Dr. Hashemabadi, Seyed Hassan

 | Post date: 2014/01/28 | 

AWT IMAGE

           Academic Rank :Professor

           Major :Design , Simulation and  Process Control  

               Tel:+98(21)77240496

            Fax:+98(21)77240495

             E-mail : hashemabadi[at]iust.ac.ir

google scholar

Personal Information 

  Nationality : Iranian

  Position:Full Professor (Since 2010)

  Institution : Iran University of Science and Technology

  Address : Computational Fluid Dynamics (CFD) Research Laboratory, School of Chemical Engineering, Iran University of Science and Technology, Narmak, Tehran, 16846, Iran

  Tel Number: +(9821)7724-0376

  Fax Number : +(9821)7724-0495

  E-mail : hashemabadiiust.ac.ir

Educational Qualifications

  1. Undergraduate Course in Chemical Engineering (Petrochemical) Amirkabir University ofTechnology, (Tehran Polytechnic) 1988-1992
Thesis Title: "Experimental Preparation of Chemical Manganese Dioxide (CMD) and Pilot Plant Design", Average: 17.05/20
  1. Postgraduate Course and Research in Chemical Engineering
            Amirkabir University of Technology, (Tehran Polytechnic) 1992-1995
            Thesis Title: “Experimental & Numerical analysis of Laminar Heat Transfer of      Non-Newtonian Fluids in Pipe with Temperature Dependent Viscosity"
Under the Direct Supervision of Dr. M.R. Golkar Naranji and Dr. E. Jamshidi as Co supervisor, Average:18/20
Under the Direct Supervision of Dr. M.R. Golkar Naranji and Dr. S.Gh. Etemad as Co supervisor, Average:17.79/20

 

Roles & Responsibilities

  1. Chairman for 4th National Fluid Flow Measurement Conference and Exhibition, 2019
  2. The chairman of technical committee OIML/TC8 “Measurement of Quantities of Fluids”, 2016-present
  3.  The chairman of technical committee ISO/TC30 “Measurement of fluid flow in closed conduits”, 2015-present
  4. Head of Gas Smart Measurement Institute, 2015- present
  5. Member of Oil and Energy Committee in Ministry of Science, Research and Technology, 2014-2016
  6. Chairman for 3rd National Fluid Flow Measurement Conference and Exhibition, 2016
  7. Chairman for 2nd Iranian School of Hydrocarbon Measurement (IrSHM), 2015.
  8. Chairman for the 5th National Conference on CFD Applications in Chemical & Oil Industries, 2014.
  9. Head of Process Design, Simulation and Control Group, Chemical Engineering Department, IUST (2006-2008)
  10. Executive vice president, ibid (2005-2007).
  11. Technical Director of CAPE Center, IUST (2002-2005).
  12. Manager, Petroleum Industry Office (2006-2008).
  13. Consultant to leading processing and manufacturing companies.
  14. Head of Computational Fluid Dynamics Research Centre at IUST (2006-present)
  15. Chairman for the 3rd National Conference on CFD Applications in Chemical & Oil Industries, 2011.
  16. Chairman for the Second National Conference on CFD Applications in Chemical Industries, 2009.
  17. Member of the Editorial Board of Iranian Chemical Engineering Journal (2008, present)
  18. Member of the Board of Iranian Association of Chemical Engineering (2010-present)
  19. Member of the Editorial Board of International Journal of Energy & Technology (2011-Present)
  20. Chairman for 1st Iranian School of Hydrocarbon Measurement (IrSHM), 2013.
  21. Editor in Chief of Journal of Computational Chemical   and   Petroleum Engineering-JCCPE (In Process)
  22. Vice president of Technical Committee TC8 “Measurement of quantities of fluids” and president of TC 8/SC 3 “Dynamic volume and mass measurement for liquids other than water” in Iran (according to Technical Committees International Organization of Legal Metrology-OIML)
     

Teaching Experience

During my teaching career, I taught the following courses (Since 2002):
 
  1. "Computational Fluid Dynamics (CFD) Applications in Chemical Engineering" Workshop, Research Institute of Petroleum Industry (RIPI), 2006.
  2. “Computational Fluid Dynamics”, Graduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran, 2006-present.
  3. "Advance Fluid Mechanics" Graduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran, 2003-present.
  4. “Advance Transport Phenomena, CFD Application in Chemical Engineering" Graduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran, 2004-2006.
  5. "Plant Design and Economics for Chemical Engineers", Undergraduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran, 2006-2009.
  6. Chemical Plant HAZOP (HAZard and OPerability) Study, 2006-2009
  7. "Fluid Mechanic (Non-Newtonian Fluid Mechanic and Two-Phase Flow)" Undergraduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran, 2003-present.
  8. "Selection and Design of Process’s Equipments” Undergraduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran 1997-present.
  9. "Process Control" Undergraduate Course in chemical Engineering, AmirKabir University of Technology, (Tehran Polytechnic) 2001- 2002.
  10. Site Training of Engineers in National Petrochemical Co. (NPC), 1996-1998.
  11. Computer Courses in Chemical Engineering Department, AmirKabir University of Technology, (Tehran Polytechnic) 1992-1995.
     

Industrial Experience

  1. “CFD Analysis of Axial 250 Kw Pump” Rased Sanat Toseh Company, 2016.
  2. “CFD Simulation of Reactions in CTA (Crude Terephthalic Acid) Oxidation Reactor by CFD Simulation” Shahid Tondgooyan Petrochemical Company, 2016.
  3. “CFD Simulation of Gas Scrubber in Aliabad Power Plant”, Mazandaran and Golestan Regional Electric Company, 2015.
  4. “CFD simulation of Hydrodynamics in Electrical Desalter” CHAMAN Engineering Company, 2015.
  5. < > “Influence of Operational and Thermodynamic parameters on Turbine and Ultrasonic Meters by CFD Simulation” Iranian Oil Terminals Company, 2011.
  6. “Evaluation of Spargers Performance in CTA (Crude Terephthalic Acid) Oxidation Reactor by CFD Simulation” Shahid Tondgooyan Petrochemical Company, 2011.
  7. “Separation of Black Powder and Liquid Mist from Gas Transmission Pipeline”, Iranian Gas Transmission Company, 2010.
  8. “Feasibility Study for Deodorization of Odorant’s Barrels by Ozone Oxidation”, Razavi Khorasan Gas Company, 2011.
  9. "Sealer Online Rheometry Design for Automotive Industries" Iran Khodro Company, 2006.
  10. "CFD Simulation of Suspension PVC Dryer", Petrochemical Research and Technology Company, 2006.
  11. "Modeling and Simulation of Sealer Robot Nozzles", Iran Khodro Company, 2005.
  12. "Effects of Storage Conditions on Sealer Properties and Definition of Optimum Storage Condition”, Iran Khodro Company, 2005.
  13. "Experimental Preparation of Electrolytic Manganese Dioxide (EMD) and Pilot Plant Design" M.R. Golkar Naranji, S.H. Hashemabadi, Independent Project at Amirkabir University of Technology, (Tehran Polytechnic)
  14. "Development of Computer Software for Determination of Thermo physical Properties of Rubber Compounds (CORC)" S.H. Hashemabadi, B. Dabir, Kerman Tire & Rubber (Barez) CO.
  15. Study of Rotary Kiln transport Phenomena, J. Thibault, S.Gh. Etemad, S.H. Hashemabadi, Ottawa University, Canada, 2002.
  16. Designer and Advanced Inspector on Construction, Installation and Operation ofTurbocharger Part Cleaning Line, Iranian Railway company, Tehran, Iran, 1997-1999
  17. Designer and Advanced Inspector on Construction, Installation and Operation of Alum Production line Equipments with 10’000 ton /year capacity, Takestan, Iran, 1999-2001.
     

Awards

  • Among the top scientists in the world according to the citation database of the pioneers of Thomson Reuters science (ISI-ESI), 2019
  • First rank in relation to industry at the School of Chemical, Petroleum and Gas Engineering, 2018.
  • First rank in relation to industry at the School of Chemical, Petroleum and Gas Engineering, 2017.
  • Selected Professor from the Perspective of Educational Quality, Scientific and Social Practices at the School of Chemical, Petroleum and Gas Engineering, 2017.
  • Second rank in research at the School of Chemical, Petroleum and Gas Engineering, 2014.
  • The first in Iran and third people in the world in publication of paper in the field ofCFD applications in Chemical Engineering(2004-2014) (reference: Scopus)
  • Top Ph.D StudentGraduated in 2002 from Amirkabir University, Tehran, Iran
  • Pre-doctoral Fellowship, Department of Chemical Engineering, Ottawa University, Ottawa, Canada, 2001.
     
     
    Journal Publications (Indexed by ISI)
  • M. Zojaji, A. Hydarinasab, S.H. Hashemabadi, M. Mehranpour, Rheological study of the effects of size/shape of graphene oxide and SiO2 nanoparticles on shear thickening behaviour of polyethylene glycol 400-based fluid: molecular dynamics simulation, Molecular Simulation, DOI: 10.1080/08927022.2021.1992405, 2021.
  • M.A. Alaeddin, S.H. Hashemabadi, S.F. Mousavi, Numerical Study on the Effect of Circumferential Position of Ultrasonic Transducers on Ultrasonic Cross-Correlation Flowmeter Performance Under Asymmetric Air Flow Profile, Accepted for Publication in Ultrasonics, 2021.
  • E. Amini, S.M. Peyghambarzadeh, S. Zarrinabadi, S.H. Hashemabadi, Simulation of heat transfer and fluid flow of hot oil in radiation section of an industrial furnace considering coke deposition, Accepted for Publication Journal of Thermal Analysis and Calorimetry, 2021.
  • M. Rrezaeimanesh, S.M Payghambarzadeh, A.A. Ghoreyshi, S.H. Hashemabadi, A coupled CFD simulation approach for investigating the pyrolysis process in industrial naphtha thermal cracking furnaces, Accepted for Publication Chinese Journal of Chemical Engineering, 2021,
  • M. Zare, S.H. Hashemabadi, Heat Transfer at Particle-Tube Wall Contact Point: Impact of Catalyst Configuration on Hotspot, Accepted for Publication in Chemical Engineering & Technology, 2021.
  • M. Zojaji, S.H. Hashemabadi, Rheological Behavior of shear thickening fluid for graphene oxide and SiO2 Polyethylene Glycol 400 Based Fluid with Molecular Dynamics Simulation, Molecular Simulation (GMOS), Vol. 10, 1-9, 2021.
  • M. Fadaei, F. Ameli, S.H. Hashemabadi, Investigation on Different Scenarios of Two-Phase Flow Measurement Using Orifice and Coriolis Flow Meters: Experimental and Modeling Approaches, Measurement, Volume 175, 108986, 2021.
  • E. Yazdani, S.H. Hashemabadi, A. Taghizadeh, Investigation of Particulate Bed Dynamics inside a Rotating Drum using Discrete Element Method, Particulate Science and Technology, Volume 39, 8, 917-927, 2021.
  • Kh. Mohammadzadeh , S. Akbari, S. H. Hashemabadi, Parametric study of cutting transport in vertical, deviated, and horizontal wellbore using CFD simulations,  Petroleum Science and Technology, Volume 39, Issue 2, 2021.
  • Q. Azizi, S.H. Hashemabadi, Direct Pore Scale Modeling of Two-Phase Flow; Investigation the Effect of Interfacial Tension and Contact Angle, Special Topics & Reviews in Porous Media - An International Journal, Vol. 12, No. 3, 71-88, 2021.
  • Q. Azizi, S.H. Hashemabadi & S. Akbari, Experimental and numerical study of the impact of viscosity ratio and velocity on the multiphase flow in micromodels, Journal of Dispersion Science and Technology, Volume 41, Issue 14, 2020.
  • S.F. Mousavi, S.H. Hashemabadi, New Semi Three-Dimensional approach for Simulation of Lamb Wave Clamp-On Ultrasonic Gas Flowmeter, Sensor Review, Vol. 40, No. 4, 465-476, 2020.
  • S.F. Mousavi, S.H. Hashemabadi, J. Jamali, Calculation of Geometric Flow Profile Correction Factor for Flow Meter Using Semi-3D Simulation Technique, Ultrasonics, Vol. 106, 106165, 2020.
  • M. Zare, S.H. Hashemabadi, Particle-fluid heat transfer close to the bed wall: CFD simulation and experimental study of particle shape influence on the formation of hot zones, International Journal of Thermal Sciences, Vol. 150, 106223, 2020.
  • E. Yazdani, S.H. Hashemabadi, Three Dimensional Heat Transfer Investigation of Particulate Bed in a Rotary Drum by Discrete Element Method, Particuology, Vol. 51, 155-162, 2020.
  • J. Maroofi, S.H. Hashemabadi, Y. Rabbani, Investigation of the Chain Formation Effect on Thermal Conductivity of Magnetorheological Fluids, Journal of Thermophysics and Heat Transfer, Vol. 34, No. 1, 3-12, 2020.
  • S. Akbari, Kh. Mohammadzadeh, S.H. Hashemabadi, Experimental Study and CFD Investigation of Environment Friendly Drilling Fluid, Int. J. of Oil, Gas and Coal Technology, Vol. 25, No. 4, 377-399-2020.
  • H. Farahzadi, M. Shirvani and S.H. Hashemabadi, A novel technique for solid mass loading measurement in dilute gas-solid two-phase flow by vortex flow meter based on vortex shedding principles, Asia-Pacific Journal of Chemical Engineering, Vol.14, 2019.
  • B. Bazooyar, A. Shariati, M.R. Khosravi-Nikou, S.H. Hashemabadid, Numerical analysis of nitrogen oxides in turbulent lifted H2/N2 cabra jet flame issuing into a vitiated coflow, International Journal of Hydrogen Energy, Volume 44, Issue 26, 13932-13952, 2019.
  • M. Behrang, M. Shirvani, S.H. Hashemabadi, Multi-Helical-Channel dust separator: CFD simulation and experiment, Chemical Engineering Research and Design, 146, 1-10, 2019.
  • J. Maroofi, S.H. Hashemabadi, Experimental and Numerical Investigation of Parameters Influencing Anisotropic Thermal Conductivity of Magnetorheological Fluids", Heat and Mass Transfer, Vol. 55, 2751-2767, 2019.
  • E. Yazdani, S.H. Hashemabadi, The influence of cohesiveness on particulate bed segregation and mixing in rotating drum using DEM, Physica A: Statistical Mechanics and its Applications, 525, 788-797, 2019.
  • E. Yazdani, S.H. Hashemabadi, Study of Waste Tire Pyrolysis in a Rotary Kiln Reactor in a Wide Range of Pyrolysis Temperature, Waste Management, 85, 195-201, 2019.
  • E. Yazdani, S.H. Hashemabadi, DEM Simulation of Heat Transfer of Binary-Sized Particles in a Horizontal Rotating Drum, Granular Matter, 21:6, 1-11, 2019.
  • S. Foad Mousavi, S.H. Hashemabadi, H. Azizimoghadam, Design, Simulation, Fabrication and Testing of Ultrasonic Gas Flowmeter Transducer (sensor)" Sensor Review, Vol. 39 Issue: 2, pp.277-287,2019.
  • M. Zare, S.H. Hashemabadi, CFD Simulation and Experimental Validation of Tortuosity Effects on Pellet-Fluid Heat Transfer of Regularly Stacked Multi-Lobe Particles, Chemical Engineering Journal, 361, 1543–1556, 2019.
  • A. Taghizadeh, S.H. Hashemabadi, E. Yazdani, S. Akbari, Numerical analysis of restitution coefficient, rotational speed and particle size effects on the hydrodynamics of particles in a rotating drum, Granular Matter, 2018.
  • S. L. Ebrahimi, M.R. Khosravi-NiKou, S.H. Hashemabadi, Sonoreactor optimization for ultrasound assisted oxidative desulfurization of liquid hydrocarbon, Accepted for Publication at Journal of Petroleum Science and Technology, 2018.
  • N. Fadaei, A. Kasaeian, A. Akbarzadeh, S.H. Hashemabadi, Experimental investigation of solar chimney with phase change material (PCM), Renewable Energy, Vol. 123, 26-35, 2018.
  • M. Sharifzadeh, S.H. Hashemabadi, H. Afarideh and H. Khalafi, An experimental evaluation of the effect of homogenization quality as a preconditioning on oil-water two-phase volume fraction measurement accuracy using gamma-ray attenuation technique, Journal of Instrumentation, Vol. 13, 2018.
  • B. Bazooyar, S. H. Hashemabadi, Mixed Modified Fe2O3-WO3 as New Fuel Borne Catalyst (FBC) for Biodiesel Fuel Energy, Energy, Vol. 149, 438-453, 2018.
  • S. Akbari and S. H. Hashemabadi, Temperature and pressure effects of drilling fluid on cutting transport using CFD simulations, Asia-Pacific Journal of Chemical Engineering, Vol. 12(6), 980-992, 2017
  • A. Ghaffari, S.H. Hashemabadi, Parameter study and CFD analysis of head on collision and dynamic behavior of two colliding ferrofluid droplets, Smart Materials and Structures, 26(3),035010, 2017.
  • N. Malekjani, Z. Emam-Djomeh, S.H. Hashemabadi, Gh.R. Askari, Modeling Thin Layer Drying Kinetics, Moisture Diffusivity and Activation Energy of Hazelnuts during Microwave-Convective Drying, International Journal of Food Engineering, 20170100, 2017.
  • N. Malekjani, Z. Emam Djomeh, S.H. Hashemabadi, Gh.R Askari, Internal and external color development kinetics during microwave assisted fluidized bed drying of hazelnut, Color development during hazelnut drying, Journal of Agricultural Science and Technology (JAST), Vol. 19, 613-626, 2017.
  • Y. Rabbani, M. Shirvani, S.H. Hashemabadi, M. Keshavarz, Application of Artificial Neural Networks and Support Vector Regression Modeling in Prediction of Magnetorheological Fluid Rheometery, Colloids and Surfaces A: Physicochem. Eng. Aspects, vol. 520, 268-278, 2017.
  • A. Chabi, S. Zarinabadi, S.M. Peyghambarzadeh, S.H. Hashemabadi, M. Salimi, Local convective heat transfer coefficient and friction factor of CuO/water nanofluid in a microchannel heat sink, Heat and Mass Transfer, vol. 53, 661–671, 2017.
  • B. Bazooyar, A. Shariati, and S.H. Hashemabadi, Turbulent Non-Premixed Combustion of Rapeseed Methyl Ester (RME) in a Free Shear Swirl Air Flow: Simulation and Validation, Ind. Eng. Chem. Res., vol. 55, 11645-11663, 2016.
  • S. Parvizi, E. Keshavarz Alamdari, S.H. Hashemabadi, A. Sattari, M. Kavousi, Investigating Factors Affecting on the Efficiency of Dynamic Mixers, Mineral Processing and Extractive Metallurgy Review, 37(5), 342-368, 2016.
  • B. Bazooyar, A. Ghorbani, S.H. Hashemabadi, A. Shariati, NOX Formation of Biodiesel in Utility Power Plant Boilers; Part B. Comparison of NO between biodiesel and petrodiesel, Fuel, 182, 323-332, 2016.
  • A. Saffar, M. Hajighasemi, S.H. Hashemabadi, S. Noroozi, Viscous Heating in a Wind Heater Device: CFD Simulation and Experiments, Chemical Engineering Communications, 203, 1173-1178, 2016.
  • E. GhasemiKafrudi, S. H. Hashemabadi, Numerical Study on Cuttings Transport in Vertical Wells with Eccentric Drill pipe, Journal of Petroleum Science and Engineering, 140, 85-96, 2016.
  • S. M. Peyghambarzadeh, S. H. Hashemabadi, H. Saffarian, F. Shekari, Experimental study of the effect of drag reducing agent on pressure drop and thermal efficiency of an air cooler, Heat and Mass Transfer 52 (1), 63-72, 2016.
  • E. GhasemiKafrudi and S.H. Hashemabadi, Numerical Study on Effects of Drilling Mud Rheological Properties on the Transport of Drilling Cuttings, ASME Journal of Energy Resources Technology, 138 (1), 012902, 2016.
  • K. Mohammadzadeh, S.H. Hashemabadi, S. Akbari, CFD Simulation of Viscosity Modifier Effect on Cutting Transport by Oil Based Drilling Fluid in Wellbore, Journal of Natural Gas Science and Engineering, 29, 355–364, 2016.
  • B. Bazooyar, A. Shariati, S.H. Hashemabadi, Characterization and Reduction of NO during the Combustion of Biodiesel in a Semi-Industrial Boiler, Energy & Fuels, 29 (10), 6804-6814,2015.
  • A. Ghaffari,  S.H. Hashemabadi, M. Bazmi, CFD simulation of Equilibrium shape and coalescence of ferrofluid droplets subjected to uniform magnetic field, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 481, 186-198, 2015.
  • Y. Rabbani, M. Ashtiani and S.H. Hashemabadi, Experimental Study on Temperature and Magnetic Field Strength Effects on the Magnetorheological Fluid Stability and MR Effect,Vol. 11, Soft Matter, 2015.
  • M. Ashtiani, S.H. Hashemabadi, The Effect of Nano-Silica and Nano-Magnetite on the Magnetorheological Fluids Stabilization and MR Effect, Journal of Intelligent Material Systems and Structures, 1045389X15580659,2015.
  • S. Hariri, S.H. Hashemabadi, S. Noroozi, and A. Rostami, Analysis of Operational Parameters, Distorted Flow and Damaged Blade Effects on Accuracy of Industrial Crude Oil Turbine Flow Meter by CFD Techniques, Journal of Petroleum Science and Engineering, 127, 318-328, 2015.
  • M. Ashtiani, S.H. Hashemabadi, An Experimental Study on the Effect of Fatty Acid Chain Length on the Magnetorheological Fluid Stabilization and Rheological Properties, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 469, 29-35, 2015.
  • S. Tavangar, S.H. Hashemabadi, CFD Simulation for Secondary Breakup of Coal-Water Slurry Drops using OpenFOAM, Fuel Processing Technology, 132, 153-163, 2015.
  • A. Heidari, S.H. Hashemabadi, CFD Study of Diesel Oil Hydrotreating Process in the Non-isothermal Trickle Bed Reactor, Chemical Engineering Research and Design, 94, 549-564, 2015.
  • M. Ashtiani, S.H. Hashemabadi, A. Ghaffari, A Review on the Magnetorheological Fluid Synthesis and Stabilization,Journal of Magnetism and Magnetic Materials, 374, 716-730, 2015.
  • A. Ghaffari, S.H. Hashemabadi, M. Ashtiani, A Review on the Simulation and Modeling of Magnetorheological Fluids, Journal of Intelligent Material Systems and Structures, 1-24, 2015.
  • V. Delavari, S.H. Hashemabadi, CFD Simulation of Heat Transfer Enhancement of Al2O3/Water and Al2O3/Ethylene Glycol Nanofluids in a Car Radiator, Applied Thermal Engineering, 73(1), 378–388, 2014.
  • S. Toghyani, A. Kasaeian, S.H. Hashemabadi, Multi-Objective Optimization of GPU3 Stirling Engine Using Third Order Analysis, Energy Conversion and Management, 87, 521-529, 2014.
  • S.M. Peyghambarzadeh, S.H. Hashemabadi, A.R. Chabi, M. Salimi, Performance of water based CuO and Al2O3 nanofluids in a Cu-Be alloy heat sink with rectangular microchannels, Energy Conversion and Management 86, 28–38, 2014.
  • < > S. Niazi, S.H. Hashemabadi, S. Noroozi, Numerical Simulation of Operational Parameters and Sonoreactor Configurations for the Highest Possibility of Acoustic Cavitation in Crude Oil, Chemical Engineering Communications, 201, 1340-1359, 2014.
  • Y. Vermahmoudi, S.M. Peyghambarzadeh, S.H. Hashemabadi, M. Naraki,
    Experimental investigation on heat transfer performance of Fe2O3/water nanofluid in an air-finned heat exchanger, European Journal of Mechanics B/Fluids, Vol. 44, 32-41, 2014.
  • S. Niazi, S. H. Hashemabadi, M. Mirarab Razi, CFD simulation of acoustic cavitation in a crude oil upgrading sonoreactor and prediction of collapse temperature and pressure of a cavitation bubble, Chemical Engineering Research and Design, 92, 166-173, 2014.
  • M. R. Mehrnia, N. Mostoufi, S. Amiri, M. Vali, and H. Hashemabadi, The Hydrodynamics of a Bubble Column Bioreactor with Oil-based Liquids: Experiments and CFD Simulation, Energy Sources, Part A, 35:2156–2165, 2013.
  • A. Heidari, S.H. Hashemabadi, Numerical Evaluation of the Gas-Liquid Interfacial Heat Transfer in the Trickle Flow Regime of Packed Beds at the Micro and Meso-Scale, Chemical Engineering Science, Vol. 104, pp. 674-689, 2013.
  • S. Noroozi, S. Tavangar, S. H. Hashemabadi, CFD Simulation of Wall Impingement of Tear Shape Viscoplastic Drops Utilizing OpenFOAM, Applied Rheology, 23(5), 55519 (13 pages), 2013.
  • M. Bazmi, S.H. Hashemabadi, M. Bayat, Extrudate Trilobe Catalysts and Loading Effects on Pressure Drop and Dynamic Liquid Holdup in Porous Media of Trickle Bed Reactors, Transport in Porous Media, 99, 535–553, 2013.
  • F. Omidbeygi and S.H. Hashemabadi, Exact Solution and CFD Simulation of Magnetorheological Fluid Purely Tangential Flow within an Eccentric Annulus,International Journal of Mechanical Sciences, 75,26–33, 2013.
  • S. Roshdi, N. Kasiri, S.H. Hashemabadi and J. Ivakpour, Computational fluid dynamics simulation of multiphase flow in packed sieve tray of distillation column, Korean Journal of Chemical Engineering, 30(3), 563-573, 2013.
  • M. Khanali, S. Rafiee, A. Jafari and S.H. Hashemabadi, Experimental Investigation and Modeling of Plug-Flow Fluidized Bed Drying Under Steady-State Conditions, Drying Technology, 31, 414–432, 2013.
  • M. Zare, S. H. Hashemabadi, Experimental study and CFD Simulation of Wall effects on Heat transfer of an Extrudate Multi-Lobe Particle, International Communications in Heat and Mass Transfer, 43, 122–130, 2013.
  • Y. Vermahmoudi, S. M. Peyghambarzadeh, M. Naraki, and S. H. Hashemabadi, Statistical analysis of nanofluid heat transfer in a heat exchange system, Journal of Thermophysics and Heat Transfer, 27:2, 320-325, 2013.
  • M. Naraki, S.M. Peyghambarzadeh, S.H. Hashemabadi, Y. Vermahmoudi, Parametric study of overall heat transfer coefficient of CuO/Water nanofluids in a car radiator, International Journal of Thermal Sciences, 66, 82-90, 2013.
  • S.M. Peyghambarzadeh, S.H. Hashemabadi, M. Naraki, Y. Vermahmoudi, Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator, Applied Thermal Engineering, 52, 8-16, 2013.
  • S. Noroozi, S. H. Hashemabadi, A.J. Chamkha, Numerical Analysis of Drops Coalescence and Breakage Effects on De-Oiling Hydrocyclone Performance,Separation Science and Technology, 48: 991–1002, 2013.
  • M. Salimi, S. H. Hashemabadi, S. Noroozi, A. Heidari, M. Bazmi, Numerical and Experimental Study of Catalyst Loading and body Effects on Gas-Liquid Trickle flow Bed, Chemical Engineering & Technology 36(1), 43-52, 2013.
  • M. Bazmi, S.H. Hashemabadi, M. Bayat, Flow Maldistribution in Dense and Sock Loaded Trilobe Catalyst Trickle Bed Reactors: Experimental Data and Modeling Using Neural Network, Transport in Porous Media, 97, 119–132, 2013.
  • A. Hassanvand, S. H. Hashemabadi Direct Numerical Simulation of Mass Transfer from Taylor Bubble Flow through a Circular Capillary, International Journal of Heat and Mass Transfer, Volume 55, Issues 21–22, 5959–5971, 2012.
  • M. Bazmi, S. H. Hashemabadi, M. Bayat, CFD Simulation and Experimental Study of Liquid Flow Mal-Distribution through the Randomly Trickle Bed Reactors, International Communications in Heat and Mass Transfer, 39, 736–743, 2012.
  • F.S. Mirhashemi, S.H. Hashemabadi, Experimental and CFD Study of Wall Effects on Orderly Stacked Cylindrical Particles Heat Transfer in a Tube Channel, International Communications in Heat and Mass Transfer, 39(3), 449-455, 2012.
  • F. Omidbeygi, S. H.Hashemabadi, Experimental Study and CFD Simulation of Rotational Eccentric Cylinder in a Magnetorheological Fluid, Journal of Magnetism and Magnetic Materials, 324 (13), 2062-2069, 2012.
  • M. Hassan Ghajar, S.H. Hashemabadi, CFD Simulation of Capillary Condensation
    during Freeze Drying of Porous Material, Chem. Eng. Technol. 34, No. 7, 1136–1142, 2011.
  • S.M. Peyghambarzadeh, S.H. Hashemabadi, S.M. Hoseini, M. Seifi Jamnani, Experimental Study of Heat Transfer Enhancement Using Water/Ethylene Glycol Based Nanofluids as a New Coolant for Car Radiators, International Communications in Heat and Mass Transfer, 38 (9) , pp. 1283-1290, 2011.
  • M. Firouzi, Anh V. Nguyen, S.H. Hashemabadi, The effect of microhydrodynamics on bubble–particle collision interaction, Minerals Engineering, Volume 24, Issue 9, 973-986, 2011.  
  • S.M. Peyghambarzadeh, S.H. Hashemabadi, M. Seifi Jamnani and S.M. Hoseini Improving the cooling performance of automobile radiator with Al2O3/water nanofluid, Applied Thermal Engineering Vol 31,  Issue 10, 1833-1838, 2011.
  • F.S. Mirhashemi, S.H. Hashemabadi, S. Noroozi, CFD Simulation and Experimental Validation for Wall Effects on Heat Transfer of Finite Cylindrical Catalyst, International Communications in Heat and Mass Transfer, 38, 1148–1155, 2011.
  • A. Hassanvand, S. H. Hashemabadi, Direct Numerical Simulation of Interphase Mass Transfer in Gas-Liquid Multiphase systems, International Communications in Heat and Mass Transfer, 38, 943–950, 2011.
  • M. Bazmi, S. H. Hashemabadi, M. Bayat, Modification of Ergun Equation for Application in Trickle Bed Reactors Randomly Packed with Trilobe Particles Using CFD Technique” Korean Journal of Chemical Engineering, 28(6), 1340-1346 (2011).
  • S. Noroozi, S.H. Hashemabadi, CFD Analysis of Inlet Chamber Body Profile Effects on De-Oiling Hydrocyclone Efficiency, Chemical Engineering Research and Design, 89, 968–977, 2011.
  • M. Bazmi, S. H. Hashemabadi, M. Bayat, CFD Simulation and Experimental Study for Two-Phase Flow through the Trickle Bed Reactors, Sock and Dense Loaded by Trilobe Catalysts, International Communications in Heat and Mass Transfer 38, 391–397, 2011.
  • Sh. Tamjid, S.H. Hashemabadi and M. Shirvani, Fluid catalytic cracking: Prediction of catalyst attrition in a regeneration cyclone, Filtration & Separation September/October, 29-33, 2010.
  • S. Namayandeh, S.H. Hashemabadi, M.R. Moghbeli, Wet Hydrolysis of Waste Polyethylene Terephthalate Thermoplastic Resin with Sulfuric Acid and CFD Simulation for High Viscous Liquid Mixing, International Journal of Chemical Reactor Engineering, 8 2010 Article A150.
  • A. Hassanvand, S.H. Hashemabadi, M. Bayat, Evaluation of gasoline evaporation during the tank splash loading by CFD techniques, International Communications in Heat and Mass Transfer 37, 907–913, 2010.
  • M.A. Dehnavi, S. Shahhosseini, S.H. Hashemabadi, S. M. Ghafelebashi, CFD Simulation of Hydrodynamics and Heat Transfer in Gas-Phase Ethylene Polymerization Reactors, International Communications in Heat and Mass Transfer, 37, 437–442, 2010.
  • S.M. Mirnajafizadeh S.H. Hashemabadi, Analysis of Viscoelastic Fluid Flow with Temperature Dependent Properties in Plane Couette Flow and Thin Annuli, Applied Mathematical Modelling, 34, 919–930, 2010.
  • S. Noroozi, S.H. Hashemabadi, CFD Simulation of Inlet Design Effects on De-oiling Hydrocyclone Separation Efficiency, Chemical Engineering & Technology, 32, No. 12, 1885–1893, 2009.
  • M. Firouzi, S.H. Hashemabadi, Analytical Solution for Newtonian Laminar Flow Through the Concave and Convex Ducts, Journal of Fluids Engineering, 094501-6 / Vol. 131, 2009.
  • Firouzi, M., Hashemabadi, S.H., Exact solution of two phase stratified flow through the pipes for non-Newtonian Herschel-Bulkley fluids, International Communications in Heat and Mass Transfer, 36, 768–775, 2009.
  • S. Haeri, S.H. Hashemabadi, Experimental Study of Gravity-Driven Film Flow non-Newtonian Fluids, Chemical Engineering Communications 196 (5), pp. 519-529, 2009.
  • S.M. Mirnajafizadeh S.H. Hashemabadi, Secondary Flows of Simplified Phan-Thien Tanner (SPTT) non-linear Viscoelastic Fluid between Parallel Rotating Disks , Macromolecular Symposia 274 (1), pp. 55-64, 2008.
  • S.H. Hashemabadi, A.H. Ahmadi Motlagh, 3D CFD Simulation and Experimental Validation of Particle-to-Fluid Heat Transfer in a Randomly Packed Bed of Cylindrical Particles, International Communications Heat and Mass Transfer, Volume 35, Issue 9, Pages 1183-1189, 2008.
  • M.A. Dehnavi, S. Shahhosseini, S.H. Hashemabadi, S.M. Ghafelebashi, CFD based evaluation of polymer particles heat transfer coefficient in gas phasepolymerization reactors, International Communications in Heat and Mass Transfer 35 (10), 1375-1379, 2008.
  • Y. Behjat, M.A. Dehnavi, S. Shahhosseini, S.H. Hashemabadi, Heat Transfer of Polymer Particles in Gas-Phase Polymerization Reactors, International Journal of Chemical Reactor Engineering, Vol. 6, Article A81, 2008.
  • S. Haeri, S.H. Hashemabadi, Three Dimensional CFD Simulation and Experimental Study of Power Law Fluid Spreading on Inclined Plates, International Communications in Heat and Mass Transfer 35 (8), 1041-1047, 2008.
  • A.H. Ahmadi Motlagh, S.H. Hashemabadi, CFD Based Evaluation of Heat Transfer Coefficient from Cylindrical Particles, International Communications in Heat and Mass Transfer 35 (5), pp. 674-680, 2008.
  • M. Firouzi, S.H. Hashemabadi, Analytical Solution for Newtonian-Bingham Plastic Two-Phase Pressure Driven Stratified Flow through the Circular Ducts, International Communications in Heat and Mass Transfer 35 (5), pp. 666-673, 2008.
  • Yaghoub Behjat, Shahrokh Shahhosseini and S. Hassan Hashemabadi, CFD modeling of hydrodynamic and heat transfer in fluidized bed reactors, International Communications in Heat and Mass Transfer, 35 (2008) 357–368.
  • Garnavi L., Kasiri N. and Hashemabadi S.H., Mathematical modeling of a continuous fluidized bed dryer, International Communications in Heat and Mass Transfer, Vol. 33 (5) pp 666-675, 2006.
  • Hashemabadi S.H. and Etemad S.Gh., Effect of rounded corners on the secondary flow of viscoelastic fluids through non-circular ducts, International Journal of Heat and Mass Transfer, Vol 49/11-12 pp 1986-1990, 2006.
  • Mirzazadeh M., Escudier M.P., Rashidi F., Hashemabadi S.H., Analytical Solution of purely tangential flow for PTT viscoelastic fluid through concentric annulus, Journal of Non-Newtonian Fluid Mechanics Vol. 129, pp. 88–97, 2005.
  • Hashemabadi S.H., Etemad S.Gh. and Thibault J., Analytical Solution of Viscoelastic Fluid Flow and Heat Transfer throughan Annulus, Heat Transfer Engineering, Vol. 26(2), pp. 1-5, 2005.
  • Hashemabadi S.H., Etemad S.Gh. and Thibault J., Forced convection heat transfer of Couette-Poiseulle flow of nonlinear viscoelastic fluids between parallel plates, Int. J. of Heat and Mass Transfer, Vol. 47, pp. 3985-3991, 2004.
  • Hashemabadi S.H., Etemad S.Gh., Thibault, J. and Golkar Naranji M.R., Analytical solution for dynamics pressurization of viscoelastic fluids, International Journal of Heat and Fluid Flow Vol. 24, pp.137-144, 2003.
  • Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Mathematical modeling of laminar forced convection of simplified Phan-Thien-Tanner (SPTT) fluid between moving parallel plates, International Communications Heat and Mass Transfer, Vol. 30, No. 2, pp. 197-205, 2003.
  • Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Laminar flow of non-Newtonian fluid in right triangular ducts, International Communications Heat and Mass Transfer, Vol. 30, No. 1, pp. 53-60, 2003.
  • Etemad S.Gh, Thibault, J. and Hahsemabadi, S.H., Calculation the Pitot tube correction factor for Newtonian and non-Newtonian fluid, ISA Transaction, Vol. 42, pp. 1-8, 2003.
     
     
    Selected Journal Publications
  • V. Kermani, S.H. Hashemabadi, CFD Study for Influence of Geometrical Parameters on Gas Flow Sharing between Main and Bypass Streams in Domestic Microthermal Flowmeters, Accepted for Publication in Petroleum Research, 2021.
  • S. Parvizi, S. Aosati, E. Keshavarz Alamdari, S.H. Hashemabadi, Evaluation of Breakage and Coalescence Kernels Constants for the Droplets in the Mixer Tank of the Copper Solvent Extraction Unit, Journal of Particle Science & Technology, Vol. 6, 13-23, 2020.
  • H. Farahzadi, S.H. Hashemabadi, M. Shirvani, CFD Simulation and Experimental Study of Vortex Flowmeter Performance in Gas-Solid Flow, Modares Mechanical Engineering, Vol. 20, No. 9, 2263-2274, 2020.
  • M. Fadaei, F. Ameli, S.H. Hashemabadi, Experimental Study and CFD Simulation of Two-Phase flow Measurement by Orifice Meter, Petroleum Research, Vol. 108, 85-96, 2019.
  • S.F. Mousavi, S.H. Hashemabadi, Piezoceramic Element Design and Fabrication for Ultrasonic Transducer of Gas Meter, Journal of Chemical and Petroleum Engineering, Vol. 53, No. 1, 63-71, 2019. 
  • S. Namayandeh, Z. Emam Jomeh, S.H. Hashemabadi, S.M.A. Ebrahimzadeh, Optimization of Temperature, Maltodextrin and Atomization of Pressure in Spray Dryer for SourTea (Hibiscus Sabdariffa), Journal of Food Engineering Research, Vol. 66, 155-172, 2019.
  • S.H. Hashemabadi, A. Akbari, CFD Based Simulation as a New Tool and Efficient for Design of Heat Exchangers, Heat Exchangers, 109, 4-10, 2019.
  • B. Rahmati, S.H. Hashemabadi, M. Salemi Mojarrad, A.R. Asadi, Development of a New Model for Prediction of Gas Turbine Flowmeter Performance Using CFD, Modares Mechanical Engineering, 20(7), 1933-1941, 2020.
  • B. Sharifi, S. H. Hashemabadi, CFD Simulation of Transit Time Ultrasonic Flow Meter Performance with PZT-5A Piezoelectric for Light Crude Oil, Modares Mechanical Engineering, 9(16), 1337-1346, 2019.
  • F. Asaadi, M. Eyvazi, M. Shirvani, S. H. Hashemabadi, Experimental and numerical study of spiral-channels dust separator for separation of black powder of gas pipeline, Modares Mechanical Engineering, 18(8), 61-70, 2018.
  • S.H. Hashemabadi, M. Karamzadeh, M. Lotfi, The share of fuel in the cost of cement and the role of accurate measurement in industry, Cement, Concrete and Additives, 245, 78, 2018.
  • M. Sharifzadeh, H. Khalafi, S.H. Hashemabadi, Measurement of Phase Fraction in Water-Gasoil Mixture by Using of Gama Density Meter, Journal of Oil and Gas Exploration and Production (Persian), Vol. 146, 71-78, 2017.
  • Soroush Parvizi, S.H. Hashemabadi, CFD Simulation and Experimental Study of Impeller Speed and Clearance Effects in the Mixer of Copper Solvent Extraction Unit, Indian Journal of Science and Technology, 9(S1), 2017.
  • M. Mahmoudian, A. Ghaemi, S.H. Hashemabadi, Prediction of Red Mud Bound-Soda Losses in Bayer Process Using Neural Networks, Iranian Journal of Chemical Engineering, Vol. 13, No. 2, 46-56, 2016.
  • A. Hassanvand, S.H. Hashemabadi,Evaluation of Recirculation Time in Bubble Train Flow by Using Direct Numerical Simulation, Iranian Journal of Chemistry and Chemical Engineering, Vol. 35, No. 3, 93-104, 2016
  • S. Akbari,S.H. Hashemabadi, B. Pirmoradian, Design and Development of Simulator Software for Drilling Flow through Vertical and Inclined Wells, Oil & Gas Exploration and Production (Persian), 135, 73-79, 2016.
  • Heidari, S.H. Hashemabadi, Development of CFD model for simulation of HDS and HDA reactions in TBR, Naft Research, Vol. 25, No. 83, 123-136, 2016.
  • B. Bazooyar, A. Shariati, S.H. Hashemabadi, Economy of a utility boiler power plant fuelled with vegetable oil, biodiesel, petrodiesel and their prevalent blends, Sustainable Production and Consumption, Vol. 3, 1-7, 2015.
  • M. Ghamari, S.H. Hashemabadi, CFD Simulation of Phthalic Anhydride Reactor Performance in Farabi Petrochemical Company, Journal of Chemical Engineering (Persian), Vol. 14, No. 80, 46-53, 2015.
  • S. Ghasemi Kafarvedi and S.H. Hashemabadi, Numerical and Analytical Study of Drilling Mud Flow through the Annulus with Cross non-Newtonian Model, Naft Research, Vol. 81, 1-14, 2015.
  • A. Heidari, S. H. Hashemabadi, CFD Simulation of Reactive Flows, Journal of Chemical Engineering (Persian), Vol. 14, No. 78, 73-85, 2015.
  • M. Salimi, S.M. Peyghambarzadeh, S.H. Hashemabadi, A. Chabi, Experimental Study of Forced Heat Transfer of Al2O3/Water NanoFluid in Micro Heat Exchanger, Modares Mechanical Engineering (In Persian), Vol. 15, No. 2, 270-280, 2015.
  • S. Tavangar, S.H. Hashemabadi and A. Saberimoghadam, Reduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam, Iranian Journal of Chemical Engineering, Vol. 11, No. 2, 29-42, 2014.
  • S.H. Hashemabadi, F. Mirhashemi, A New Correlation for Drag Coefficient of Extrudate Quadralobe Particles by CFD Simulation, Iranian Journal of Chemical Engineering, Vol. 11, No. 3, 23-33, 2014.
  • M. Safaei Rad, S.H. Hashemabadi, P. Nouri Asl, CFD Simulation of Gas-Particle Helical Separator, Journal of Chemical Engineering (Persian), Vol. 13 - No. 75, 23-28, 2014.
  • S.H. Hashemabadi, F. Ghaderzadeh, F. Taghipour, CFD Simulation of UV Disinfection Reactor for Applesauce with a Low UV Absorption Coefficient,  Journal of Chemical and Petroleum Engineering, Vol. 48, No.2, 103-116, 2014.
  • M. Ghaeizadeh, S. H. Hashemabadi, M. Bayat Influence of Operating Condition on Asphaltene Separation from Heavy Crude Oil by Hydrocyclone with CFD Simulation, Journal of Chemical Engineering (Persian), Vol. 12, No. 71, 47-55, 2014.
  • S. H. Hashemabadi, A. Rostami, Effects of Blade Fracture and Flow Distortion on Turbine Flowmeter Factor by CFD Simulation, Journal of Mechanical Engineering (Persian), 23(94), 74-80, 2014.
  • S. Pahlevani, S. H. Hashemabadi, Review of Three Phase Reactor CFD Simulations and Existing Challenges, Iranian Journal of Chemical Engineering (Persian), Vol. 13, No. 72, 4-14, 2014.
  • S. Pahlevani, S. H. Hashemabadi, A. Heidari, CFD Simulation of Slurry-Bubble CTA Production Agitated Reactor of Shahid Tondgooyan Petrochemical Complex (STPC), Naft Research, 79, 83-94, 2014.
  • S.H. Hashemabadi, V. Esmati Paghaleh, S. Zeinalabedin, Review on Non-Invasive Ultrasonic Tomography for GasLiquid Flow Analyzing and Using in Validation of CFD Simulations, Journal of Chemical Engineering (Persian), Vol. 13 - No. 74, 19-27, 2014.
  • S. H. Hashemabadi, H. Sheikhani, S. I. Pishbin, Empirical Study and CFD Simulation of Nox Production and Burner Performance for Natural Gas City Gate Station Heaters, International Journal of Energy & Technology 5(21), 1-6, 2013.
  • S.H. Hashemabadi, M. Eftekhardadkhah, Effect of Bubble/Droplet Morphology and Slippage on Attachment Induction Time in De-oiling Flotation Process, Journal of Chemical and Petroleum Engineering (JChPE), University of Tehran, Vol. 47, No.1, 1-12, 2013.
  • A. Hassanvand and S.H. Hashemabadi Semi-Analytical Solution of Evaporative Cooling of the Thin Liquid Falling Film over an Inclined Plate, International Journal of Energy & Technology, 5 (13), 1–8, 2013.
  • F. Ghaderzadeh, S. H. Hashemabadi, Survey of CFD Simulation for UltravioletWater Disinfection Reactors, Journal of Chemical Engineering (Persian), Vol. 11, No. 65, 2013.
  • M. Bazmi, S.H. Hashemabadi and M. Bayat, Development of a Pellet Scale Model for Trickle Bed Reactor Using CFD Techniques, Journal of Petroleum Science and Technology, 3(1), 21-30, 2013.
  • M. Moshtaghian, S. H. Hashemabadi, Experimental Study and CFD Simulation of Decoking Hydrocyclone in Jam Petrochemical Company, Journal of Chemical Engineering (Persian), 12(68), 56-65, 2013.
  • M. Karimi, S. H. Hashemabadi, Simulation of Flow Hydrodynamics in Oil-Water Cylindrical Cyclone Compact Separator Utilizing CFD Techniques, Petroleum Research, 23(73), 65-80, 2013.
  • M. Khanali, Sh. Rafiee, A. Jafari, S.H. Hashemabadi and A. Banisharif, Mathematical modeling of fluidized bed drying of rough rice (Oryza sativa L.) grain, Journal of Agricultural Technology Vol. 8(3): 795-810, 2012.
  • A. Rostami, S.H. Hashemabadi, Influence of Operational Parameters on Turbine Flowmeter Accuracy by CFD simulation, Petroleum Research, Vol.71, 92-103, 2012.
  • S.H. Hashemabadi and M. Ghamari, Analysis of Bidirectional Prover Performance for Calibration of Oil Industry Flow Meters by CFD Simulation, Farayandno (Persian), 39, 34-41, 2012.
  • S. H. Hashemabadia, M. Ghamari, Three Dimensional Simulation of Crude Oil Pipe Prover by CFD Techniques, Journal of Mechanical Engineering (Persian)Vol. 20, No. 78, 2012.
  • S. Tavangar Roosta, S. H. Hashemabadi, A. Saberimoghadam, Experimental Study of Rheological Properties of Water-Carbopol Microgel, Journal of Separation & Transport phenomena (Persian), Vol. 22, No. 1, 2012.
  • S. Niazi, S.H. Hashemabadi, CFD Simulation of a Sono-Reactor Hydrodynamic for Maximum Intensity of Acoustic Cavitation, Iranian Journal of Chemical Engineering (Persian), Vol. 10, No. 58, 72-78, 2012.
  • A. Kolivand, S.H. Hashemabadi, Effect of Cylindrical Section on Dewatering Hydrocyclone Performance by CFD Simulation, Iranian Journal of Chemical Engineering (Persian), Vol. 11, No. 60, 2012.
  • A. Kolivand, S.H. Hashemabadi, Investigation of Operating Condition on Dewatering Hydrocyclone PerformanceUsing CFD Simulation, Journal of Separation Science and Engineering, Vol. 3, No. 2, pp. 21-34 2012.
  • F. Mirhashemi, S.H. Hashemabadi, Experimental and CFD Simulation of wall effects on flow through the bed loaded by Cylindrical Particles, Farayandno (Persian), 33, 66-73, 2011.
  • S.H. Hashemabadi, A. Rostami, M. Hajilari, M. Tamadoni, F. Aghili, Technical and Economical Comparing of Various Flowmeter Devices, Farayandno (Persian), No. 29&30, 62-70, 2011.
  • M. Karimi, S. H. Hashemabadi CFD Simulation of Turbulent Flow in a Gas-Liquid Cylindrical Cyclone Separator (GLCC), Journal of Separation & Transport phenomena (Persian), Vol. 21, No. 2, 91-104, 2011.
  • M. Eftekhardadkhah, S.H. Hashemabadi, Influence of Salinity, Surfactants and Power of Ultrasonic Homogenizer on Droplet Size Distribution of Tehran Refinery Crude Oil/Water Emulsions, Iranian Journal of Chemical Engineering (English), Vol. 8, No. 3, 55-63, 2011.
  • A. Hassanvand, S. H. Hashemabadi, CFD Simulation of Pre-Polymer Pneumatic Conveying and Calculation of their Saltation velocity, Iranian Journal of Chemistry & Chemical Engineering (IJCCE) (Persian), Vol. 30, No. 1, 43-52, 2011.
  • Fatemeh Omidbeygi, Seyed Hassan Hashemabadi, Smart Fluids, Their Properties and CFD Simulation of ElectroRheological Fluid between Two Cylinders, Iranian Chemical Engineering Journal (Persian), Vol. 10 - No. 56, 107-114, (2011).
  • H. Boortalari, S.H. Hashemabadi, F. Marzpour, Prediction of Rheological Properties of Some Linear Hydrocarbons Using Molecular Dynamics Simulation, Petroleum Research, 64, 3-11, 2011.
  • M. Hassan Ghajar, S.H. Hashemabadi, A CFD Based Correlation for Effective Vapor Diffusivity of Porous Gelatin in Freeze drying Process, Iranian Chemical Engineering Journal (Persian), Vol. 9 - No. 51, 63-69, (2010).
  • S.M. Mirahmadi, S.H. Hashemabadi, Applications of Lattice BoltzmannMethod in CFD Simulations, Iranian Chemical Engineering Journal (Persian), Vol. 9 - No. 49, 71-83, (2010).
  • S.M. Mirnajafizadeh and S.H. Hashemabadi, Analytical Solution of Simplified Phan-Thien Tanner Fluid between Nearly Parallel Plates of a Small Inclination, Journal of Applied Sciences, 7 (9): 1271-1278, 2007.
  • Y. Behjat, M.A. Dehnavi, S. Shah Hosseini, S.H. Hashemabadi, Investigation of heat transfer from polymer particles in gas phase polymerization reactors with CFD analysis, Petroleum Research, Vol 17, 3-12, 2007.
  • Y. Behjat, S. Shahhosseini, S.H. Hashemabadi, M.A. Dehnavi, CFD Simulation of Gas-Solid Bubble Column, Iranian Chemical Engineering Journal (Persian), Vol. 5 - No. 24 (2006).
  • M. Ajam Hassani, S.H. Hashemabadi, A Correlation for Pipes Economical Diameter Calculation Based on Domestic Expenses Analysis, Iranian Chemical Engineering Journal (Persian), Vol. 4 - No. 20, 16-21, (2005).
  • H.R. Asghari, S.H. Hashemabadi, N. Kasiri, Secondary Step Modeling of Freeze Drying for Different Geometrical Shapes and Heat Boundary Conditions, Iranian Chemical Engineering Journal (Persian), Vol. 4 - No. 20, 71-79, (2005).
  • M.A. Dehnavi, S.H. Hashemabadi, A. Alizadeh, Design of Fluidized Bed Dryer by CFD Techniques, Iranian Chemical Engineering Journal (Persian), Vol. 4 - No. 15, 55-65, (2005).
     
     
    Selected Conference Publications
  • S.H. Hashemabadi, Fiscal Measurement and Selection of Proper Meters for Measuring Fluid Flow, Keynote Speaking at 16th Iranian Chemical Engineering Congress, Amirkabir University, Tehran, Iran, 2019.
  • S.F. Mousavi, S. H. Hashemabadi, Numerical Simulation Based Design and Fabrication of Piezoceramic Element for Transducer of Ultrasonic Gas Meter, The 9th National Conference on CFD Applications in Chemical and Petroleum Industries, Tehran University, 2018.
  • B. Rahmati, S. H. Hashemabadi, CFD Simulation for Effect of Operational Pressure on Gas Turbine Flow Meter Performance Curve, The 9th National Conference on CFD Applications in Chemical and Petroleum Industries, Tehran University, 2018.
  • B. Sharifi, S. H. Hashemabadi, CFD Simulation for Speed of Sound in Light Crude Oil in Transit Time Ultrasonic Flow Meter with PZT-5A Piezoelectric, The 9th National Conference on CFD Applications in Chemical and Petroleum Industries, Tehran University, 2018.
  • S. H. Hashemabadi, M. Karamzadeh, M. Lotfi,  The share of fuel in the price of cement and the role of measurement in the industry, Keynote Speaking at 4th National Cement Industry Conference, Tehran, 2018.
  • S. H. Hashemabadi, J. Maroofi, Magnetorheological Fluids: Synthesis, Applications and Their Performance Simulations, Keynote Speaking at 3rd Iranian Society Rheology Annual Conference, Amirkabir University, 2018.
  • S. H. Hashemabadi, M. Zare, A review on One Decade CFD simulation of Packed Bed Reactors, Keynote Speaking at 8th National Conference on CFD Applications in Chemical & Petroleum Industries, Tarbiat Modares University, Tehran, 2017.
  • A. Heidari, S.H. Hashemabadi, CFD Simulation of Gas and Liquid Velocity Effect on Trickle Bed Reactor Pressure Drop and Liquid Hold Up, 8th National Conference on CFD Applications in Chemical & Petroleum Industries, Tarbiat Modares University, Tehran, 2017.
  • A. Daneshgar, S.H. Hashemabadi, DEM-LBM Simulation of Magnetorheological Fluids: Microstructural Study, 8th National Conference on CFD Applications in Chemical & Petroleum Industries, Tarbiat Modares  University, Tehran, 2017.
  • M.A. Alaedin, S.H. Hashemabadi, Correction of ISO 9300 Standard for Calculation of Discharge Coefficient of Sonic Nozzle by Utilization of CFD Simulation, 3rd Flow Measurement National Conference in Oil, Gas, Refinery, Petrochemical and Water Industries, Iran University of Science and Technology, Tehran, 2016.
  • F. Armand, S.H. Hashemabadi, Analysis of Modern Methods for Gas Ultrasonic Flowmeter Calibration Factor, 3rd Flow Measurement National Conference in Oil, Gas, Refinery, Petrochemical and Water Industries, Iran University of Science and Technology, Tehran, 2016.
  • A. Ghaffari, S.H. Hashemabadi, CFD investigation of the dynamic behavior of two colliding ferrofluid droplets, The 15th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, Incheon, Korea, 2016.
  • Z. Khodabakhshi, S.H. Hashemabadi, Synthesis and Stability of Water-Based Ferrofluid in Physiological Conditions, The 15th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, Incheon, Korea, 2016.
  • N. Malekjani,, Z. Emam-Djomeh,, S.H. Hashemabadi, Gh.R. Askari, Mathematical Modeling Of Microwave Assisted Fluidized Bed Drying Of Hazelnuts, 28th International Food Operations and Processing Simulation Workshop (FoodOPS 2016), Larnaca, Cyprus, 2016.
  • S.H. Hashemabadi, Z. Khodababkhshi, M. Ebrahimi and S. Azademafi, Need to Establish National Reference Accredited Calibration Laboratories for Fluid Flow Measurement Validation, Challenges and Future Horizon, The 8th Wourld Metrology Day and The 1th Iranian Metrology Conference, WMD-IMC, National Metrology Center of Iran & Standard Research Institute, Tehran, Iran, 2016.
  • M. Zare, S. H. Hashemabadi, Experimental study and CFD Simulation of particle type on heat transfer in the near-wall region, 7th National Conference on CFD Applications in Chemical & Petroleum Industries, Shahid Bahonar University, Kerman, 2016.
  • M.A. Alaeddin, S.H. Hashemabadi, Analysis of Sonic Nozzle Operation and Design by CFD Simulation, 7th National Conference on CFD Applications in Chemical & Petroleum Industries, Shahid Bahonar University, Kerman, 2016.
  • H. Farahzadi S.H. Hashemabadi, A New Model for Prediction Velocity Profile and Wall Function for CFD Simulation of Dilute Gas-Particle Two-Phase Flows through the Pipes, Keynote Speaking at 7th National Conference on CFD Applications in Chemical & Petroleum Industries, Shahid Bahonar University, Kerman, 2016.
  • M. Behrang, M. Shirvani, S.H. Hashemabadi, CFD Simulation of Pressure Drop and Separation Efficiency of a Helical-Channel-Contracting-Flow (HCCF) Gas-Solid Separator, The 9th International Chemical Engineering Congress & Exhibition (IChEC), Shiraz, Iran, 2016.
  • M. Saeedi, S.H. Hashemabadi, S. Yazdani, CFD Simulation of Hydrodynamics and Heat Transfer in Waste Polymer Pyrolysis Reactor, The 6th National Conference on CFD Applications in Chemical & Petroleum Industries, Isfahan University of Technology, 2015.
  • A. Ghaffari, S.H. Hashemabadi,Simulation of Two Magnetic Droplets Coalescence in Uniform Magnetic Field,The 6th National Conference on CFD Applications in Chemical & Petroleum Industries, Isfahan University of Technology, 2015.
  • M. Narimani, S.H. Hashemabadi, N. Kasiri, CFD Simulation of Water-Oil Annular Flow in Vertical Pipe, 15th National Congress of Chemical Engineering, University of Tehran, 2015.
  • Y. Rabbani, S.H. Hashemabadi, M. Ashtiani, Experimental Study for Influence of Temperature and Magnetic Field Strength on Magnetorheological Fluid Behavior, 15th National Congress of Chemical Engineering, University of Tehran, 2015.
  • M. Shirani, S.H. Hashemabadi, Analysis of Rheological Properties of Magnetorheological Shear Thickening Fluid, 15th National Congress of Chemical Engineering, University of Tehran, 2015.
  • S.H. Hashemabadi, M. Tavasoli, Z. Abdolmaleki, Kaveh Soleimani Deilamani, CFD Simulation of Trapped Gas Exposed to Fire Behavior for Prediction of Discharge Temperature of PSVs. The 2nd conference on Heat and Mass Transfer, Semnan University, 19-20, 2014.
  • S. Akbari, S.H. Hashemabadi, K. Mohammadzadeh, CFD applications in Drilling Industries, 2nd National Congress in Drilling Industries, 2015.
  • E. Hajimohammadi, S.H. Hashemabadi, E. GhasemiKafrudi, Effect of Electric Field on Hydrocyclone Separation Efficiency of Silica Particles from Water with CFD Techniques, 5th National Conference on CFD Applications in Chemical & Petroleum Industries, Iran University of Science and Technology, 2014.
  • < > H. Abbasi , S. Noroozi and S.H. Hashemabadi, Hydrodynamics Survey of Desalter using CFD simulation, 5th National Conference on CFD Applications in Chemical & Petroleum Industries, Iran University of Science and Technology, 2014.
  • Z. Khodabakhshi, S.H. Hashemabadi, Synthesis and Colloidal Stabilization of WaterBased Ferrofluid in Magnetic Hyperthermia, 14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR) Universidad de Granada, Spain, 2014.
  • M. Ashtiani, S.H. Hashemabadi, The Effect of Adding Nano-Silica and NanoMagnetite on the Magnetorheological Fluids Stabilization and MR Effect. 14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR) Universidad de Granada, Spain, 2014.
  • A. Ghaffari, S.H. Hashemabadi, M. Bazmi, CFD Simulation of Ferrofluid Droplets Coalescence under the Effect of Uniform Magnetic Field. 14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR) Universidad de Granada, Spain, 2014.
  • A. Ghaffari, S.H. Hashemabadi, Analysis of Vane Rheometer Flow Curve for Low Viscosity Fluids by CFD simulation, The 8th International Chemical Engineering Congress & Exhibition (IChEC), Kish, Iran, 24-27 February, 2014.
  • M.H. Rahimizadeh, S.H. Hashemabadi, Application of Hybrid Multizonal/CFD Approach for Simulation of Large Scale Multiphase Processes, The 8th International Chemical Engineering Congress & Exhibition (IChEC), Kish, Iran, 24-27 February, 2014.
  • M. Ashtiani, S.H. Hashemabadi and M. Shirvani, Experimental Study of Stearic Acid Effect on Stabilization of Magnetorheological Fluids (MRFs), The 8th International Chemical Engineering Congress & Exhibition (IChEC), Kish, Iran, 24-27 February, 2014
  • S. H. Hashemabadi, V. Esmati, M. Zare, Introduction to Multiphase Flow Meters, The first Iranian School of Hydrocarbon Measurement (IrSHM), Iran University of Science and Technology, 2013.
  • S. H. Hashemabadi, S. Hariri, Introduction to Turbine Flow Meter Simulator, The first Iranian School of Hydrocarbon Measurement (IrSHM), Iran University of Science and Technology, 2013.
  • S. H. Hashemabadi, S. Noroozi, Introduction to Ultrasonic Flow Meter Simulator, The first Iranian School of Hydrocarbon Measurement (IrSHM), Iran University of Science and Technology, 2013.
  • R. Kaviani Sanami, M. Shirvani, S. H. Hashemabadi, Experimental Study and CFD Simulation of Turbulent Flow through a New Helical Separator, 15th Fluid Dynamics Conference, Hormozgan University, 2013.
  • M.H. Rahimizadeh, S. H. Hashemabadi, Utilization of Hybrid Method of Multizonal/CFD simulation for Large Scale Processes, 15th Fluid Dynamics Conference, Hormozgan University, 2013.
  • E. Hajimohammadi, S. H. Hashemabadi, M. Bayat, CFD simulation and experimental study of the effect of pressure on the hydrocyclone efficiency of Asphaltene separation from crude oil, 15th Fluid Dynamics Conference, Hormozgan University, 2013.
  • B. Jamshidi, S. H. Hashemabadi, Field Study and Simulation of Two-Phase Flow
    Sea Line in South Pars Gas Complex, 14th National Chemical Engineering Congress (IChEC), Tehran, Iran, 2012.
  • M. Zare, S. H. Hashemabadi, Experimental Study and CFD simulation of wall effects on Multilobe particle heat transfer, 14th National Chemical Engineering Congress (IChEC), Tehran,Iran,2012.
  • M. Safaei, Hashemabadi, CFD simulation of gas-particle two phase flow through the rectangular helical duct, The 14th National Chemical Engineering Congress (IChEC), Tehran,Iran, 2012.
  • F. Omidbeygi, S. H.Hashemabadi, CFD Simulation of a Magnetorheological Fluid Flow in Eccentric Annuli with Inner Cylinder Rotation, 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012), Ankara, Turkey, 2012.
  • F. Omidbeygi, S. H.Hashemabadi, Analytical Solution of Magnetorheological Fluid Purely Tangential Flow within an Eccentric Annulus, 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012), Ankara, Turkey, 2012.
  • S.H. Hashemabadi, Application of CFD Simulations in Industry and Challenges Ahead, Keynote Speaker at 4th National Conference on CFD Applications in Chemical & Petroleum Industries, The PetroleumUniversityof Technology, Iran, 2012.
  • A. Heidari, S.H. Hashemabadi CFD Simulation of Catalysts Wetting Efficiency and Distribution in Trickle Bed Reactor, The 4th National Conference on CFD Applications in Chemical & Petroleum Industries, The PetroleumUniversityof Technology, Iran, 2012.
  • < > S. Tavangar, S.H. Hashemabadi, A. Saberimoghadam, Experimental Analysis of Rib Influence on a Non-Newtonian Fluid Atomization, 20th Annual International Conference on Mechanical Engineering (ISME2012), Shiraz, 2012.
  • M. Salimi, A. Heidari, S.H. Hashemabadi, S. Noroozi, CFD Simulation of Wall Effects on Gas-Liquid Two Phase Flow in Fixed Bed Reactor, 20th Annual International Conference on Mechanical Engineering (ISME2012), Shiraz, 2012.
  • S. Eshghi, S. H. Hashemabadi, Experimental Study of Droplet Size Effect in Low Concentration on the Deoiling Hydrocyclone Separation Performance, The 3rd Conference of Separation Science and Engineering, Zahedan, Iran, 2012.
  • M. Ghaeizadeh, S. H. Hashemabadi, M. Bayat, Influence of Hydrocarbon Cyclone Geometry on Asphaltene Separation from Heavy Crude Oil by CFD Simulation, The 3rd Conference of Separation Science and Engineering, Zahedan, Iran, 2012.
  • S. Rezaie, S.H. Hashemabadi, Evaluating the Effect of Vortex Finder Geometry on Separation Performance of Black Powder-Natural Gas Cyclone by CFD Simulation, The 3rd Conference of Separation Science and Engineering, Zahedan, Iran, 2012.
  • H. Sheikhani, S.H. Hashemabadi, S.I. Pishbin, Evaluation of Performance and Nox Pollutant in City Gate Station Heaters by CFD Simulation, Fuel & Combustion Conference of Iran, University of Kashan, 2012.
  • S. Noroozi; S. H. Hashemabadi, Study of Temperature, Flow rate and Crude Oil Properties Effects on Ultrasonic Flow Meters Accuracy by CFD Simulation, Proc. of the 14th Asia Pacific Confederation of Chemical Engineering Congress, Singapore, February 2012.
  • A. Rostami; S. H. Hashemabadi, Analysis of Operational Parameter Effects on Crude Oil Turbine Meter Accuracy Using CFD simulation, Proc. of the 14th Asia Pacific Confederation of Chemical Engineering Congress, Singapore, February 2012.
  • H. Barekatain, S.H., Hashemabadi, Improving of mixing by Submerged Rotary Jet (SRJ) system in a large industrial storage tank by CFD techniques, 11thInternational Conference of Numerical Analysis and Applied Mathematics (ICNAAM), AIP Conference Proceedings, Greece, 2011.
  • A. Hassanvand, S. H. Hashemabadi, CFD Simulation of Taylor Bubble Mass Transfer in Monolith Reactors, The 7th International Chemical Engineering Congress & Exhibition (IChEC), Kish, Iran, 21-24 November, 2011.
  • M. Hasheminia, M. Haghshenasfard, S.Gh. Etemad, S. Hassan Hashemabadi, Forced Boiling of Nanofluids, Effects of Contact Angle and Surface Wettability, 3rd Micro and Nano Flows Conference, Thessaloniki, Greece, 22-24 August 2011.
  • S. Pahlevani, S.H. Hashemabadi, Evaluation of Multiphase Approches and Turbulence Models for Industrial CFD Simulation of Stirred Bubble Column Reactors, The 7th International Chemical Engineering Congress & Exhibition (IChEC), Kish, Iran, 21-24 November, 2011.
  • S. Rezaie, S.H. Hashemabadi, 3D CFD Simulation for Black Powder-Natural Gas Cyclone Separator in Qom Compressor Station, The 7th International Chemical Engineering Congress & Exhibition (IChEC), Kish, Iran, 21-24 November, 2011
  • F. Omidbeygi, S. H. Hashemabadi, Analysis of Purely Tangential Flow of MagnetoRheological Fluid within a Concentric Annulus by CFD Simulation, The 3rd National Conference on CFD Applications in Chemical and Oil Industries, Iran University of Science and Technology, Tehran, 2011.
  • A. Hassanvand, S. H. Hashemabadi, CFD Simulation of Dynamic Mass Transfer from Taylor Bubble in Circular Capillary, The 3rd National Conference on CFD Applications in Chemical and Oil Industries, Iran University of Science and Technology, Tehran, 2011.
  • Rostami, S. H. Hashemabadi, Prediction of Cavitation Phenomenon in Crude Oil Turbine Flow Meters Utilizing CFD Simulation, The 3rd National Conference on CFD Applications in Chemical and Oil Industries, Iran University of Science and Technology, Tehran, 2011.
  • A. Kolivand, S.H. Hashemabadi, Influence of Operational Conditions on Efficiency of Dewatering Hydrocyclone by CFD simulation, 13th National and 1st Regional International Chemical Engineering Congress, Razi University, Kermanshah, Iran, 2010.
  • S.M. Mirahmadi, S.H. Hashemabadi, Hydrodynamics Analysis Around Hydro-Desulfurization Quadraloble Catalysts with Using of Lattice Boltzmann Simulation, 13th National and 1st Regional International Chemical Engineering Congress, Razi University, Kermanshah, Iran, 2010.
  • A. Hassanvand, S.H. Hashemabadi, Interphase Mass Transfer Effects on Hydrodynamics of Gas-Liquid Systems by CFD Techniques, 13th National and 1st Regional International Chemical Engineering Congress, Razi University, Kermanshah, Iran, 2010.
  • S. Noroozi, S. H. Hashemabadi, Evaluation of Different Turbulence Models for CFD Simulation of Deoiling Hydrocyclones, 18th Annual International Conference on Mechanical Engineering-ISME, Sharif University of Technology, Tehran, Iran, 2010.
  • H. Boortalari, S. H. Hashemabadi, NEMD Simulation Prediction for Rheological Behavior of Linear Long Chain Hydrocarbons, 14th International Oil, Gas and Petrochemical Congress, Tehran, Iran, 2010.
  • Sooran Noroozi, Seyed Hassan Hashemabadi, Analysis of Entrance Chamber Design Effects on De-oiling Hydrocyclone Separation Efficiency with CFD Simulation, The 6th International Chemical Engineering Congress and Exhibition (IChEC), Kish, Iran, 2009.
  • F. Mirhashemi, S.H. Hashemabadi, Hydrodynamics Analysis of Quadrilobe Catalyst by CFD Simulation, The 6th International Chemical Engineering Congress and Exhibition (IChEC), Kish, Iran, 2009.
  • M. Eftekhardadkhah, S.H. Hashemabadi, Influence of Salinity, Surfactants and Power of Homogenizer on Droplet Size Distribution of Crude Oil Tehran Refinery in Water Emulsions, The 6th International Chemical Engineering Congress and Exhibition (IChEC), Kish, Iran, 2009.
  • S. Tavangar, S.H. Hashemabadi, A. Saberimoghadam, Numerical Modeling of Herschel–Bulkley Gels Flow through the Convergent Tube, 9th International Seminar on Polymer Science and Technology, Tahran, 2009.
  • S.H. Hashemabadi, F. Mirhashemi, Computation of Drag Coefficient for Infinite Catalytic Particles with non-Circular Cross Sections by CFD Techniques, 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.
  • S. Noroozi, S.H. Hashemabadi, Investigation of Separation Efficiency in Multi-Inlet de-Oiling Hydrocyclone by CFD Simulation, 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.
  • M. Rakhsha, S.H. Hashemabadi, Structural and Rheological Properties of Electrorheological Fluid and Simulation of Flow between Two Parallel Electrodes, , 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.
  • S.H. Hashemabadi, M. Eftekhardadkhah, CFD Simulation of Deoiling Wastewater Flotation Unit, 2nd National Conference on CFD Applications in Chemical Industries, Iran University of Science and Technology, 2009.
  • Hashemabadi S.H., M. Hassan Ghajar, CFD Simulation of Gelatin Freeze Drying, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 Oct. 2008.
  • Hashemabadi S.H., M. Eftekhar Dadkhah, Effect of Bubble and Droplet Shape on Flotation Time, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 Oct. 2008.
  • Hashemabadi S.H., S. Noroozi, Influence of Hydrocyclone’s Heads on Liquid-Liquid Separation Efficiency by CFD Simulation, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 Oct. 2008.
  • S. Haeri, S.H. Hashemabadi, CFD Simulation of Bubble Dynamics from a Submerged Orifice, 1st National Conference on CFD Application in Chemical Engineering, 15 May 2008, Razi University, Kermanshah.
  • A. Hassanvand, S.H. Hashemabadi, CFD Simulation of Pre-Polymer Pneumatic Conveying Line and Evaluation of Saltation Velocity, 1st National Conference on CFD Application in Chemical Engineering, 15 May 2008, Razi University, Kermanshah.
  • Maryam Hassan Ghajar, S.H. Hashemabadi, Simulation of vapor motion in Porous media at freeze drying process, 1st National Conference on CFD Application in Chemical Engineering, 15 May 2008, Razi University, Kermanshah.
  • S.H. Hashemabadi1, A.H. Ahmadi Motlagh, CFD Simulation of Heat Transfer from Finite Cylindrical Catalyst, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.
  • A. Amiri, S.H. Hashemabadi, 2D Lattice Boltzmann Model Benchmarking for Low Reynolds Poiseuille Flow through Channel,5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.
  • M. Firouzi, S. H. Hashemabadi, Analytical Solution for Influence of Yield Stress on Two Phase Stratified Flow through the Pipe, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.
  • S. Haeri, S. H. Hashemabadi, Experimental Study of non-Newtonian Falling Film Dynamics on Inclined Plate, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.
  • A. Hassanvand, S. H. Hashemabadi, CFD simulation of PVC Fluidized Bed Dryer Hydrodynamic, 5th International Chemical Engineering Congress (IChEC 2008), 2-5 Jan 2008, Kish Island, Iran.
  • R. Shariati, S.H. Hashemabadi, Selecting dryer type using fuzzy logic, 17thInternational Congress of Chemical and Process Engineering (CHISA 2006), 27-31 August 2006, Prague - Czech Republic.
  • S.H. Hashemabadi, F. Marzpoor, Viscosity Calculation with Molecular Dynamics Simulation of Couette Flow, 1st Iranian Applied Thermodynamics Conference, Isfahan.
  • S.M. Mirnajafizadeh S.H. Hashemabadi, Influence of Viscous Dissipation Effects on Viscoelastic Fluid Flowbetween Two Concentric Rotating Disks, The 5th International Conference on Polymer Science and Technology (ISPST2007), 23-25 October 2007, Sharif University of Technology.
  • S.M. Mirnajafizadeh S.H. Hashemabadi, Secondary Flows of SPTT non-LinearViscoelastic Fluid between Parallel Rotating Disks, The 5th International Conference on Polymer Science and Technology (ISPST2007), Sharif University of Technology.
  • S.M. Mirnajafizadeh S.H. Hashemabadi, Analytical Solution of Phan-Thien Tanner Viscoelastic Fluid in Planar and Circular Converging Flows, The 5th International Conference on Polymer Science and Technology (ISPST2007), Sharif University of Technology.
  • S.H. Hashemabadi, S. Haeri, Application of CFD Techniques to the Design of Multiphase Flow Pipelines, 1st IranianPipe & Pipeline Conference,July 17-18 2007, Iran Summit Hall, Tehran.
  • S.H. Hashemabadi, A. Dovali, Economical Evaluation of Iran Gas Transport lines Designs, 1st IranianPipe & Pipeline Conference,July 17-18 2007, Iran Summit Hall, Tehran.
  • S.H. Hashemabadi, S.M. Mirnajafizadeh, Analytical Solution of Viscous Dissipation Effects of SPTT Viscoelastic Fluids for Purely Tangential Annuli non-Isothermal Flow, European Congress of Chemical Engineering (ECCE-6),Copenhagen, 16-20 September, 2007.
  • S.H. Hashemabadi, F. Aghili, F. Shams, A Simple Freeze Dryer for Dehydration of Roses, European Congress of Chemical Engineering (ECCE-6), Copenhagen, 16-20 September, 2007.
  • S. Yaghoobi and S.H. Hashemabadi, Transverse Bed Motion Prediction by Rheological Analysis in Rotary Cylinder, 11th Iranian Chemical Engineering Congress,(ICHEC11), Tarbiat Modares University,2006.
  • Hashemabadi S.H and Kazempoor M., "Analytical Solution of Newtonian Fluid flow through Triangular Ducts, 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.
  • Beirami A. and Hashemabadi S.H., "Three Dimensional Simulation of a Counter-Current Ceramic Spray Dryer with using of Computational Fluid Dynamic (CFD) Techniques" 11th Iranian Chemical Engineering Congress,(ICHEC11), Tarbiat Modares University,2006.
  • Hassanvand A. and Hashemabadi S.H. "CFD Studies of Effective Parameters in Solid Pneumatic Conveying" 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University, 2006.
  • Bazmi M., Tajerian M. and Hashemabadi S.H. "Two Dimensional Flow Analysis for Cylindrical Catalysts in Trickled Bed Reactors with CFD Techniques" 11th Iranian Chemical Engineering Congress, (ICHEC11), Tarbiat Modares University,2006.
  • Hashemabadi S.H. and Mirnajafizadeh S.M, Analytical Solution for non-Linear Viscoelastic Fluid in Lubrication Theory, Asian Pacific Confederation of Chemical Engineering Congress,Kuala Lumpur, Malaysia, 2006.
  • Hashemabadi S.H., Rahmat M.M., Sotoodeh F., Mirnajafizadeh S.M., Molaei M., Numerical Analysis of Industrial Robot’s Spray Jet, Asian Pacific Confederation of Chemical Engineering Congress,Kuala Lumpur, Malaysia, 2006.
  • Hashemabadi S.H., Ahmadi Motlagh A., CFD application as a powerful tool for risk analysis of Chemical Processes” 1st National Conference on Safety Engineering, Loss Prevention & HSE Management, 28 Feb-2 March 2006, SharifUniversity of Technology.
  • Rashidi F., Mirzazadeh M., Hashemabadi S.H, Analytical Solution for Couette Flow of non-Linear Viscoelastic Fluid in Concentric Rotating Cylinders, 7th World Congress of Chemical Engineering, 10-14 July 2005, Glasgow.
  • Hashemabadi S.H. and Vahid A., Analytical Solution of Couette-Poiseulle Flow of non-Linear Viscoelastic Fluid through Annular Ducts, The Society of Rheology: 77thAnnual Meeting, Vancouver, British Columbia, Canada, 2005.
  • Hashemabadi S.H. and Kharaghani R., Mathematical Modeling of Calendaring Process for non-Linear Viscoelastic Fluid, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.
  • Hashemabadi S.H. and Mirnajafizada S.M., Analysis of Lubrication Theory for non-Linear Viscoelastic Fluid with Simplified Phan-Thien-Tanner (SPTT) Model, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.
  • Hashemabadi S.H. and Vahid A., Parametric Study of a non-Isothermal Tubular Reactor Performance by CFD Modeling, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.
  • Dehnavi M.A., Hashemabadi S.H. and Shahhosini S., CFD Simulation of Concentration Distribution in a Porous Catalyst Pellet Using FEMLAB, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.
  • Hashemabadi S.H., Sadrzadeh M. and Behjat  Y., Simulation of oxygen diffusion through the respiratory membrane,  10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.
  • Yaghoobi S., Hashemabadi S.H., Kasiri N., CFD Modleling of solid bed moving in rotary cylinder, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.
  • Hashemabadi S.H., Rahmat M.M., Sotoodeh F., Sadegh N., Molaei M. and Harirchian Saei S., Effect of Environmental Conditions on Rheological Properties ofSealers in Automotive Industry, ISPST 2005, Amirkabiruniversity, 2005.
  • Garnavi L., Kasiri N., Hashemabadi S.H., Computer Simulation of Fluidized Bed Dryer with Bubble Size Variation, 14th Int. Drying Syposium, IDS2004, 22-25 Aug, Sao Paulo, Brazil.
  • Mirzazadeh M., Rashidi F., Hashemabadi S.H., Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, Nov. 2004.
  • Kasiri N., Hashemabadi S.H., Khazraee M., Shahhosseini S., ­Mathematical Modeling and Computer Simulation ofContinuous Rotary Dryers, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran,Nov. 2004.
  • Hashemabadi S.H., Kharaghani R., The Effect of Different Spacers on Mass Transfer of Membranes, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran,Nov. 2004.
  • Hashemabadi S.H., Dehghani M.R." Importance of Cleanroom Technology for Reduction of Particle Defect in Automotive Paint" 3rd Conference of Paint, Coating and Chemicals, Amirkabir University, Tehran, Iran, 2004.
  • Hashemabadi S.H. and Etemad S.Gh., The Effect of Rounded Corners on the Secondary Flows of Viscoelastic Fluid in non-Circular Duct", 8th Iranian National Chemical Eng. Congress, Ferdowsi University, Mashad, Iran 2003.
  • Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault, J., Analytical solution of forced convection of nonlinear viscoelastic fluids between parallel plates with moving boundary, 15th International Congress of Chemical and Process Engineering  (CHISA 2002), August 25-29, 2002, Praha, Czech Republic.
  • Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Analytical solution of axial flow and heat transfer of viscoelastic fluid through annular duct, International Conference on Computational and Mathematical Methods in Science and Engineering (CMMSE-2002), September 20-25, 2002, Alicant, Spain.
  • Etemad S.Gh, Thibault, J. and Hahsemabadi, S.H., Calculation the pitot tube correction factor for Newtonian and non-Newtonian fluid, 52nd Canadian Chemical Engineering Conference, Vancouver, Canada, October 20-23, 2002.
  • Hashemabadi S.H. and Golkar Naranji M.R., Laminar non isothermal heat transfer of non-Newtonian fluids in pipe ", Second National Congress of Chemical Eng. AmirKabir University of Technology, (Tehran Polytechnic), Iran 1996.
     
     
    Patents
    • Wind Heater, 46618, 2007.
    • A New Burner for Heaters in Natural Gas City Gate Station (CGS), 80936, 2013.
       
      Books (in Persian)
    • “Multiphase CFD Simulation with Fluent” 2011.
    • “Industrial Chemical Cleaning” 2011.
    • “Industrial Flow Metering, Single Phase and Multi Phase” Publisher: Iran university of Science and Technology, 2013
    • "Process Equipments Selection (Multiphase Separators) and Design",Publisher: Iran University Press, 2015.
    • “Fluid Mechanics”, Publisher: Iran CFD Expert Center, 2015.
    • Translation of “Pipe Flow 2: Multi-phase Flow Assurance, Ove Bratland” (In process)
       
      Computer Skills
  • Knowledge of main operating systems : Windows
  • Language: Fortran, Qbasic, Visual Basic (VB)
  • Chemical Eng. Software: Hysys, Chemcad
  • Expert in CFD Softwares(Ansys Fluent, Fidap, COMSOL)
  • Other: Matlab, Maple, Office 2000, Grapher, Tecplot, Autocad 2000, Statistica, etc.
     
    Interest
    Applications of CFD in Chemical and Petroleum Engineering, Rheology, Fluid Mechanic, Modeling and Process design, Numerical Analysis (Finite Volume), Heat Transfer, Drying
     


View: 16320 Time(s)   |   Print: 2581 Time(s)   |   Email: 10 Time(s)   |   0 Comment(s)