- PERSONAL DETAILS:

  First name: Mohammad Reza

  Surname: Aboutalebi

  ACCADEMIC STATUS: Professor

  - CONTACT INFORMATION:

  Department of Metallurgy &Materials Engineering ; Iran University of Science & Technology (IUST) ; Narmak ; Tehran ; Iran

  Tel: (+9821)7745-9151 Fax: (+9821)7724-0480

  E-mail: mrezab@iust.ac.ir

  EDUCATION:

  1995 , Dept. of Mining and Metallurgical Engineering, McGill University, Canada

  PhD in Metallurgical Engineering

  1987, Dept. of Materials Engineering, Tarbiat Modarres University, Iran

  MS in Materials Engineering

  1981, Dept. of Materials and Metallurgical Engineering, Iran University of Science and Technology, Iran

  BS in Metallurgical Engineering

  Research INTEREST

• Modelling of Metallurgical Processes( Melt Treatment and Casting, Heat Treatment of Alloys, and Synthesis of Materials )
• Fluid Flow, Heat Transfer & Solidification in Materials Processing
• Advanced Materials Synthesis and Processing
• Electromagnetic Processing of Materials
• Mechanochemical Synthesis of Composite Materials
• Combustion Synthesis of Intermetalic compounds

  pRofessional experience:

  2006-present, Iran University of Science &Technology (IUST)

  Professor

  2000 – 2006, Iran University of Science &Technology (IUST)

  Associate Prof.

  1995-2000 , Iran University Science &Technology (IUST)

  Assistant Prof.

  Teaching.experience :

  Under graduate:

  Transport Phenomena in Materials Processing, Solidification Processing

  Graduate:

  Mathematical and Physical Modelling of Materials Processing, Metallurgical Thermodynamics and kinetics, Non-ferrous Alloys Processing

  Research activities :

  · Solidification Modelling in Continuous Casting of Metals

  · Aluminide Coating on Ni –base Superalloys

  · Mathematical Modeling of Magnetohydrodynamics in the Liquid Metals Processing.

  · Mechano-chemical Reactions in materials Processing

  · Electromagnetic processing of Materials

  REPRESENTATIVE PUBLICATIONS:

  Journal Papers :

  · "Mathematical Modeling of Coupled Turbulent Flow and Solidification in a Single Belt Caster with Electromagnetic Brake(with R.I.L.Guthrie and S.H. Seyedein), Applied Mathematical Modeling,Volume31, Issue 8, August 2007, pp. 1671-1689

  · Study of Fluxing Temperature in Molten Aluminum refining process,( with O. Majidi, and S.G. Shabestari), Journal of Materials Processing Technology, 182(2007), 450-455.

  · Alloying Kinetics of Mechanically Activated Mn-Al Powder Compacts in Aluminum Melt,(with R. Molaei, and M. Soltanieh), Canadian Metallurgical Quarterly(CMQ), Vol.45, No.4, 2006 pp.373-378.

  · Numerical Simulation of Coupled Fluid Flow and Solidification in a Single Roll Caster, (with S.H. Seyedein and A. Jafari), Canadian Metallurgical Quarterly (CMQ), Vol.45, No. 3, 2006, pp. 329-340.

  · The effect of milling conditions on the mechanical alloying and combustion synthesis of TiO₂ –Al-C powders (with J. Vahdati and S.H. Fatemi), Iranian Journal of Materials Science & Engineering, Vol. 3, No.1, pp. 25-31, 2006

  · On the Behavior Hematite and Graphite Blend During Ball Milling and Heating up Reduction of Milled Mixture, (with S.Raygan and J. Vahdati), Steel Research Int. 75(2004), No.3, pp. 161-166.

  · The Behavior of Selenium Impurities during the Addition of Se-Containing Manganese to Steel Melt(with R.I.L. Guthrie and M. Isac), Steel Research Int. 75(2004) No.6, pp. 366-372.

  · Effect of Mechanical Activation on the Packed-Bed High Temperature Behavior of Hematite and Grphite Mixture in Air,(with S. Raygan and J.Vahdati), Journal of Materials Synthesis and Processing, Vol. 10, No.3, 2002, p.113

• An Investigation on the Effect of Chromizing Parameters on Hot Corrosion Behavior of IN-738LC at 850 C, (with H. Arabi, and M. Zarghami), International Journal of Engineering Science, Vol. 13 ,No. 2, ‏ 2002
• Microstructure and Formation Mechanism of a Cr-Modified Platinum Aluminide Coating on IN-738LC, (with S. Rastegari and H. Arabi), International Journal of Engineering Science, Vol. 13 ,No. 2, ‏ 2002

  · “ Modeling of Coupled Heat Transfer and Plastic Flow During Cold-Rolling of Brass Strips”,(with M.T. Salehi and M.B. Limooi), International Journal of Engineering Science,I.U.S.T., 2001

  · “ Heat Transfer Modeling of the Melting of Solid Particles in an Agitated Molten Metal Bath”,( with J. Vahdati Khaki), Canadian Metallurgical Quarterly, 1996

  · “Thermal Modelling and Stress Analysis in Continuous Casting of Arbitrary Cross Section”, (with M. Hasan and R.I.L Guthrie) Journal of Steel Research , No. 6, June 1994

  · “ Coupled Turbulant Flow , Heat and Solute Transport in C.C. Processes” , (with M. Hasan and R.I.L. Guthrie) Metallurgical & Materials Transaction,26B,August 1995

  · “Numerical Study of Coupled Turbulant Flow and Solidification for Steel Slab Caster”, (with M. Hasan and R.I.L. Guthrie) Journal of Numerical Heat Transfer Part A, No. 28, Sept. 1995

  Conference Papers: