A., "Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles", JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 26, No. 9, PP. 4297_4310, 2017.
[113] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Low-velocity impact response of functionally graded doubly curved panels with Winkler-Pasternak elastic foundation An analytical approach", COMPOSITE STRUCTURES, Vol. 162, PP. 351_364, 2017.
[114] NAJAFI F., SHOJAEEFARD M., and SAEIDI GOOGARCHIN H., "Nonlinear dynamic response of FGM beams with Winkler Pasternak foundation subject to noncentral low velocity impact in thermal field", COMPOSITE STRUCTURES, Vol. 167, PP. 132_143, 2017.
[115] SHOJAEEFARD M., AKBARI M., ASADI P., and KHALKHALI A., "The effect of reinforcement type on the microstructure mechanical properties and wear resistance of A356 matrix composites produced by FSP", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 91, PP. 1391_1407, 2017.
[116] SHOJAEEFARD M., EBRAHIMI NEJAD RAFSANJANI S., and KAMARKHANI S., "Optimization of Exhaust System Hangers for Reduction of Vehicle Cabin Vibrations", international journal of automotive engineering, Vol. 7, No. 1, PP. 2313_2324, 2017.
[117] SHOJAEEFARD M., and HAKIMOLLAHI M., "NPDs Performance Measurement Model of Automotive Industry", Transylvanian Review, Vol. 17, No. 18, PP. 4608_4617, 2017.
[118] SHOJAEEFARD M., KHALKHALI A., EBRAHIMI NEJAD RAFSANJANI S., and GHADIRINEJAD K., "Numerical investigation on automotive bumper structure improvements for pedestrian protection", INTERNATIONAL JOURNAL OF CRASHWORTHINESS, No. 22, PP. 1_19, 2017.
[119] SHOJAEEFARD M., KHALKHALI A., FAGHIHIAN H., and DAHMARDEH M., "Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution application to automotive suspension system", ENGINEERING OPTIMIZATION, No. 5, PP. 1_12, 2017.
[120] SHOJAEEFARD M., KHALKHALI A., and YARMOHAMMADI S., "An efficient sensitivity analysis method for modified geometry of Macpherson suspension based on Pearson correlation coefficient", VEHICLE SYSTEM DYNAMICS, Vol. 55, No. 6, PP. 827_852, 2017.
[121] SHOJAEEFARD M., MOLAEIMANESH G., YARMOHAMMADI S., and CHANGIZIAN S., "Multi-objective optimization of an automotive louvered fin-flat tube condenser for enhancing HVAC system cooling performance", APPLIED THERMAL ENGINEERING, Vol. 125, PP. 546_558, 2017.
[122] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., GHADIRI M., and MAHINZARE M., "Micro temperature-dependent FG porous plate Free vibration and thermal buckling analysis using modified couple stress theory with CPT and FSDT", APPLIED MATHEMATICAL MODELLING, Vol. 50, PP. 633_655, 2017.
[123] SHOJAEEFARD M., ZARE J., and NOURBAKHSH S., "An investigation of the effects of geometry design on refrigerant flow mal-distribution in parallel flow condenser using a hybrid method of finite element approach and CFD simulation", APPLIED THERMAL ENGINEERING, Vol. 112, PP. 431_449, 2017.
[124] SHOJAEEFARD M., ZARE J., and NOURBAKHSH S., "Developing a hybrid procedure of one dimensional finite element method and CFD simulation for modeling refrigerant flow mal-distribution in parallel flow condenser", INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol. 73, PP. 39_53, 2017.
[125] YARMOHAMMADI S., SHOJAEEFARD M., and KHALKHALI A., "A family base optimization of a developed nonlinear vehicle suspension model using gray family design algorithm", NONLINEAR DYNAMICS, Vol. 90, PP. 649_669, 2017.
[126] MOGHADARI M., SHOJAEEFARD M., and MOLAEIMANESH G., "Effects of electrode compression on the water droplet removal from proton exchange membrane fuel cells", KOREAN JOURNAL OF CHEMICAL ENGINEERING , 2018.
[127] SALAMI Y.Y., SHOJAEEFARD M., and MOLAEIMANESH G., "Thermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles", international journal of automotive engineering, Vol. 8, No. 2, PP. 2700_2708, 2018.
[128] SHOJAEEFARD M., MAHINZARE M., SAFARPOUR H., SAEIDI GOOGARCHIN H., and GHADIRI M., "Free vibration of an ultra-fast-rotating-induced cylindrical nano-shell resting on a Winkler foundation under thermo-electro-magneto-elastic condition", APPLIED MATHEMATICAL MODELLING, Vol. 61, PP. 255_279, 2018.
[129] SHOJAEEFARD M., MALEKI M., MASIH-TEHRANI M., SANGSEFIDI A., and NIROOBAKHSH M., "Designing a buffer-equipped hydraulic engine mount for mid-priced vehicles", international journal of automotive engineering, Vol. 8, No. 2, PP. 2692_2699, 2018.
[130] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and ADIBI M., "Vibration and buckling analysis of a rotary functionally graded piezomagnetic nanoshell embedded in viscoelastic media", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, PP. 2344_2361, 2018.
[131] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and EFTEKHARI S., "Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates A comparative study on modified couple stress theory and nonlocal elasticity theory", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, PP. 2492_2507, 2018.
[132] SHOJAEEFARD M., SAEIDI GOOGARCHIN H., MAHINZARE M., and GHADIRI M., "Free vibration and critical angular velocity of a rotating variable thickness two-directional FG circular microplate", MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 24, PP. 1525_1543, 2018.
[133] TAVAKKOLI LAHIJANI A., SHOJAEEFARD M., and KHALKHALI A., "Optimal design of the floor panel for an automotive platform under uncertainty of the vehicle lengthof the vehicle lengthof", Geomechanics and Engineering, Vol. 14, No. 1, PP. 91_98, 2018.
[134] Asadinia N, Khalkhali A, Saranjam MJ. Sensitivity analysis and optimization for occupant safety in automotive frontal crash test. Latin American Journal of Solids and Structures. 2018;15(7).
[135] Shojaeefard MH, Keshavarz M. Flame propagation model for a rotary Atkinson cycle SI engine. International Journal of Automotive Technology. 2018 Feb 1;19(1):9-25.
[136] Shojaeefard MH, Khorampanahi A, Mirzaei M. RANS study of Strouhal number effects on the stability derivatives of an autonomous underwater vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 Mar 1;40(3):124.
[137] Hashempoor D, ShojaeeFard M. The Analysis of Large Deformation of Beam by Functionally Graded Material (FGM) Under Uniform Transverse Loading. Mapta Journal of Mechanical and Industrial Engineering (MJMIE). 2018 Apr 20;2(01):16-22.
[138] Gheibi MR, Shojaeefard MH, Saeidi Googarchin H. Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints. The Journal of Adhesion. 2018 Apr 21:1-28.
[139] Yarmohammadisatri S, Shojaeefard MH, Khalkhali A, Goodarzian S. Sensitivity analysis and optimisation of suspension bushing using Taguchi method and grey relational analysis. Vehicle System Dynamics. 2018 Jun 27:1-9.
[140] Shojaeefard MH, Saeidi Googarchin H, Mahinzare M, Eftekhari SA. Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates: A comparative study on modified couple stress theory and nonlocal elasticity theory. Journal of Intelligent Material Systems and Structures. 2018 Jul;29(11):2492-507.
[141] Shojaeefard MH, Zare J. An investigation of the potential of improving an R1234yf parallel flow condenser performance using modeling and hybrid procedure of the modified NSGA-II and TOPSIS. Heat Transfer Engineering. 2018 Sep 14;39(15):1405-22.
[142] Sajedin A, Shojaeefard M, Khalkhali A. Radial Gradient Pressure Effects on Flow Behavior in a Dual Volute Turbocharger Turbine. Applied Sciences. 2018 Oct;8(10):1961.
[143] SAEIDI GOOGARCHIN H., PASANDIDEH POOR M., MAHMOODI A., and SHOJAEEFARD M., "Energy absorption analysis for tapered multi-cell tubes improved by foams Theoretical development and numerical simulation", COMPOSITE STRUCTURES, Vol. 207, PP. 213_222, 2019.
[144] Shojaeefard MH, Khakshournia S, Khalkhali A. A new method to find the material constants for Goldberg’s strain-rate dependent constitutive model: an application in automotive polymeric instrument panel. Materials Research Express. 2019 Mar 1;6(6):065302.
[145] Gheibi MR, Shojaeefard MH, Googarchin HS. Experimental and numerical analysis on the cohesive behavior of an automotive adhesive improved by MWCNT subjected to mode I and II loadings. International Journal of Mechanical Sciences. 2019 Feb 8.
[146] Shojaeefard MH, Molaeimanesh GR, Ranjbaran YS. Improving the performance of a passive battery thermal management system based on PCM using lateral fins. Heat and Mass Transfer. 2019:1-5.
[147] Molaeimanesh GR, Shojaeefard MH, Moqaddari MR. Effects of electrode compression on the water droplet removal from proton exchange membrane fuel cells. Korean Journal of Chemical Engineering. 2019 Jan 1;36(1):136-45.
[148] V. M. Khaneshan and M. H. Shojaeefard. “Effect of surface temperature on the impaction and deposition of micron sized engine oil particles on a heated flat plate,” Journal of the Brazilian Society of Mechanical Sciences and Engineering (BMSE). Apr 3, 2019
[149] شجاعی فرد محمدحسن، نصیری طوسی علی، سالاری مجید، "شبیه سازی سه بعدی جریان در واکنشگر شیمیایی کمیرا" international journal of automotive engineering، شماره ۱۲، ۱۳۸۲.
[150] شجاعی فرد محمدحسن، نصیری طوسی علی، فتاحی احمد، "بررسی اثر پارامترهای تزریق سوخت روی آلاینده های خروجی از یک موتور دیزلی" international journal of automotive engineering، شماره ۱۲، ۱۳۸۲.
[151] شجاعی فرد محمدحسن، نصیری طوسی علی، مومنی موحد علی، "بررسی اثر swirl بر روی احتراق و آلاینده ها در موتور OM۳۵۵" international journal of automotive engineering، شماره ۱۲، صفحه۱، ۱۳۸۲.
[152] شجاعی فرد محمدحسن، "تحلیل گذاری حرارتی سوپاپ دود با استفاده از المان محدود" مجله بین المللی علوم مهندسی - دانشگاه علم و صنعت ایران، ۱۳۸۳.
[153] شجاعی فرد محمدحسن، "شناخت اولویتهاواستانداردهای حمل ونقل هوشمندجاده ای" استاندارد وپژوهش، ۱۳۸۵.
[154] شجاعی فرد محمدحسن، "بهینه سازی تجربی و عددی ایرودینامیکی دماغه خودروی سمند" مجله مهندسی مکانیک، ۱۳۸۸.
[155] شجاعی فرد محمدحسن، "بررسی اثرات پدیده بافتینگ بر سطح صدای داخل کابین خودرو و روشهای کنترل آن" انجمن مهندسان مکانیک ایران، ۱۳۸۹.
[156] شجاعی فرد محمدحسن، "بررسی افت انتقال صوت سیستم مکش هوای موتور با استفاده از مواد متخلخل عایق صوت به روش تحلیل انرژی آماری" تحقیقات موتور، شماره ۱۸، ۱۳۸۹.
[157] شجاعی فرد محمدحسن، طالبی توتی روح الله، "بررسی منابع نویز ایرودینامیکی درون کابین خودروو روشهای کنترل ان" ISME، ۱۳۸۹.
[158] شجاعی فرد محمدحسن، "Application of inverse method to the problem of thermal contactance estimtion using simulated measured temperatures " heat and technology، سال ۲۹، شماره ۱، صفحه۱۳۵_۱۴۱، ۱۳۹۰.
[159] شجاعی فرد محمدحسن، طالبی توتی روح الله، "مدل آلمان مرزی و تحلیلی برای انتقال صوت از پوسته مافلر خودرو" مهندسی مکانیک مدرس، سال ۱۱، شماره ۲، صفحه۱_۱۱، ۱۳۹۰.
[160] شجاعی فرد محمدحسن، "بررسی عددی و تجربی اثر هندسه چرخ متحرک بر عملکرد پمپ گریز از مرکز هنگام پمپاژ روغن" ماهنامه علمی و پژوهشی مهندسی مکانیک مدرس، ۱۳۹۱.
[161] شجاعی فرد محمدحسن، "بهینه سازی چندهدفی عملکرد گرمایی لوله حرارتی هنگام استفاده از نانوسیال اکسید الومینیوم" ماهنامه علمی و پژوهشی مهندسی مکانیک مدرس، ۱۳۹۱.
[162] شجاعی فرد محمدحسن، خلخالی ابوالفضل، "بهینه سازی چند هدفی پروانه پمپ روغن گریز از مرکز" تربیت مدرس، ۱۳۹۱.
[163] شجاعی فرد محمدحسن، طالبی توتی روح الله، یارمحمدی سطری صادق، "طراحی سطح مقطع تانکر های حمل سیال جهت کاهش تلاطم تانکر با استفاده از تابع بی اسپلاین بر مبنای روش اعمال ضریب جریمه" مکانیک سازه ها و شاره ها، سال ۲، شماره ۲، صفحه۴۵_۵۴، ۱۳۹۱.
[164] گودرزی کوروش، شجاعی فرد محمدحسن، طالبی توتی روح الله، شهباز شهاب الدین، "بررسی تاثیر صفحه های جدا کننده بین کانتینر و کابین در آیرودینامیک ون-کامیون و مصرف سوخت آن" نشریه پژوهشی مهندسی مکانیک ایران، سال ۱۴، شماره ۱، صفحه۴۵_۵۹، ۱۳۹۱.
[165] شجاعی فرد محمدحسن، "بررسی و مقایسه اثر نانوسیلات مختلف بر عملکر گرمایی لوله حرارتی" مجله علمی پژوهشی مکانیک سازه ها و شاره ها، ۱۳۹۲.
[166] شجاعی فرد محمدحسن، طالبی توتی روح الله، یارمحمدی سطری صادق، "بهینه سازی آستانه واژگونش تانکر خودروهای حامل سوخت بر مبنای طراحی الکگوریتم بهینه سازی سطح مقطع تانکر" مهندسی مکانیک مدرس، سال ۱، شماره ۱۳، صفحه۱_۱۲، ۱۳۹۲.
[167] شجاعی فرد محمدحسن، خلخالی ابوالفضل، زارع جواد، طحانی مجتبی، "بهینه سازی چند هدفی عملکرد گرمایی لوله حرارتی هنگام استفاده از نانوسیال اکسید آلومینیوم" مهندسی مکانیک مدرس، سال ۱۴، شماره ۱، صفحه۱۵۸_۱۶۷، ۱۳۹۳.
[168] شجاعی فرد محمدحسن، طالبی توتی روح الله، احمدی رضا، غیبی محمد رضا، "تحلیل آکوستیکی پوسته استوانه ای جدار ضخیم با تغییر شکل های برشی مراتب بالا به روش اصل همیلتون" مهندسی مکانیک مدرس، سال ۱۴، شماره ۴، صفحه۱۴۷_۱۵۷، ۱۳۹۳.
[169] شجاعی فرد محمدحسن، طالبی توتی روح الله، ترابی منصور، احمدی رضا، "بهینه سازی تراکنش توان صوتی پنل های چند جداره با استفاده از الگوریتم ژنتیک" مهندسی مکانیک مدرس، سال ۱۴، شماره ۱، صفحه۲۷_۳۴، ۱۳۹۳.
[170] شجاعی فرد محمدحسن، طالبی توتی روح الله، رنجبر بهزاد، احمدی رضا، "تحلیل انتقال توان صوتی از طریق پنل های دوجداره کامپوزیت لایه ای با لایه متخلخل میانی تحت شرایط مرزی مختلف" مهندسی مکانیک مدرس، سال ۱۴، شماره ۶، صفحه۱۱_۲۱، ۱۳۹۳.
[171] شجاعی فرد محمدحسن، طالبی توتی روح الله، یارمحمدی سطری صادق، "بهینه سازی مدل پاندول ترامل جهت شبیه سازی تلاطم سیال در مخزن خودرو های حامل سوخت" نشریه پژوهشی مهندسی مکانیک ایران، سال ۱۶، شماره ۱، صفحه۷_۲۲، ۱۳۹۳.
[172] شجاعی فرد محمدحسن، "شبیه سازی و بهبود استحکام و عمر خستگی اتصال چسبی تک لبه ای با بکارگیری مدل ناحیه چسبناک تضعیف شونده چرخشی" مهندسی مکانیک مدرس، سال ۹۹، شماره ۹، صفحه۱_۱۱، ۱۳۹۴.
[173] شجاعی فرد محمدحسن، خلخالی ابوالفضل، کلانتری روزبه، "طراحی پانل جانبی بدنه منفصل خودرو کلاس B و شبیه سازی اجزای محدود برخورد از جانب" مکانیک سازه ها و شاره ها، سال ۵، شماره ۳، صفحه۵۱_۶۴، ۱۳۹۴.
[174] شجاعی فرد محمدحسن، میرزائی عمار، عابدی نژاد محمدصادق، یاسی یوسف، "بررسی کارائی مدل های مختلف در شبیه سازی عددی عملکرد یک میکرو توربین آبی اگنیو" مهندسی مکانیک مدرس، سال ۱۵، شماره ۶، صفحه۲۲۱_۲۳۰، ۱۳۹۴.
[175] طالبی توتی روح الله، جریانی گلناز، شجاعی فرد محمدحسن، "محاسبه شتاب آستانه واژگونش خودروی تانکردار تحت تلاطم سیال با استفاده از روش نگاشت" مکانیک سازه ها و شاره ها، سال ۵، شماره ۴، صفحه۱۶۳_۱۷۶، ۱۳۹۴.
[176] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، حسین اوغلی سجاد، "تحلیل مفهومی استحکام شاتون به کمک روش جرم های متمرکز" مجله مهندسی مکانیک دانشگاه تبریز، سال ۴۶، شماره ۴، صفحه۱۵۱_۱۶۰، ۱۳۹۵.
[177] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، "معرفی روش های عددی بکار رفته جهت مدل سازی عددی اتصالات چسبی" مهندسی مکانیک، سال ۲۵، شماره ۱۱۰، صفحه۴۴_۵۲، ۱۳۹۵.
[178] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، نیک خواه محمدامین، "شبیه سازی و بهبود استحکام و عمر خستگی اتصال چسبی تک لبه ای با بکارگیری مدل ناحیه چسبناک تضعیف شونده چرخه ای" مهندسی مکانیک مدرس، سال ۱۶، شماره ۵، صفحه۲۸۱_۲۸۹، ۱۳۹۵.
[179] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، بناگر عیسی، طبائی امین، "معرفی و کاربرد مواد هوشمند مغناطیسی در خودرو" مهندسی مکانیک، سال ۱۱۵، شماره ۲۶، صفحه۳۰_۳۷، ۱۳۹۶.
[180] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، "اتصال ترکیبی چسب جوش، روشی کارآمد در کاهش وزن خودروها" مهندسی مکانیک، سال ۲۶، شماره ۱۱۳، صفحه۵۹_۶۶، ۱۳۹۶.
[181] شجاعی فرد محمدحسن، سعیدی گوگرچین حامد، غیبی محمدرضا، ارجمندی محمد، "بررسی تجربی و عددی استحکام اتصال چسبی با مدل ناحیه چسبناک پی. پی. آر. اصلاحشده" مجله مهندسی مکانیک دانشگاه تبریز، سال ۴۷، شماره ۱، صفحه۱۳۱_۱۳۹، ۱۳۹۶.
 
 
دفعات مشاهده: 1111 بار   |   دفعات چاپ: 100 بار   |   دفعات ارسال به دیگران: 0 بار   |   0 نظر

CAPTCHA
   
سایر مطالب این بخش سایر مطالب این بخش نسخه قابل چاپ نسخه قابل چاپ ارسال به دوستان ارسال به دوستان
School of Mechanical Engineering
Persian site map - English site map - Created in 0.15 seconds with 56 queries by YEKTAWEB 4122