[1] Sadeghi, M., Kalantar, M. “Probabilistic analysis of wind turbine planning using continuous genetic algorithm in distribution systems"، 2014 5th Conference on Thermal Power Plants, CTPP 2014, pp. 137-142, 2015.

[2] Shafaie, R., Kalantar, M. “Transient performance of a large scale wind turbine HTS synchronous generator under short circuit conditions”, 2014 5th Conference on Thermal Power Plants, CTPP 2014, pp. 99-102, 2015.

[3] Rezaei, N., Kalantar, M.,  "A novel frequency aware energy management system for a droop controlled microgrid ”, 5^th Smart Grid Conference, Dec. 2014 .

[4] Sadeghi, M., Kalantar, M. “Solar units planning using continuous genetic algorithm to reduce energy loss cost of the distribution system”, 2014 14th International Conference on Environment and Electrical Engineering, EEEIC 2014 - Conference Proceedings, pp. 127-131, 2014 .

[5] Sadeghi, M., Kalantar, M. “Probabilistic analysis of wind turbine planning in distribution systems”, Canadian Conference on Electrical and Computer Engineering, art. no. 6901037, 2014.

[6] Shafaie, R., Kalantar, M. “Loss optimization of a 10 MW class HTS synchronous generator based wind turbines”, 2014 14th International Conference on Environment and Electrical Engineering, EEEIC 2014 - Conference Proceedings, pp. 29-33, 2014.

[7] Sadeghi, M., Kalantar, M. “Allocation of solar units to reduce annual costs of the distribution system”, 2013 13th International Conference on Environment and Electrical Engineering, EEEIC 2013 - Conference Proceedings, pp. 132-137, 2013.

[8] Ghazavi Dozein, M., Ansari, J., Shahbazi, H.R., Kalantar, M. “Optimal distribution voltage control through a sub-framework in the reactive power management on the smart grid”, Smart Grid Conference 2013, SGC 2013, art. no. 6733786, pp. 153-159, 2013.

[9] Heydarian-Forushani, E., Kalantar, M., Parsafar, A. “Wind-thermal economic and environmental scheduling incorporating Demand Response”, Smart Grid Conference 2013, SGC 2013, pp. 36-40, 2013.

[10] Sadeghi, M., Kalantar, M. “Allocation and sizing of a DG unit considering ZIP load model”, Smart Grid Conference 2013, SGC 2013, pp. 252-258, 2013.

[11] M.Sadeghi, M.Kalantar, "Multi-Objective Placement of Dispersed Generation Unit in Distribution System", 2^nd Conference and Exposition on Electricity Distribution, CIRED2013, Niroo Research Center, Tehran, Iran, 2013.

[12] Hosseini, H., Kalantar, M. “Transient stability enhancement of power system including wind farms using improved ECS”, Proceedings - 2012 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems, PEDG 2012, pp. 782-787, 2012.

[13] Hosseini, H., Kalantar, M. “Repetitive control scheme for an ECS to improve power quality of grid connected wind farms using SVM”, 2012 2nd Iranian Conference on Smart Grids, ICSG 2012, 2012.

[14] Hosseini, H., Kalantar, M. “An ECS-control scheme to improve power quality in grid connected wind farms”, Proceedings - 6th Asia International Conference on Mathematical Modelling and Computer Simulation, AMS 2012, pp. 173-178, 2012.

[15] Dozein, M.G., Ansari, J., Kalantar, M. “Economic Dispatch incorporating wind power plant using Particle Swarm Optimization”, 2012 2nd Iranian Conference on Renewable Energy and Distributed Generation, ICREDG 2012, pp. 178-182, 2012.

[16] M. Choobineh and M. Kalantar, “A multiobjective optimization model for short term operation of distribution network in the presence of distributed generation”, in Proc. International Conference on Clean Electrical Power, ICCEP11, Ischia, Italy, 14-16 June 2011.

[17] A.H. Khazali, A. Parizad, M. Asgari, H. Golzar, and M. Kalantar, “Fuzzy multi-objective reactive power clearing by a fuzzy adaptive PSO approach”, in Proc. 19th Iranian Conference on Electrical Engineering, ICEE2011, Tehran, Iran, 17-19 May 2011, pp. 1-6.

[18] A. Tofighi and M. Kalantar, “Modeling and simulation of photovoltaic cell considering dynamic thermal model”, in Proc. 19th Iranian Conference on Electrical Engineering, ICEE2011, Tehran, Iran, 17-19 May 2011, pp. 1-6.

[19] A. Ghaderi, A. Esmaeilian, and M. Kalantar, “A novel islanding detection method for constant current inverter based distributed generations”, in Proc. 10th International Conference on Environment and Electrical Engineering, EEEIC2011, Rome, Italy, 8-10 May 2011, pp. 1-4.

[20] M. Choobineh and M. Kalantar, “Introduction of a novel operational framework for distribution network considering distributed generations and load elasticity effect”, in Proc. 16th Conference on Electrical Power Distribution Networks, EPDC2011, Bandarabbas, Iran, 19-20 April 2011, pp. 1-6.

[21] A. Ghaderi and M. Kalantar, “Investigation of influential factors on passive islanding detection methods of inverter based distributed generation”, in Proc. 2nd Power Electronics, Drive Systems & Technology, PEDST011, Tehran, Iran, 16-17 February 2011.

[22] A. Ghaderi and M. Kalantar, “Load parameters effect on relays performance for islanding detection”, in Proc. 25th International Power System Conference, PSC2010, Tehran, Iran, 8-10 November 2010.

[23] M. Aghasi, V. Faraji, D. Arab-Khaburi, and M. Kalantar, “Direct power control for doubly-fed induction generator using indirect matrix converters”, in Proc. 25th International Power System Conference, PSC2010, Tehran, Iran, 8-10 November 2010.

[24] A. Parizad, A.H. Khazali, and M. Kalantar, “Optimal placement of distributed generation with sensitivity factors considering voltage stability and losses indices”, in Proc. 18th Iranian Conference on Electrical Engineering, ICEE 2010, Isfahan, Iran, 11-13 May 2010, pp. 847-854.

[25] A. Parizad, A.H. Khazali, and M. Kalantar, “Sitting and sizing of distributed generation through harmony search algorithm for improve voltage profile and reduction of THD and losses”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010, pp. 1-7.

[26] A.H. Khazali, A. Parizad, and M. kalantar, “Optimal reactive/voltage control by an improved harmony search algorithm”, in Proc. 23rd Canadian Conference on Electrical and Computer Engineering, CCECE 2010, Calgary, Canada, 2-5 May 2010.

[27] A. Parizad, A.H. Khazali, and M. kalantar, “Distributed generation effects on unbalanced distribution network losses considering cost and security indices”, in Proc. First Iranian Conference on Renewable Energies and Distributed Generation, ICREDG2010, Birjand, Iran, 9-11 March 2010.

[28] S. Dehghan, H. Sabouri, M. kalantar, and A. Kazemi, “Application of differential evolution algorithm to design a hydrogen-based wind/PV considering reliability indices”, in Proc. First Iranian Conference on Renewable Energies and Distributed Generation, ICREDG2010, Birjand, Iran, 9-11 March 2010.

[29] A. Tofighi and M. Kalantar, “Thermal model of photovoltaic systems and temperature impact on electrical parameters”, in Proc. 13th Middle East Power Systems Conference, MEPCON2009, Assiut University, Egypt, December 20-23, 2009, pp.413-419.

[30] A.H. Khazali and M. Kalantar, “Reactive/voltage control by A multi-agent based PSO approach considering voltage stability”, in Proc. 24th International Power System Conference, PSC2009, Tehran, Iran, 16-19 November 2009.

[31] S. M. Mousavi G. and M. Kalantar , “Supervisory and adaptive controllers for extraction of maximum energy in a stand-alone variable speed wind turbine”, in Proc. 5^th International Conference on Technical and Physical of Power Engineering, TPE2009, Bilbao, Spain, 3-5 September 2009.

[32] M. Kalantar , S. Jamali, and H. Shateri, “Load flow method for distribution networks with dispersed generation units”, in Proc. 44^th International Universities Power Engineering Conference, UPEC2009, Glasgow, Scotland, 1-4 September 2009.

[33] M. Ranjbar, M. Kalantar , and A.R. Jalilian, “A Parallel Hybrid Filter with a Novel Control Strategy for Power Quality Improvement”, in Proc. 17^th Iranian Conference on Electrical Engineering, ICEE2009, Tehran, Iran, 10-12 May 2009, vol. 2, pp. 518-523.

[34] M. Kalantar , S. Jamali, and H. Shateri, “Measured impedance for faults on line behind and second circuit of a double circuit line”, in Proc. 40^th North American Power Symposium, NAPS 2008, Calgary, Alberta, Canada, 28-30 September 2008.

[35] P. Baghery and M. Kalantar, “Evaluating of voltage stability in power systems with IG and DFIG wind turbines”, in Proc. 40^th North American Power Symposium, NAPS 2008, Calgary, Alberta, Canada, 28-30 September 2008.

[36] M. Rashidi, M. A. Gaffarzadeh F., S. Hosseinzadeh, M. Kalantar, “Energy storage systems in power networks”, in Proc. 4^th International Conference on Technical and Physical Problems of Power Engineering, TPE2008, Pitesti, Romania, 4-6 September 2008, pp. III - 43-47.

[37] M. Kalantar , M. Rashidi, N. Samsunchi, and A. Kazemi, “ Research of using (BBPLC) Broad Band Power Line Communication in power networks ”, in Proc. 4^th International Conference on Technical and Physical Problems of Power Engineering, TPE2008, Pitesti, Romania, 4-6 September 2008, pp. III - 25-29.

[38] M. Kalantar and P. Poushang Baghery, “Comparison of dynamic behavior of doubly fed induction generator and induction generator during grid faults”, in Proc. 4^th International Conference on Technical and Physical Problems of Power Engineering, TPE2008, Pitesti, Romania, 4-6 September 2008, pp. II - 68-72.

[39] M. Gitizadeh and M. Kalantar, “A new approach for FACTS devices allocation to enhance voltage stability using sensitivity based genetic algorithm”, in Proc. 43^rd International Universities Power Engineering Conference, UPEC2008, Padova, Italy, 1-4 September 2008.

[40] S. Jamali, M. Kalantar, and H. Shateri, “Effects of SMES equipped STATCOM on distance relay ideal tripping characteristic”, in Proc. IEEE/PES Transmission and Distribution Conference and Exposition, T&D Latin America 2008, Bogota, Colombia, 13-15 August 2008.

[41] H. Raoufi and M. Kalantar, “Reactive power rescheduling with generator ranking for voltage stability improvement”, in Proc. 2008 IEEE/PES General Meeting, IEEE/PES GM2008, Pittsburg, Pennsylvania, USA, 20-24 July 2008.

[42] A. R. Tajfar, M. Kalantar, R. Iravani, and K. Zare, “Coordinated fuzzy logic voltage/var controller in distribution networks”, in Proc. IEEE International Conference on Industrial Technology, ICIT2008, Chengdu, China, 21-24 April 2008.

[43] L. Ghods and M. Kalantar, “Methods for long-term electric load demand forecasting: A comprehensive investigation”, in Proc. IEEE International Conference on Industrial Technology, ICIT2008, Chengdu, China, 21-24 April 2008.

[44] M. Gitizadeh and M. Kalantar, “A new approach for congestion management via optimal location of FACTS devices in deregulated power systems”, in Proc. Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, DRPT2008, Nanjing, China, 6-9 April 2008, pp. 1592-1597.

[45] S. M. Mousavi Badejani, M. A. S. Masoum, and M. Kalantar, “Optimum Design and Modeling of Stand-Alone Hybrid PV-Wind Systems”, in Proc. Australasian Universities Power Engineering Conference, AUPEC07, Perth, Australia, 9-12 December 2007, pp. 894-900.

[46] V. Salehi, S. Aslanzadeh, and M. Kalantar, “Maintaining of islanding condition of distributed generation for redial distribution system by D-STATCOM”, in Proc. Australasian Universities Power Engineering Conference, AUPEC07, Perth, Australia, 9-12 December 2007, pp. 471-477.

[47] F. Karbalaei, M. Kalantar, and A. Kazemi, “A novel method for emergency voltage control”, in Proc. Australasian Universities Power Engineering Conference, AUPEC07, Perth, Australia, 9-12 December 2007, pp. 271-276.

[48] F. Karbalaei, M. Kalantar, and A. Kazemi, “On line diagnosis of tap changing action effects based on the concept of attraction region”, in Proc. 8^th International Power Engineering Conference, IPEC2007, Singapore, 3-6 December 2007.

[49] H. Raoufi and M. Kalantar, “Reactive power rescheduling with generator ranking for improving voltage stability margin”, in Proc. Conference on Power Engineering, 2007 Large Engineering Systems, LESCOPE2007, Montreal, Quebec, Canada, 10-12 October 2007, pp. 218-225.

[50] M. Gitizadeh and M. Kalantar, “A new approach for optimal location of TCSC in a power system to enhance voltage stability: steady state studies”, in Proc. 42^nd International Universities Power Engineering Conference, UPEC2007, Brighton, UK, 4-6 September 2007, pp. 570-575.

[51] M. Kalantar , Rahman Dashti, and Reza Dashti, “Combination of Network Reconfiguration and Capacitor Placement for Loss Reduction in Distribution System with Based Genetic Algorithm”, in Proc. 41^st International Universities Power Engineering Conference, UPEC2006, Newcastle, UK, 6-8 September 2006, pp. 308-312.

[52] A. Kazemi, S. M. Mousavi Badejani, and M. Kalantar, “Synthetic application of FPSS and TCSC for improvement of voltage and current profiles in electrical power systems”, in Proc. IEEE Conference on Industrial Electronics and Applications, ICIEA2006, Singapor, 24-28 May 2006.

[53] S. Jamali, M. Kalantar, and H. Shateri, “Effects of instrument transformers location on measured impedance by distance relay in presence of UPFC”, in Proc. 2006 IEEE Power India Conference, New Delhi, India, 10-12 April 2006.

[54] A. K. Jalali, M. Gitizadeh, and M. Kalantar, “A new approach for robust stabilizing controller in an interconnected power system using LMIS”, in Proc. International Universities Power Engineering Conference, UPEC2005, Cork, Ireland, 2005.

[55] A. Kazemi, M. Kalantar, and F. Karbalaei, “A new approach to control static var compensators for damping of small-signal oscillations using bang-bang control method”, in Proc. International Universities Power Engineering Conference, UPEC2005, Cork, Ireland, 2005.

[56] M. Sedighizadeh, M. Kalantar, S. Esfandeh, and D. Arzaghi Harris, “Nonlinear model identification and control of wind turbine using wavelets”, in Proc. IEEE Conference on Control Applications, Toronto, Canada, 28-31 August 2005, pp. 1057-1062.

[57] M. Kalantar and M. Sedighizadeh, “Adaptive-neural PID control of wind energy conversion systems using wavenets”, in Proc. 2005 IEEE International Symposium on Intelligent Control, and Mediterranean Conference on Control and Applications, MED05, Limassol, Cyprus, 27-29 June 2005, pp. 456-459.

[58] M. Kalantar , N. M. Tabatabaei, and M. Rashidi, “Control and simulation of fault and change effect in a back to back system of high voltage direct current network”, in Proc. International Conference on Fizika-2005, Baku, Azerbaijan, 7-9 June 2005, pp. 473-476.

[59] M. Kalantar , A. Kazemi, and A. Tajfar, “Coordinated fuzzy control of cascaded tap changers in distribution network”, in Proc. Iranian Conference on Electrical Engineering, ICEE2005, Zanjan, Iran, 10-12 May 2005, vol. 4, pp. 775-781.

[60] M. Sedighizadeh, D. Arzaghi Harris, and M. Kalantar, “Adaptive PID control of wind energy conversation systems using RASP1 mother wavelet basis function networks”, in Proc. 2004 IEEE Region 10 Conference, TENCON2004, Chiang Mai, Thailand, 21-24 November 2004, vol. 3, pp. 524-527.

[61] D. Arzaghi Harris, M. Sedighizadeh, and M. Kalantar, “A new model for double output induction generator in wind farm using integral manifold theory”, in Proc. 2004 IEEE Region 10 Conference, TENCON2004, Chiang Mai, Thailand, 21-24 November 2004, vol. 3, pp. 456-459.

[62] M. Sedighizadeh and M. Kalantar, “A new approach for control of wind energy conversion systems”, in Proc. 19^th International Power System Conference, PSC2004, Tehran, Iran, 22-24 November 2004.

[63] F. Karbalaei, S. Jadid, and M. Kalantar, “ A novel method for fast computation of saddle-node bifurcation in power systems using an optimization technique”, in Proc. 19^th International Power System Conference, PSC2004, Tehran, Iran, 22-24 November 2004.

[64] M. Kalantar and M. Sedighizadeh, “Harmonic analysis and performance improvement of a wind driven double output induction generator”, in Proc. International Universities Power Engineering Conference, UPEC2004, Bristol, United Kingdom, 6-8 September 2004, vol. 1, pp. 664-668.

[65] M. Sedighizadeh and M. Kalantar, “Adaptive PID control of wind energy conversion system using wavelets”, in Proc. International Universities Power Engineering Conference, UPEC2004, Bristol, United Kingdom, 6-8 September 2004, vol. 1, pp. 299-303.

[66] M. Sedighizadeh and M. Kalantar, “A new model for doublet output induction generator with two rotor circuits”, in Proc. International Conference on Applied Simulation and Modeling, IASTED ASM2004, Rhodes, Greece, 28-30 June 2004, pp. 522-527.

[67] S. Talebi Rafsanjani, M. Sedighizadeh, M. Kalantar, and M. C. Dadashzadeh, “Load modeling for power flow and transient stability computer studies with LOADMOD software”, in Proc. International Conference on Applied Simulation and Modeling, IASTED ASM2004, Rhodes, Greece, 28-30 June 2004, pp. 522-527.

[68] M. Sedighizadeh and M. Kalantar, “Adaptive self turning control of wind energy conversion system using morlet mother wavelet basis functions networks”, in Proc. IEEE Conference on Control and Automation, MED04, Kusadasi, Turkey, 6-9 June 2004.

[69] M. Sedighizadeh and M. Kalantar, “A wind park reduced order model using integral manifold theory”, in Proc. International Conference on Modeling, Identification and Control, IASTED MIC2004, Grindelwald, Switzerland, 23-25 February 2004, pp. 281-286.

[70] M. Gholamrezaeei, M. A. S. Masoum, and M. Kalantar, “Parallel combination of passive and hybrid filters for harmonic mitigation”, in Proc. 18^th International Power System Conference, PSC2003, Tehran, Iran, 2003, pp. 7-15.

[71] M. Sedighizadeh, M. Kalantar, M. R. Dadashzadeh, S. Sabbagh, A. A. Mohseni, “Load modeling for power flow and transient stability computer studies with load mod software”, in Proc. 18^th International Power System Conference, PSC2003, Tehran, Iran, 2003, pp. 1-12.

[72] M. Kalantar and M. Sedighizadeh, “Comparison between batteries and fuel cells and environmental evaluation of the PV-Fuel cell hybrid power plant”, in Proc. International Universities Power Engineering Conference, UPEC2003, Thessaloniki, Greece, 1-3 September 2003, pp. 577-580.

[73] M. Kalantar , “Hierarchical fuzzy system controller for an active power line conditioner”, in Proc. International Universities Power Engineering Conference, UPEC2002, Stafford, United Kingdom, 9-11 September 2002, pp. 52-56.

[74] M. Kalantar , M. Sedighizadeh, and S. Sedighizadeh, “Environmental evaluation of the PV-fuel cell hybrid power plant”, in Proc. 17^th International Power System Conference, PSC2002, Tehran, Iran, 2002, vol.8, pp. 41-45.

[75] M. Kalantar , M. Sedighizadeh, and M. Ahmadipour, “Selection between batteries and fuel cells for PV power backup”, in Proc. 17^th International Power System Conference, PSC2002, Tehran, Iran, 2002, vol. 3, pp. 19-25.

[76] M. R. Jahed Motlagh, M. Kalantar, and M. Sedighizadeh, “Application of H-infinity damping controller at Bandarabbas power station”, in Proc. 16^th International Power System Conference, PSC2001, Tehran, Iran, 2001, pp. 79-85.

[77] M. Kalantar and J. Jiang, “Power generation using photovoltaic induction generator in an isolated power network”, in Proc. 16^th International Power System Conference, PSC2001, Tehran, Iran, 2001, pp. 15-19.

[78] M. Kalantar , “Active power line conditioner optimum placement using Fuzzy controller”, in Proc. 2001 Joint 9^th IFSA Word Congress and 20^th NAFIPS International Conference, Vancouver, Canada, 25-28 July 2001, pp. 245-250.

[79] M. Kalantar , “Superconductors”, in Proc. Second National Energy Congress, Tehran, Iran, 18-20 May 1999, pp. 19-38.

[80] M. Kalantar , “Application of photovoltaic system at maximum power with MPPT, invertors and voltage regulator”, in Proc. Power Plant Industrial Conference, PPIC, Tehran, Iran, 14-15 September 1998, pp. 262-281.

[81] M. Kalantar , “Photovoltaic driven self-excited induction generator”, in Proc. Third International Conference on Solar Electricity, Sharjeh, UAE, 21-25 March 1998.

[82] M. Kalantar , “Superconductors – A high capacity energy storage unit”, in Proc. International Institute for Applied Systems Analysis, IIASA, Laxenburg, Austria, 23-25 June 1997, pp. 1-12.

[83] M. Kalantar , “Control and dynamics of wind-diesel turbine generators”, in Proc. International Conference on Modeling and Simulation, IASTED MS1997, Pittsburgh, USA, 15-17 May 1997, pp. 1-6.

[84] M. Kalantar , “Wind turbine power plants – System configuration and economic considerations”, in Proc. International Conference on Energy, Economy, and Environment, IEW/JSER, Osaka, Japan, 25-27 June 1996, pp. 123-134.

[85] M. Kalantar , “Power quality improving responses of the hybrid wind-diesel turbines”, in Proc. International Conference on Energy, Economy, and Environment, IEW/JSER, Osaka, Japan, 25-27 June 1996, pp. 113-122.

[86] M. Kalantar , “A modern wind turbine power conversion system”, in Proc. International Institute for Applied Systems Analysis, IIASA, Laxenburg, Austria, June 1995.

[87] M. Kalantar , “Wind energy conversion using a self-excited induction generator”, in Proc. Iranian Conference on Electrical Engineering, ICEE95, Tehran, Iran, May 1995, vol. power, pp. 9-20.

[88] M. Kalantar , “Future of Energy in Iran”, Workshop on Energy, COMESTECH, Al Ain, UAE, November 1994.

[89] M. Kalantar , S. C. Tripathy, and R. Balasubramanian, “Studies of stability and parameter optimization technique for a wind-diesel turbine generators”, in Proc. Iranian Conference on Electrical Engineering, ICEE94, Tehran, Iran, May 1994, vol. power, pp. 164-173.

[90] M. Kalantar , S. C. Tripathy, R. Balasubramanian, and S. S. Murthy, “Studies on the use of self-excited induction generator for wind energy conversation”, in Proc. Living in the Green House, ANZSES, Auckland, New Zealand, 28 November-1 December 1990, pp. 343-351.

[91] S. C. Tripathy, S. S. Murthy, and M. Kalantar, “3-phase self excited induction generator for wind energy – Analytical technique and experimental results”, in Proc. International Energy Conference and Exposition, ENERGEX, Tripoly, Libya, 25-30 November 1990, vol. 3-XVIII, pp. 29-38.

[92] M. Kalantar , S. C. Tripathy, and S. S. Murthy, “Load characteristics of single-phase self-excited induction generator for non-conventional power generation”, in Proc. International Conference on Control and Modeling, IASTED, Tehran, Iran, 17-20 July 1990.

[93] M. Kalantar , S. C. Tripathy, and S. S. Murthy, “Single phase self-excited induction generator for non-conventional power generation”, in Proc. International Conference on Modeling and Simulation, IASTED MS1990, Innsbruck, Austria, 19-22 February 1990, pp. 226-229.